KCOV(1)

NAME
kcov - Code coverage analysis for compiled programs and Python scripts

SYNOPSIS
kcov [options] out-dir in-file [args-for-executable...]

kcov --merge outdir <path-to-coverage> [path-to-more-coverage...]

DESCRIPTION

This manual page documents briefly the kcov command. kcov is a code coverage tester for ELF binaries, Python scripts and shell scripts. It allows collecting code coverage information from executables without special compiler directives, and continuously produces output from long-running applications. See the GitHub page, https://github.com/SimonKagstrom/kcov, for more documentation.

OPTIONS

-p, --pid=PID
    Trace PID instead of executing executable (passing the executable is optional for this case). Under this mode, coverage collection for shared libraries will not work.

-l, --limits=low,high
    Setup limits for low/high coverage (default: 25,75).

--include-path=P1[,P2...]
    Comma-separated list of paths to include in the report.

--exclude-path=P1[,P2...]
    Comma-separated list of paths to exclude from the report.

--include-pattern=P1[,P2...]
    Comma-separated list of path patterns to include in the report.

--exclude-pattern=P1[,P2...]
    Comma-separated list of path patterns to exclude from the report.

--exclude-line=P1[,P2...]
    Comma-separated list of line patterns to exclude (mark as non-code)

--exclude-region=START:END[,START1:END1...]
    Comma-separated list of regions of lines patterns to exclude (mark as non-code). The region begins with START and ends with END.

--clean
    Don't accumulate data from multiple runs.

--collect-only
    Only collect coverage data, don't produce HTML/Cobertura output.

--dump-summary
    Dump a brief coverage summary on stdout after execution

--report-only
    Only report HTML/Cobertura output, don't collect data.

--merge
    Merge the result of multiple kcov runs. Instead of a program to test, the output paths from previous runs should be given on the command line, or through a wildcard (*)

--coveralls-id=id
    Upload data to coveralls.io using secret repo_token or Travis CI service job ID id. The ID is taken as a repo_token if it's longer or equal to 32 characters.

--strip-path=path
    If not set, max common path will be stripped away.

UNCOMMON OPTIONS

--path-strip-level=N
    Number of path levels to show for common paths (default: 2).

--skip-solibs
    Skip coverage collection for shared libraries (improves performance)

--verify
    Verify that breakpoints are setup on instruction boundaries. This will slow down execution greatly, but can catch problems where the compiler generates bad DWARF data.

--exit-first-process
    exit when the first process exits, i.e., honor the behavior of daemons. The default behavior is to return to the console when the last process exits.

--cobertura-only
    Generate only cobertura output, as cov.xml, in the output directory. The intended usage is for e.g., vscode coverage gutters, where the output directory can then be pointed to somewhere in the project directory to get coverage with little droppings.

--python-parser=PARSER
    Set the python parser to use for Python programs (the default is python). Can be used to run with Python 3 on systems where Python 2 is the default.

--bash-parser=PARSER
    Set the bash parser to use for shell scripts (the default is /bin/bash).

--bash-method=METHOD
    Use collection method METHOD for bash scripts. The method can be either PS4, for use of the PS4 environment variable, or DEBUG for use of the DEBUG trap.

--bash-handle-sh-invocation
    Handle invocations of /bin/sh scripts via using a LD_PRELOADed library that replaces execve (i.e., /bin/sh is executed as /bin/bash). Does not work well on some systems, so the default is not to use this.

--bash-dont-parse-binary-dir
    Kcov parses the directory of the binary for other scripts and add these to the report. If you don't want this behavior, this option turns that off.

--bash-parse-files-in-dir=P1[,P2...]
    Parse directories for bash scripts.

--bash-tracefd-closeexec
    Force children to not be traced by configuring the trace fd as non-cloneable with LD_PRELOAD. Buggy on some systems.

--replace-src-path=P1:P2
    Replace source file path P1 with P2, if found.

--system-record
    Perform full-system instrumentation on a sysroot, outputting patched binaries which collect coverage data. See doc/full-system-instrumentation.md for more information on full-system instrumentation.

--system-report
    Produce coverage output for a full-system coverage run.

--debug=level
    Set the debug level, 0...31 (as a mask). Default is 0 for no debug output.

--output-interval=MS
    Set the output writing interval in milliseconds. The default is 5000.

--configure=KEY=VAL
    Configure key/value pairs of internal options. See --help --uncommon-options for possible configuration options.

--patchelf=CMD
    For system mode, set the patchelf command (default patchelf).

EXAMPLES

Check coverage for ./frodo and generate HTML output in /tmp/kcov and cobertura output in /tmp/kcov/frodo/cobertura.xml

    kcov /tmp/kcov ./frodo

Check coverage for ./frodo but only include source files names with the string src/frodo

    kcov --include-pattern=src/frodo /tmp/kcov ./frodo

Same as above but split collecting and reporting (perhaps on two different computers)

    kcov --collect-only /tmp/kcov ./frodo

    kcov --report-only --include-pattern=src/frodo /tmp/kcov ./frodo

HTML OUTPUT

The HTML output shows executed and non-executed lines of the source code. Some lines can map to multiple instrumentation points, for example for inlined functions (where every inlining of them will generate a separate instrumentation point). This is shown in the left column as 1/3 for example, which means that one of the three instrumentation points has been executed.

A special output link is [merged], which shows the union of all covered programs. This can be useful for example when you have unit tests in multiple binaries which share a subset of source files.

COBERTURA OUTPUT

Kcov also outputs data in the Cobertura XML format, which allows integrating kcov output in Jenkins (see https://cobertura.github.io/cobertura/ and https://www.jenkins.io/).

The Cobertura output is placed in a file named out-path/exec-filename/cobertura.xml.

JSON OUTPUT

Kcov generates a very generic json file which includes the overall percent covered for a single command and the count of lines instrumented and covered. It also includes a summary of each source file with a percentage and line counts. This allows easy integration with GitlabCI (see https://docs.gitlab.com/ce/user/project/pipelines/settings.html).

The JSON output is placed in a file named out-path/exec-filename/coverage.json.

AUTHOR

Kcov was written by Simon Kagstrom, building upon bcov by Thomas Neumann.

This manual page was written by Michael Tautschnig <mt@debian.org>, for the Debian project (but may be used by others).