GIFSICLE(1)

NAME
gifsicle - manipulates GIF images and animations

SYNOPSIS
gifsicle [options, frames, and filenames]...

DESCRIPTION
gifsicle creates, edits, manipulates, and prints information about GIF images and animations.

Gifsicle normally processes input GIF files according to its command line options and writes the result to the standard output. The option, for example, tells gifsicle to interlace its inputs: gifsicle -i < pic.gif > interlaced-pic.gif

By default, gifsicle combines two or more input files into a “flipbook” animation: gifsicle pic1.gif pic2.gif pic3.gif > animation.gif Use options like to tune your animations.

To modify GIF files in place, use the option. With gifsicle will modify the files you specify instead of writing a new file to the standard output. To interlace all the GIFs in the current directory, you could say: gifsicle --batch -i *.gif

New users may want to skip to the Examples section at the end.

CONCEPT INDEX
Concepts are on the left, relevant gifsicle options are on the right.

Image transformations

COMMAND LINE
gifsicle's command line consists of GIF input files and options. Most options start with a dash (-) or plus (+); frame selections, a kind of option, start with a number sign (#). Anything else is a GIF input file.

gifsicle reads and processes GIF input files in order. If no GIF input file is given, or you give the special filename ‘-’, it reads from the standard input.

gifsicle exits with status 0 if there were no errors and status 1 otherwise.

OPTIONS
Every option has a long form, You don't need to type the whole long descriptive name, just enough to make it unambiguous.

Some options also have a short form, You can combine short options if they don't take arguments: is the same as But be careful with options that do take arguments: means not

Many options also have a converse, which turns off the option. You can turn off a short option by saying instead.

  Mode Options
Mode options tell gifsicle what kind of output to generate. There can be at most one, and it must precede any GIF inputs.

Combine all GIF inputs into one file with multiple frames and write that
    file to the standard output. This is the default mode.

Modify each GIF input in place by reading and writing to the same filename.
    (GIFs read from the standard input are written to the standard output.)

Create an output GIF for each frame of each input file. The output GIFs are
    named ‘xxx.000’, ‘xxx.001’, and so on, where ‘xxx’ is the name of the input file (or whatever you specified with and the numeric extension is the frame number.

Same as
    but write any named frames to files ‘xxx.name’ instead of ‘xxx.frame-number’. Frames are named using the option.

  General Options
General options control the information gifsicle prints and where it writes its output. The info options and can be turned off with

Print a human-readable description of each input GIF to the standard
    output, or whatever file you specify with This option suppresses normal output, and cannot be combined with mode options like If you give two or options, however, information is printed to standard error, and normal output takes place as usual.

Like
    but also print information about input files' colormaps.

Like
    but also print any unrecognized GIF extensions in a hexdump(1)-like format.

Like
    but also print information about compressed image sizes.

Print usage information and exit.

Send output to
    file. The special filename ‘-’ means the standard output.

Print progress information (files read and written) to standard
    error.

Suppress all warning messages.

Exit with status 1 when encountering a very erroneous GIF. Default is to
    muddle on.

Print the version number and some short non-warranty information and exit.

Write slightly larger GIFs that avoid bugs in some other GIF
    implementations. Some Java and Internet Explorer versions cannot display the correct, minimal GIFs that Gifsicle produces. Use the option if you are having problems with a particular image.

Conserve memory usage at the expense of processing time. This may be useful
    if you are processing large GIFs on a computer without very much memory. Or say

Allow input files to contain multiple concatenated GIF images. If a
    filename appears multiple times on the command line, gifsicle will read a new image from the file each time. This option can help scripts avoid the need for temporary files. For example, to create an animated GIF with three frames with different delays, you might run "gifsicle --nextfile -d10 - -d20 - -d30 - > out.gif" and write the three GIF images, in sequence, to gifsicle's standard input.

Like
    but read as many GIF images as possible from each file. This option is intended for scripts. For example, to merge an unknown number of GIF images into a single animation, run "gifsicle --multifile - > out.gif" and write the GIF images, in sequence, to gifsicle's standard input. Any frame selections apply only to the last file in the concatenation.

  Frame Selections
A frame selection tells gifsicle which frames to use from the current input file. They are useful only for animations, as non-animated GIFs only have one frame. Here are the acceptable forms for frame specifications.

#num
    Select frame num. (The first frame is Negative numbers count backwards from the last frame, which is
#num1-num2
    Select frames num1 through num2.
#num1-
    Select frames num1 through the last frame.
#name
    Select the frame named name.

The ‘#’ character has special meaning for many shells, so you generally need to quote it.

For example, gifsicle happy.gif "#0" uses the first frame from happy.gif; gifsicle happy.gif "#0-2" uses its first three frames; and gifsicle happy.gif "#-1-0" uses its frames in reverse order (starting from frame #-1 -- the last frame -- and ending at frame #0 -- the first).

The action performed with the selected frames depends on the current mode. In merge mode, only the selected frames are merged into the output GIF. In batch mode, only the selected frames are modified; other frames remain unchanged. In explode mode, only the selected frames are exploded into output GIFs.

  Frame Change Options
Frame change options insert new frames into an animation or replace or delete frames that already exist. Some things -- for example, changing one frame in an animation -- are difficult to express with frame selections, but easy with frame changes.

Delete
    frames from the input GIF.

Insert
    other-GIFs before frame in the input GIF.

Append
    other-GIFs to the input GIF.

Replace
    frames from the input GIF with other-GIFs.

--done
    Complete the current set of frame changes.

The frames arguments are frame selections (see above). These arguments always refer to frames from the original input GIF. So, if ‘a.gif’ has 3 frames and ‘b.gif’ has one, this command gifsicle a.gif --delete "#0" --replace "#2" b.gif will produce an output animation with 2 frames: ‘a.gif’ frame 1, then ‘b.gif’.

The other-GIFs arguments are any number of GIF input files and frame selections. These images are combined in merge mode and added to the input GIF. The other-GIFs last until the next frame change option, so this command replaces the first frame of ‘in.gif’ with the merge of ‘a.gif’ and ‘b.gif’: gifsicle -b in.gif --replace "#0" a.gif b.gif

This command, however, replaces the first frame of ‘in.gif’ with ‘a.gif’ and then processes ‘b.gif’ separately: gifsicle -b in.gif --replace "#0" a.gif --done b.gif

Warning: You shouldn't use both frame selections and frame changes on the same input GIF.

  Image Options
Image options modify input images -- by changing their interlacing, transparency, and cropping, for example. Image options have three forms: and The form selects a value for the feature, the form turns off the feature, and the form means that the feature's value is copied from each input. The default is always For example, sets the background color to blue, turns the background color off (by setting it to 0), and uses input images' existing background colors. You can give each option multiple times; for example, gifsicle -b -O2 -i a.gif --same-interlace b.gif c.gif will make ‘a.gif’ interlaced, but leave ‘b.gif’ and ‘c.gif’ interlaced only if they were already.

Set the output GIF's background to
    color. The argument can have the same forms as in the option below.

Crop the following input frames to a smaller rectangular area. The top-left
    corner of this rectangle is (x1,y1); you can give either the lower-right corner, (x2,y2), or the width and height of the rectangle. In the x1,y1+widthxheight form, width and height can be zero or negative. A zero dimension means the cropping area goes to the edge of the image; a negative dimension brings the cropping area that many pixels back from the image edge. For example, will shave 2 pixels off each side of the input image. Cropping happens before any rotation, flipping, resizing, or positioning.

Crop any transparent borders off the following input frames. This happens
    after any cropping due to the option. It works on the raw input images; for example, any transparency options have not yet been applied.

Flip the following frames horizontally or vertically.

Turn interlacing on.

Set the output logical screen to
    widthxheight. sets the output logical screen large enough to include all output frames, while sets the output logical screen large enough to include all input logical screens. is a synonym for

Set the following frames' positions to
    (x,y). means Normally, places every succeeding frame exactly at x,y. However, if an entire animation is input, x,y is treated as the position for the animation.

Rotate the following frames by 90, 180, or 270 degrees.
    turns off any rotation.

Make
    color transparent in the following frames. Color can be a colormap index (0-255), a hexadecimal color specification (like "#FF00FF" for magenta), or slash- or comma-separated red, green and blue values (each between 0 and 255).

  Extension Options
Extension options add non-visual information to the output GIF. This includes names, comments, and generic extensions.

Add an application extension named
    app-name and with the value extension to the output GIF. removes application extensions from the input images.

Add a comment,
    text, to the output GIF. The comment will be placed before the next frame in the stream. removes comments from the input images.

Add an extension numbered
    number and with the value extension to the output GIF. Number can be in decimal, octal, hex, or it can be a single character like ‘n’, whose ASCII value is used. (or removes extensions from the input images.

Set the next frame's name to
    text. This name is stored as an extension in the output GIF (extension number 0xCE, followed by the characters of the frame name). removes name extensions from the input images.

  Animation Options
Animation options apply to GIF animations, or to individual frames in GIF animations. As with image options, most animation options have three forms, and and you can give animation options multiple times; for example, gifsicle -b a.gif -d50 "#0" "#1" -d100 "#2" "#3" sets the delays of frames 0 and 1 to 50, and frames 2 and 3 to 100.

Set the delay between frames to
    time in hundredths of a second.

Set the disposal method for the following frames to
    method. A frame's disposal method determines how a viewer should remove the frame when it's time to display the next. Method can be a number between 0 and 7 (although only 0 through 3 are generally meaningful), or one of these names: none (leave the frame visible for future frames to build upon), asis (same as "none"), background (or bg) (replace the frame with the background), or previous (replace the frame with the area from the previous displayed frame). means

Set the Netscape loop extension to
    count. Count is an integer, or forever to loop endlessly. If you supply a option without specifying count, Gifsicle will use forever. (the default) turns off looping.

    Set the loop count to one less than the number of times you want the animation to run. An animation with will show every frame once; will loop once, thus showing every frame twice; and so forth. Note that is equivalent to not

Attempt to shrink the file sizes of GIF animations.
    Level determines how much optimization is done; higher levels take longer, but may have better results. There are currently three levels:

    Store only the changed portion of each image. This is the default.
    Store only the changed portion of each image, and use transparency.
    Try several optimization methods (usually slower, sometimes better results).

    Other optimization flags provide finer-grained control.

    Preserve empty transparent frames (they are dropped by default).

    You may also be interested in other options for shrinking GIFs, such as and Note that does not guarantee to shrink file size, and in rare cases, even may actually enlarge file size.

Unoptimize GIF animations into an easy-to-edit form.

    GIF animations are often optimized (see to make them smaller and faster to load, which unfortunately makes them difficult to edit. changes optimized input GIFs into unoptimized GIFs, where each frame is a faithful representation of what a user would see at that point in the animation.

  Image Transformation Options
Image transformation options apply to entire GIFs as they are read or written. They can be turned off with

Resize the output GIF to the given
    width and height. If width or height is an underscore ‘_’, that dimension is chosen so that the aspect ratio remains unchanged. Resizing happens after all input frames have been combined and before optimization. Resizing uses logical screen dimensions; if the input stream has an unusual logical screen (many GIF displayers ignore logical screens), you may want to provide (or to reset it so gifsicle uses image dimensions instead. See also

Resize to a given width or height, preserving aspect ratio. Equivalent to
    or

Resize the output GIF to fit a rectangle with dimensions
    widthxheight. The aspect ratio remains unchanged. The option only shrinks the image -- no resize is performed if the GIF already fits within the rectangle. The option may shrink or grow the image; the output GIF will have width width, height height, or both. Either width or height may be an underscore ‘_’, which leaves that dimension unconstrained.

Like
    and but constrains only one dimension.

Resize to a geometry specification as used in ImageMagick and GraphicsMagick.
    Geometry should match ‘widthxheight[%][!][^][<][>]’, where width and height are integers (or underscores, ‘_’, which leaves that dimension unconstrained). The suffixes mean:
    Treat the dimensions as percentages of the current size.
    Resize to given dimensions ignoring original aspect ratio.
    Resize only if the image is smaller than the specified size.
    Resize only if the image is larger than the specified size.
    Dimensions are treated as minimum rather than maximum values.

Scale the output GIF's width and height by
    Xfactor and Yfactor. If Yfactor is not given, it defaults to Xfactor. Scaling happens after all input frames have been combined and before optimization.

Set the method used to resize images. The ‘sample’ method runs
    very quickly, but when shrinking images, it produces noisy results. The ‘mix’ method is somewhat slower, but produces better-looking results. The default method is currently ‘mix’.

    Details: The resize methods differ most when shrinking images. The ‘sample’ method is a point sampler: each pixel position in the output image maps to exactly one pixel position in the input. When shrinking, full rows and columns from the input are dropped. The other methods use all input pixels, which generally produces better-looking images. The ‘box’ method, a box sampler, is faster than the more complex filters and produces somewhat sharper results, but there will be anomalies when shrinking images by a small amount in one dimension. (Some output pixels will correspond to exactly 1 input row or column, while others will correspond to exactly 2 input rows or columns.) The ‘mix’ method is a full bilinear interpolator. This is slower and produces somewhat blurrier results, but avoids anomalies.

    Gifsicle also supports more complex resamplers, including Catmull-Rom cubic resampling (‘catrom’), the Mitchell-Netravali filter (‘mitchell’), a 2-lobed Lanczos filter (‘lanczos2’), and a 3-lobed Lanczos filter (‘lanczos3’). These filters are slower still, but can give sharper, better results.

Allow Gifsicle to add intermediate colors when resizing images.
    Normally, Gifsicle's resize algorithms use input images' color palettes without changes. When shrinking images with very few colors (e.g., pure black-and-white images), adding intermediate colors can improve the results. Example: allows Gifsicle to add intermediate colors for images that have fewer than 64 input colors.

  Color Options
Color options apply to entire GIFs as they are read or written. They can be turned off with

Reduce the number of distinct colors in each output GIF to
    num or less. Num must be between 2 and 256. This can be used to shrink output GIFs or eliminate any local color tables.

    Normally, an adaptive group of colors is chosen from the existing color table. You can affect this process with the option or by giving your own colormap with Gifsicle may need to add an additional color (making num+1 in all) if there is transparency in the image.

Determine how a smaller colormap is chosen.
    ‘diversity’, the default, is xv(1)'s diversity algorithm, which uses a strict subset of the existing colors and generally produces good results. ‘blend-diversity’ is a modification of this: some color values are blended from groups of existing colors. ‘median-cut’ is the median cut algorithm described by Heckbert. is a synonym for

When
    is on and the colormap is changed, combinations of colors are used to approximate missing colors. This looks better, but makes bigger files and can cause animation artifacts, so it is off by default.

    Specify a dithering method with the optional method argument. The default method, ‘floyd-steinberg’, uses Floyd-Steinberg error diffusion. This usually looks best, but can cause animation artifacts, because dithering choices will vary from frame to frame. The ‘atkinson’ method uses Atkinson error diffusion, which is a variant of Floyd-Steinberg. It offers a more localized dithering pattern, which can be useful for images with large areas of solid color. Gifsicle also supports ordered dithering methods that avoid animation artifacts. The ‘ro64’ method uses a large, random-looking pattern and generally produces good results. The ‘o3’, ‘o4’, and ‘o8’ methods use smaller, more regular patterns. The ‘ordered’ method chooses a good ordered dithering algorithm. For special effects, try the halftone methods ‘halftone’, ‘squarehalftone’, and ‘diagonal’.

    Some methods take optional parameters using commas. The halftone methods take a cell size and a color limit: ‘halftone,10,3’ creates 10-pixel wide halftone cells where each cell uses up to 3 colors.

Set the color space/gamma correction to
    gamma, which can be a real number, ‘srgb’ (the default), or ‘oklab’. Roughly speaking, higher numbers exaggerate shadows and lower numbers exaggerate highlights. The default color space is standard sRGB, which usually works well. (Its effects are similar to --gamma=2.2.) Gifsicle uses gamma correction when choosing a color palette (--colors), when dithering (--dither), and when computing color errors during lossy compression (--lossy).

Alter image colors to shrink output file size at the cost of artifacts
    and noise. Lossiness determines how many artifacts are allowed; higher values can result in smaller file sizes, but cause more artifacts. The default lossiness is 20.

    Gifsicle uses the color space set by --gamma to evaluate artifacts. If unsatisfied with the operation of --lossy, try another color space, such as --gamma=1.

Change
    color1 to color2 in the following input GIFs. (The color arguments have the same forms as in the option.) Change multiple colors by giving the option multiple times. Color changes don't interfere with one another, so you can safely swap two colors with They all take effect as an input GIF is read. cancels all color changes.

Command
    should be a shell command that reads from standard input and writes to standard output. Each colormap in the output GIF is translated into text colormap format (see below) and piped to the command. The output that command generates (which should also be in text colormap format) will replace the input colormap. The replacement doesn't consider color matching, so pixels that used color slot n in the input will still use color slot n in the output.

Change the image to use
    colormap. Each pixel in the image is changed to the closest match in colormap (or, if is on, to a dithered combination of colors in colormap). Colormap can be web for the 216-color “Web-safe palette”; gray for grayscale; bw for black-and-white; or the name of a file. That file should either be a text file (the format is described below) or a GIF file, whose global colormap will be used. If is also given, an N-sized subset of colormap will be used.

    Text colormap files use this format: ; each non-comment line represents one color, "red green blue" ; each component should be between 0 and 255 0 0 0 ; like this 255 255 255 ; or use web hex notation #ffffff ; like this

Same as
    but the output GIF will use colormap as is, rather than reordering it and dropping unused colors.

EXAMPLES
First, let's create an animation, ‘anim.gif’: gifsicle a.gif b.gif c.gif d.gif > anim.gif This animation will move very quickly: since we didn't specify a delay, a browser will cycle through the frames as fast as it can. Let's slow it down and pause .5 seconds between frames, using the option. gifsicle --delay 50 a.gif b.gif c.gif d.gif > anim.gif If we also want the GIF to loop three times, we can use gifsicle -d 50 --loop=3 a.gif b.gif c.gif d.gif > anim.gif (Rather than type again, we used its short form, Many options have short forms; you can see them by running ‘gifsicle --help’. We also abbreviated to which is OK since no other option starts with ‘loop’.)

To explode ‘anim.gif’ into its component frames: gifsicle --explode anim.gif
ls anim.gif*
anim.gif anim.gif.000 anim.gif.001 anim.gif.002 anim.gif.003 To optimize ‘anim.gif’: gifsicle -b -O2 anim.gif To change the second frame of ‘anim.gif’ to ‘x.gif’: gifsicle -b --unoptimize -O2 anim.gif --replace "#1" x.gif is used since ‘anim.gif’ was optimized in the last step. Editing individual frames in optimized GIFs is dangerous without frames following the changed frame could be corrupted by the change. Of course, this might be what you want.

Note that and can be on simultaneously. affects input GIF files, while affects output GIF files.

To print information about the first and fourth frames of ‘anim.gif’: gifsicle -I "#0" "#3" < anim.gif To make black the transparent color in all the GIFs in the current directory, and also print information about each: gifsicle -bII --trans "#000000" *.gif Giving twice forces normal output to occur. With only one the GIFs would not be modified.

To change ‘anim.gif’ to use a 64-color subset of the Web-safe palette: gifsicle -b --colors=64 --use-col=web anim.gif To make a dithered black-and-white version of ‘anim.gif’: gifsicle --dither --use-col=bw anim.gif > anim-bw.gif

To overlay one GIF atop another -- producing a one-frame output GIF that looks like the superposition of the two inputs -- use gifsicle twice: gifsicle bottom.gif top.gif | gifsicle -U "#1" > result.gif

BUGS
Some optimized output GIFs may appear incorrectly on some GIF implementations (for example, Java's); see the option.

Please email suggestions, additions, patches and bugs to ekohler@gmail.com.

SEE ALSO
For a tutorial on GIF images and animations, you might try some of the resources listed on-line at webreference.com:
http://www.webreference.com/authoring/graphics/animation.html

AUTHORS
Eddie Kohler <ekohler@gmail.com>
http://www.read.seas.harvard.edu/~kohler/
He wrote it.

Anne Dudfield <annied@frii.com>
http://www.frii.com/~annied/
She named it.

Hans Dinsen-Hansen <dino@danbbs.dk>
http://www.danbbs.dk/~dino/
Adaptive tree method for GIF writing.

Kornel Lesinski
option.

http://www.lcdf.org/gifsicle/
The gifsicle home page.