This is cfengine-Anomalies.info, produced by makeinfo version 4.2 from
cfengine-Anomalies.texinfo.

INFO-DIR-SECTION System Utilities
START-INFO-DIR-ENTRY
* cfengine Anomalies: (cfengine-Anomalies.info).
                        Cfengine is a language based tool specifically
                        designed for configuring and maintaining BSD
                        and System-5-like operating systems attached
                        to a TCP/IP network.
END-INFO-DIR-ENTRY


File: cfengine-Anomalies.info,  Node: Top,  Next: Overview,  Prev: (dir),  Up: (dir)

Cfengine-Anomalies
******************

   Copyright (C) 2001 Mark Burgess

   Permission is granted to make and distribute verbatim copies of this
manual provided the copyright notice and this permission notice are
preserved on all copies.

   Permission is granted to copy and distribute modified versions of
this manual under the conditions for verbatim copying, provided also
that the section entitled "GNU General Public License" is included
exactly as in the original, and provided that the entire resulting
derived work is distributed under the terms of a permission notice
identical to this one.

   Permission is granted to copy and distribute translations of this
manual into another language, under the above conditions for modified
versions, except that the section entitled "GNU General Public License"
may be included in a translation approved by the author instead of in
the original English.

   Edition 2.1.16 for version 2.1.16 as last updated 6 August 2005.

* Menu:

* Overview::
* Anomaly response::
* Variable Index::
* Concept Index::
* FAQ Index::


File: cfengine-Anomalies.info,  Node: Overview,  Next: Anomaly response,  Prev: Top,  Up: Top

Overview
********

   One of the aims of cfengine version 2, in combination with our
research efforts at Oslo University College, is to develop a real
computer immune system, based on the detection of `sicknesses' or
anomalies in the behaviour of the system, not merely based on a policy
template. Such a system would be far more dynamical and be able to
change in response to changing external conditions. This work is in its
early stages, but you can take advantage of it straight away, with a
minimum of effort. This additional manual aims at getting you started,
so that you can monitor systems, and learn about their behaviour,
without having to watch control panels, or time-series traces.

* Menu:

* Intrusion detection::
* Cryptographic checksums::
* cfenvd::
* Anomaly research::
* cfenvgraph::
* Fluctuation profiles::
* Starting with anomaly detection::


File: cfengine-Anomalies.info,  Node: Intrusion detection,  Next: Cryptographic checksums,  Prev: Overview,  Up: Overview

Intrusion detection
===================

   What is an intrusion or an attempted intrusion? This can be
difficult to define. If someone tries to login at root once? If someone
tries to login at root fifty times? Port scanning, SATAN or ISS scan?
Someone trying a known security hole?

   The aim of an intrusion detection system is to detect break-ins in
progress so that something can be done about them. Obviously the first
thing one should worry about is how difficult it is to break in in the
first place. If we have done the job of securing data well enough, why
are we worried that anyone will be able to get in?

   Intrusion detection is a form of fault-diagnosis. Faults (in a
security system) are not supposed to happen, but the fact is that they
do happen. As with all fault diagnosis systems, IDS give the wrong
answers from time to time. Because it is so difficult to define what
intrusion actually means in a generic sense (it's political) intrusion
detection systems tend to err on the side of caution and report many
false positives, i.e. false alarms.

   This is a very difficult problem to do in real time. What does
real-time mean? Some attacks are stealthy and occur over many hours or
days. How can we make a prompt notification about such attempts? The
intrusion detection will have to be fast to detect quick break-ins, but
have a long memory in order to see slow ones (like the thief digging a
tunnel into the bank with a tea-spoon).

   How will we be alerted or notified about intrusions? By alarm on the
screen? By E-mail or pager alert? What if the attacker first knocks out
E-mail or the pager link?

   User privacy is also a problem. If an intrusion detection system
examines everything going on within the system, looking for suspicious
behaviour, is that an intrusion of privacy? What if humans never see the
data, but only the warnings? Where do we draw the line between justified
and unjustified surveillance? Law enforcement agencies have been arguing
about that one for years!


File: cfengine-Anomalies.info,  Node: Cryptographic checksums,  Next: cfenvd,  Prev: Intrusion detection,  Up: Overview

Cryptographic checksums
=======================

   Change detection is about monitoring whether files and other aspects
of a system change. The idea was originally advanced in the program
Tripwire, which collected a "snaphot" of the system in the form of a
database of file checksums (hashes) and permissions and rechecked the
system against this database at regular intervals. Tripwire examines
only files, and looks for any change at all. If a legitimate change is
made to the system, it responds to  this as a potential threat.
Databases must then be altered, or rebuilt.

   Cfengine adopted part of Tripwire's idea. It collects MD5 hash data
for specified files. Its model for checking permissions is somewhat
different however. Cfengine expects systems to change dynamically, so
it allows users to define a policy for allowed change. It can also
check for processes, not merely files. Integrity checks on files whose
contents are supposed to be static are a good way to detect tampering
with the system, from whatever source. Running MD5 or SHA1 checksums of
files regularly provides us with a way of determining even the smallest
changes to file contents. Here is an excerpt from a cfengine
configuration program that would check the /usr/local filesystem for
file changes. Note that it excludes files such as log files that are
supposed to change:

     control:
     
     actionsequence = ( files )
     
     #####################################################################
     
     files:
     
       /usr/local o=root,bin,man action=warnall mode=o-w r=inf checksum=md5
                          ignore=logs exclude=*.log

* Menu:

* cfenvd::
* Anomaly research::
* cfenvgraph::
* Fluctuation profiles::
* Starting with anomaly detection::


File: cfengine-Anomalies.info,  Node: cfenvd,  Next: Anomaly research,  Prev: Cryptographic checksums,  Up: Overview

An environment detector: cfenvd
===============================

   The `cfenvd' program serves two purposes: as an anomaly detection
engine and as a source of `entropy' for generating random numbers, such
as for encryption keys. Although it is not a compulsory part of
cfengine, it is highly recommended to run this daemon. It requires few
resources and poses no vulnerability to the system. It will play an
increasingly important role in future developments.

   In cfengine 2.x, additional classes are automatically evaluated
based on the state of the host, in relation to earlier times.  This is
accomplished by the additional `cfenvd' daemon, which continually
updates a database of system averages and variances, which characterize
"normal" behaviour. The state of the system is examined and compared to
the database, and the state is classified in terms of the current level
of activity, as compared to an average of equivalent earlier times. e.g.

     RootProcs_low_dev2
     netbiosssn_in_low_dev2
     smtp_out_high_anomalous
     www_in_high_dev3
     ftp_in_high_microanomaly

   The first of these tells us that the number of root processes is two
standard deviations below the average of past behaviour, which might be
fortuitous, or might signify a problem, such as a crashed server.  The
WWW item tells us that the number of incoming connections is three
standard deviations above average. The smtp item tells us that outgoing
smtp connections are more than three standard deviations above average,
perhaps signifying a mail flood.  The setting of these classes is
transparent to the user, but the additional information is only visible
to the privileged owner of the cfengine work-directory, where the data
are cached.

   The term `microanomaly' is used to describe two standard deviations
above normal, when the delta of the change is less than the arbitray
value of 5. This is a small number, and anomalies of these kinds are
generally noise.

   Simply specifying statistical number anomalies is not sufficient to
provide well-honed anomaly characteristics. Cfengine tries to organize
the information surrounding an anomaly first in terms of statistical
significance and then only later in terms of event characteristics.
There are too many events in which the numerical values exceed
thresholds determined by an arbitrary policy. Other criteria are needed
to pin down which anomalies are interesting and which are not. As a
second level of policy filtering, cfengine provides a measure of the
entropy of the source IP addresses of the  measured data. A low entropy
value means that most of the events came from only a few (or one) IP
addresses. A high entropy value implies that the events were spread
over many IP sources. These conditions are described by classes of the
form:

      entropy_www_in_high
      entropy_smtp_in_low

   Thus, for example, in the first case the class will be set if
incoming traffic at the peak event of the last data sample was spread
evenly over all the incoming addresses. Such an event indicates that
the resource usage is not due to a single source (e.g. an attacker from
a single location) but is evenly spread -- perhaps just a coincidental
anomaly. In the second case, the low entropy smtp traffic must come
from one or two addresses and is more likely to be spam or an attack of
some kind.  These classes can be combined with the specific anomaly
thresholds (see example below).

   Active incoming ports are also registered as "pin-portnumber", but
this is mainly an experimental feature for future research. The
resulting class list, obtained from exploring the environment of the
system, and after parsing a configuration, looks something like this:

     host% cfagent -p -v
     
     [snip]
     
     Defined Classes = ( any Thursday Hr14 Min24 Min20_25
     Day19 July Yr2001 solaris examplehost 32_bit sunos_5_7
     sunos_sun4u sunos_sun4u_5_7 sparc solaris2_7 129_0_0
     129_0_0_10 loghost OnTheHour peaktime DayTime
     examplehost_example_org longjob Setup_SSH_OK y MailHub
     percent_60 RootProcs_normal_dev2 nfsd_out_low_dev2
     pin-1554 pin-80 pin-21 pin-6011 pin-5308 pin-139
     pin-983 pin-10 )
     
     [snip]
   It is not yet known how the extra environment classes will be used in
practice.  One obvious possibility is to limit certain heavy-weight
operations (such as file tree scans) when the host is very busy, and to
increase the probability of their occurrence when the host is lightly
loaded. See the example in section 11.  It remains to be seen how users
will respond to these possibilities.

* Menu:

* Anomaly research::
* cfenvgraph::
* Starting with anomaly detection::


File: cfengine-Anomalies.info,  Node: Anomaly research,  Next: cfenvgraph,  Prev: cfenvd,  Up: Overview

Anomaly research
================

   There is no system available in the world today which can claim to
detect and classify the functioning state of a computer system.
Cfengine does not attempt to provide a "product" solution to this
problem; rather it incorporates a framework, based on the current state
of knowledge, for continuing research into this issue.  In version 2.x
of cfengine, an extra daemon `cfenvd' is used to collect statistical
data about the recent history of each host (approximately the past two
months), and classify it in a way that can be utilized by the cfengine
agent.

   The daemon may simply be started, with no arguments:
     cfenvd
   and it proceeds to collect data and work autonomously, without
further supervision. The cf-environment daemon is meant be trivial to
use. The current long-term data recorded by the daemon are: number of
users, number of root processes, number of non-root processes,
percentage disk full for root disk, number of incoming and outgoing
sockets for netbiosns, netbiosdgm, netbiosssn, irc, cfengine, nfsd,
smtp, www, ftp, ssh and telnet. These data have been studied
previously, and their behaviour is relatively well understood. In
future versions, it is expected to extend this repertoire, as more
research is done.

   The use of the daemon will not be reliable until about six to eight
weeks after installing and running it, since a suitable training period
is required to build up enough data for stable characterization. The
daemon automatically adapts to the changing conditions, but has a
built-in inertia which prevents anomalous signals from being given too
much credence.  Persistent changes will gradually change the `normal
state' of the host over an interval of a few weeks. Unlike some
systems, cfengine's training period never ends.  It regards normal
behaviour as a relative concept, which has more to do with local
stability than global constancy.

   The final size of the database is approximately 2MB. Measurements are
taken every five minutes (approximately). This interval is based on
auto-correlation times measured for networked hosts in practice.

   Cfenvd sets a number of classes in cfengine which describe the
current state of the host in relation to its recent history. The classes
describe whether a parameter is above or below its average value, and
how far from the average the current value is, in units of the
standard-deviation (see above). This information could be utilized to
arrange for particularly resource-intensive maintenance to be delayed
until the expected activity was low.


File: cfengine-Anomalies.info,  Node: cfenvgraph,  Next: Fluctuation profiles,  Prev: Anomaly research,  Up: Overview

cfenvgraph
==========

   The `cfenvgraph' command can use used to dump a graph of averages for
visual inspection of the normal state database. The format of the file
is
     t,y_1,y_2,y_3...

which can be viewed using `gnuplot' or `xgmr' or other graphical
plotting program.  This would allow the policy-maker to see what is
likely to be a good time for such work (say 06:00 hours), and then use
this time for the job, unless an anomalous load is detected.

   The cfenvgraph command is used to extract data from the database
used by the cfenvd environment daemon.
     cfenvgraph -f FILENAME.DB [-r -T -t -s -e]
   The command normally generates two files with format
     t, y_1, y_2, y_3, y_4...
   in a sub-directory of the current directory `cfenvgraphs-snapshot'
(or `cfenvgraphs-'TIMESTAMP if `-T' is used).

   The files are called
     cfenv-average
     cfenv-stddev
   and contain, respectively, the weighted average values of all the
recorded data and the square-root of the weighted variances with respect
to the averages. Data are weighted in such a way that older values are
gradually deprecated, becoming irrelevant after about two months.

   Normally the vertical scale of each graph is scaled so that each line
has a maximum value of 1 and a minimum value of 0, this allows all the
lines to be seen in maximum detail. However, this makes it difficult to
see the absolute values of the lines. With the `-n' option, no scaling
is performed and true values are plotted.

   The complete data span a one-week period, and the daily rhythm of
the system may normally be viewed as a number of peaks, one per day.

   The options are:
`--help (-h)'
     List command options

`--file (-f)'
     Specifiy file to plot.

`--titles (-t)'
     If the `-t' option is given, comments are generated at the start
     of the file which describe the columns. These are in a format
     understood by  `vvgraph' as title/label data.

`--timestamps (-T)'
     If the `-T' option is given, the output filenames are time-stamped
     with the current time, in order to give a unique name.

`--resolution (-r)'
     If the `-r' option is given then high resolution data are generated
     (five minute resolution), otherwise data are averaged over periods
     of one hour to generate simpler and smoother graphs.

`--separate (-s)'
     If the `-s' option is given, cfenvgraph generates separate files
     for each metric, in the format
          t,y,dy
     where dy is the height of a vertical error-bar. This set of graphs
     combines the average with the standard-deviation. (Note that the
     error bars show the standard-deviation, and not the standard error
     of the mean i.e. stddev/sqrt(N)); the latter has no obvious
     meaning here.  If `-e' is specified, then error bars are omitted.

`--no-error-bars (-e)'
     No error bars are plotted.

`--no-scaling (-n)'
     The graphs are not scaled, so that (min,max) is mapped onto the
     interval (0,1).

   Note that the values printed for sockets always look higher than
they should for highly active services. This is because even those
sockets which are in CLOSE_WAIT are counted. This is the correct way to
determine a normal state based on the recent past. It is a local
averaging performed by the kernel. If one counts only those connections
which are currently active, one gets a distorted view of activity with
a 5-minute sample rate. To measure more often than this would place
unacceptably high load on the system.

   Graphs may be viewed in `vvgraph', `xmgr' (used in the pictures
above) or `gnuplot', or other graphical viewer. These graphs are not
meant for continuous viewing. The data are averages, not time-series.

   For example, with gnuplot

     host$ cfenvgraph -s
     host$ gnuplot
     gnuplot> plot "www-in.cfenv" with errorbars
     gnuplot> plot "www-in.cfenv" with lines

   The new version of `xmgr' is called `xmgrace'. It can be invoked as
follows:

     host$ xmgrace -nxy cfenv-averages
     host$ xmgrace  rootprocs.cfenv
     host$ xmgrace -settype xydy  rootprocs.cfenv
     host$ xmgrace -settype xydy  rootprocs.cfenv -hardcopy -hdevice JPEG

   If you see the error "Strings are not allowed", it might be because
some "nan" values have come into the text file.


File: cfengine-Anomalies.info,  Node: Fluctuation profiles,  Next: Starting with anomaly detection,  Prev: cfenvgraph,  Up: Overview

Fluctuation profiles
====================

   Any model of fluctuating values is based on the idea that the
changing signal has a basic separation of signal and noise. The
variability of the signal is generally characterized by a probability
distribution. Some tools and many papers assume that the distribution
of fluctuations is Gaussian. This is almost never the case in real
computer systems.

   Hurst exponent measures the degree of stability in the signal, in
the following sense....


File: cfengine-Anomalies.info,  Node: Starting with anomaly detection,  Prev: Fluctuation profiles,  Up: Overview

Starting with anomaly detection
===============================

   Try importing the following file:


     ###
     #
     # BEGIN cf.environ
     #
     ###
     
     #
     # Just a test for responses to measured anomalies
     #
     
     classes:
     
      anomaly_hosts = ( myhost1 myhost2 )
     
     
     #################################################
     
     alerts:
     
       nfsd_in_high_dev2::
     
       "High NFS server access rate 2dev at $(host)/$(env_time)
     current value $(value_nfsd_in) av $(average_nfsd_in) pm
     $(stddev_nfsd_in)"
     
       ShowState(incoming.nfs)
     
     
      # ROOT PROCS
     
       anomaly_hosts.RootProcs_high_dev2::
     
        "RootProc anomaly high 2 dev on $(host)/$(env_time) current value
     $(value_rootprocs) av $(average_rootprocs) pm $(stddev_rootprocs)"
       ShowState(procs)
     
     
     
      # USER PROCS
     
      anomaly_hosts.UserProcs_high_dev2::
     
        "UserProc anomaly high 2 dev on $(host)/$(env_time) current
     value $(value_userprocs) av $(average_userprocs) pm $(stddev_userprocs)"
        ShowState(procs)
     
     
      anomaly_hosts.UserProcs_high_anomaly::
     
        "UserProc anomaly high 3 dev!! on $(host)/$(env_time)"
        ShowState(procs)
     
     
      # WWW IN
     
      # This happens too often
      # anomaly_hosts.www_in_high_dev2::
      #
     
      entropy_www_in_high.anomaly_hosts.www_in_high_anomaly::
     
        "HIGH ENTROPY Incoming www anomaly high anomaly dev!!
     on $(host)/$(env_time) - current value $(value_www_in)
     av $(average_www_in) pm $(stddev_www_in)"
     
        ShowState(incoming.www)
     
      entropy_www_in_low.anomaly_hosts.www_in_high_anomaly::
     
        "LOW ENTROPY Incoming www anomaly high anomaly dev!! on
     $(host)/$(env_time) - current value $(value_www_in) av
     $(average_www_in) pm $(stddev_www_in)"
     
        ShowState(incoming.www)
     
     
     
      # SMTP IN
     
      entropy_smtp_in_high.anomaly_hosts.smtp_in_high_dev2::
     
        "HIGH ENTROPY Incoming smtp anomaly high 2 dev on $(host)/$(env_time)"
     
      entropy_smtp_in_high.anomaly_hosts.smtp_in_high_anomaly::
     
        "HIGH ENTROPY Incoming smtp anomaly high anomaly !! on $(host)/$(env_time)"
     
     
      entropy_smtp_in_low.anomaly_hosts.smtp_in_high_dev1::
     
        "LOW ENTROPY Incoming smtp anomaly high 1 dev on $(host)/$(env_time)
      current value $(value_smtp_in) av  $(average_smtp_in) pm $(stddev_smtp_in)"
     
        ShowState(incoming.smtp)
     
     
      entropy_smtp_in_low.anomaly_hosts.smtp_in_high_dev2::
     
        "LOW ENTROPY Incoming smtp anomaly high 2 dev on $(host)/$(env_time)
     current value $(value_smtp_in) av  $(average_smtp_in) pm $(stddev_smtp_in)"
     
        ShowState(incoming.smtp)
     
     
      entropy_smtp_in_low.anomaly_hosts.smtp_in_high_anomaly::
     
        "LOW ENTROPY Incoming smtp anomaly high anomaly !! on $(host)/$(env_time)
     current value $(value_smtp_in) av  $(average_smtp_in) pm $(stddev_smtp_in)"
     
        ShowState(incoming.smtp)
     
     
      # SMTP OUT
     
      anomaly_hosts.smtp_out_high_dev2::
     
        "Outgoing smtp anomaly high 2 dev on $(host)/$(env_time) current value
     $(value_smtp_out) av  $(average_smtp_out) pm $(stddev_smtp_out)"
     
        ShowState(outgoing.smtp)
     
      anomaly_hosts.smtp_out_high_anomaly::
     
        "Outgoing smtp anomaly high anomaly dev!! on $(host)/$(env_time)
     current value $(value_smtp_out) av $(average_smtp_out) pm $(stddev_smtp_out)"
     
        ShowState(outgoing.smtp)
     
     
      # SAMBA
     
      anomaly_hosts.netbiosssn_in_high_dev2::
     
        "SAMBA access high 2 on $(host)/$(env_time) current value
     $(value_netbiosssn_in) av $(average_netbiosssn_in) pm $(stddev_netbiosssn_in)"
     
        ShowState(incoming.netbiosssn)
     
     ###########################################################################
     
     ###
     #
     # END cf.environ
     #
     ###

   The output generated by this file shows the current value of the
quantity and a summary of the highest values during the last 40 minutes:


     cf:cube: LOW ENTROPY Incoming www anomaly high anomaly dev!! on cube/Fri Feb 20 19:57:23 2004 - current value 53 av 9.9 pm 16.1
     cf:cube: -----------------------------------------------------------------------------------
     cf:cube: In the last 40 minutes, the peak state was:
     cf:cube: ( 1) tcp        0      0 128.39.74.16:80         157.158.24.40:4049      TIME_WAIT
     cf:cube: ( 2) tcp        0      0 128.39.74.16:80         157.158.24.40:3796      TIME_WAIT
     cf:cube: ( 3) tcp        0      0 128.39.74.16:80         157.158.24.40:3544      TIME_WAIT
     cf:cube: ( 4) tcp        0      0 128.39.74.16:80         157.158.24.40:4063      TIME_WAIT
     cf:cube: ( 5) tcp        0      0 128.39.74.16:80         157.158.24.40:4035      TIME_WAIT
     cf:cube: ( 6) tcp        0      0 128.39.74.16:80         157.158.24.40:3782      TIME_WAIT
     cf:cube: ( 7) tcp        0      0 128.39.74.16:80         157.158.24.40:3530      TIME_WAIT
     cf:cube: ( 8) tcp        0      0 128.39.74.16:80         157.158.24.40:3824      TIME_WAIT
     cf:cube: ( 9) tcp        0      0 128.39.74.16:80         157.158.24.40:3572      TIME_WAIT
     cf:cube: (10) tcp        0      0 128.39.74.16:80         157.158.24.40:4091      TIME_WAIT
     cf:cube: (11) tcp        0      0 128.39.74.16:80         157.158.24.40:3839      TIME_WAIT
     cf:cube: (12) tcp        0      0 128.39.74.16:80         157.158.24.40:3810      TIME_WAIT
     cf:cube: (13) tcp        0      0 128.39.74.16:80         157.158.24.40:4077      TIME_WAIT
     cf:cube: (14) tcp        0      0 128.39.74.16:80         157.158.24.40:3993      TIME_WAIT
     cf:cube: (15) tcp        0      0 128.39.74.16:80         157.158.24.40:3740      TIME_WAIT
     cf:cube: (16) tcp        0      0 128.39.74.16:80         157.158.24.40:3712      TIME_WAIT
     cf:cube: (17) tcp        0      0 128.39.74.16:80         157.158.24.40:3979      TIME_WAIT
     cf:cube: (18) tcp        0      0 128.39.74.16:80         157.158.24.40:3726      TIME_WAIT
     cf:cube: (19) tcp        0      0 128.39.74.16:80         157.158.24.40:4021      TIME_WAIT
     cf:cube: (20) tcp        0      0 128.39.74.16:80         157.158.24.40:3768      TIME_WAIT
     cf:cube: (21) tcp        0      0 128.39.74.16:80         157.158.24.40:3516      TIME_WAIT
     cf:cube: (22) tcp        0      0 128.39.74.16:80         80.203.17.11:11487      ESTABLISHED
     cf:cube: (23) tcp        0      0 128.39.74.16:80         157.158.24.40:4007      TIME_WAIT
     cf:cube: (24) tcp        0      0 128.39.74.16:80         157.158.24.40:3754      TIME_WAIT
     cf:cube: (25) tcp        0      0 128.39.74.16:80         66.196.72.28:6545       TIME_WAIT
     cf:cube: (26) tcp        0      0 128.39.74.16:80         157.158.24.40:3923      TIME_WAIT
     cf:cube: (27) tcp        0      0 128.39.74.16:80         157.158.24.40:3670      TIME_WAIT
     cf:cube: (28) tcp        0      0 128.39.74.16:80         80.202.77.107:1567      TIME_WAIT
     cf:cube: (29) tcp        0      0 128.39.74.16:80         157.158.24.40:4189      TIME_WAIT
     cf:cube: (30) tcp        0      0 128.39.74.16:80         157.158.24.40:3909      TIME_WAIT
     cf:cube: (31) tcp        0      0 128.39.74.16:80         157.158.24.40:3656      TIME_WAIT
     cf:cube: (32) tcp        0      0 128.39.74.16:80         157.158.24.40:3698      TIME_WAIT
     cf:cube: (33) tcp        0      0 128.39.74.16:80         157.158.24.40:3965      TIME_WAIT
     cf:cube: (34) tcp        0      0 128.39.74.16:80         80.202.77.107:1568      TIME_WAIT
     cf:cube: (35) tcp        0      0 128.39.74.16:80         157.158.24.40:3937      TIME_WAIT
     cf:cube: (36) tcp        0      0 128.39.74.16:80         157.158.24.40:3684      TIME_WAIT
     cf:cube: (37) tcp        0      0 128.39.74.16:80         157.158.24.40:4203      TIME_WAIT
     cf:cube: (38) tcp        0      0 128.39.74.16:80         157.158.24.40:3951      TIME_WAIT
     cf:cube: (39) tcp        0      0 128.39.74.16:80         157.158.24.40:3600      TIME_WAIT
     cf:cube: (40) tcp        0      0 128.39.74.16:80         157.158.24.40:4119      TIME_WAIT
     cf:cube: (41) tcp        0      0 128.39.74.16:80         157.158.24.40:3867      TIME_WAIT
     cf:cube: (42) tcp        0      0 128.39.74.16:80         157.158.24.40:3614      TIME_WAIT
     cf:cube: (43) tcp        0      0 128.39.74.16:80         157.158.24.40:3586      TIME_WAIT
     cf:cube: (44) tcp        0      0 128.39.74.16:80         157.158.24.40:4105      TIME_WAIT
     cf:cube: (45) tcp        0      0 128.39.74.16:80         157.158.24.40:3853      TIME_WAIT
     cf:cube: (46) tcp        0      0 128.39.74.16:80         157.158.24.40:4147      TIME_WAIT
     cf:cube: (47) tcp        0      0 128.39.74.16:80         157.158.24.40:3895      TIME_WAIT
     cf:cube: (48) tcp        0      0 128.39.74.16:80         157.158.24.40:3642      TIME_WAIT
     cf:cube: (49) tcp        0      0 128.39.74.16:80         80.213.238.106:4318     FIN_WAIT2
     cf:cube: (50) tcp        0      0 128.39.74.16:80         80.213.238.106:4319     TIME_WAIT
     cf:cube: (51) tcp        0      0 128.39.74.16:80         157.158.24.40:4133      TIME_WAIT
     cf:cube: (52) tcp        0      0 128.39.74.16:80         157.158.24.40:3881      TIME_WAIT
     cf:cube: (53) tcp        0      0 128.39.74.16:80         157.158.24.40:3628      TIME_WAIT
      {
      DNS key: 157.158.24.40 = arm.iele.polsl.gliwice.pl (47/53)
      DNS key: 80.203.17.11 = 11.80-203-17.nextgentel.com (1/53)
      DNS key: 66.196.72.28 = j3118.inktomisearch.com (1/53)
      DNS key: 80.202.77.107 = 107.80-202-77.nextgentel.com (2/53)
      DNS key: 80.213.238.106 = ti100710a080-3690.bb.online.no (2/53)
      -
      Frequency: 157.158.24.40    |*********************************************** 	(47/53)
      Frequency: 80.203.17.11     |* 	(1/53)
      Frequency: 66.196.72.28     |* 	(1/53)
      Frequency: 80.202.77.107    |** 	(2/53)
      Frequency: 80.213.238.106   |** 	(2/53)
      }
      -
      Scaled entropy of addresses = 12.7 %
      (Entropy = 0 for single source, 100 for flatly distributed source)
      -
     cf:cube: -----------------------------------------------------------------------------------
     cf:cube: State of incoming.www peaked at Fri Feb 20 19:57:23 2004

   Another example of a low entropy smtp (possible distributed spam
operation in progress):


     cf:nexus: HIGH ENTROPY Incoming smtp anomaly high 2 dev on nexus/Sat Aug  6 14:29:58 2005
     cf:nexus: -----------------------------------------------------------------------------------
     cf:nexus: In the last 40 minutes, the peak state was q = 25:
      {
      DNS key: 81.218.96.62 = bzq-218-96-62.red.bezeqint.net (1/25)
      DNS key: 85.152.128.208 = cm-85-152-128-208.telecable.es (1/25)
      DNS key: 82.40.141.102 = 82-40-141-102.cable.ubr04.uddi.blueyonder.co.uk (1/25)
      DNS key: 68.189.49.33 = 68-189-49-33.dhcp.rdng.ca.charter.com (1/25)
      DNS key: 61.47.218.167 = 61.47.218.167 (1/25)
      DNS key: 211.170.184.229 = 211.170.184.229 (2/25)
      DNS key: 64.65.134.186 = static-64-65-134-186.dsl.pdx.eschelon.com (1/25)
      DNS key: 61.9.82.105 = 61.9.82.105.mozcom.net (1/25)
      DNS key: 219.234.19.166 = 219.234.19.166 (1/25)
      DNS key: 68.60.199.206 = pcp07641774pcs.calhun01.ga.comcast.net (1/25)
      DNS key: 82.216.163.149 = ip-149.net-82-216-163.suresnes3.rev.numericable.fr (1/25)
      DNS key: 84.9.43.170 = host-84-9-43-170.bulldogdsl.com (1/25)
      DNS key: 84.59.55.171 = dsl-084-059-055-171.arcor-ip.net (1/25)
      DNS key: 200.104.102.141 = pc-141-102-104-200.cm.vtr.net (1/25)
      DNS key: 85.152.225.126 = cm-85-152-225-126.telecable.es (1/25)
      DNS key: 218.81.136.17 = 218.81.136.17 (1/25)
      DNS key: 83.84.225.251 = 5354E1FB.cable.casema.nl (1/25)
      DNS key: 60.198.145.92 = 60-198-145-92.static.tfn.net.tw (1/25)
      DNS key: 61.53.185.218 = 61.53.185.218 (1/25)
      DNS key: 81.53.86.235 = ANantes-154-1-63-235.w81-53.abo.wanadoo.fr (1/25)
      DNS key: 58.142.251.14 = 58.142.251.14 (1/25)
      DNS key: 220.234.173.3 = 220.234.173.3 (1/25)
      DNS key: 219.251.118.195 = 219.251.118.195 (1/25)
      DNS key: 68.44.158.165 = pcp04364785pcs.glstrt01.nj.comcast.net (1/25)
      -
      Frequency: 211.170.184.229  |**        (2/25)
      Frequency: 68.44.158.165    |*         (1/25)
      Frequency: 219.251.118.195  |*         (1/25)
      Frequency: 220.234.173.3    |*         (1/25)
      Frequency: 58.142.251.14    |*         (1/25)
      Frequency: 81.53.86.235     |*         (1/25)
      Frequency: 61.53.185.218    |*         (1/25)
      Frequency: 60.198.145.92    |*         (1/25)
      Frequency: 83.84.225.251    |*         (1/25)
      Frequency: 218.81.136.17    |*         (1/25)
      Frequency: 85.152.225.126   |*         (1/25)
      Frequency: 200.104.102.141  |*         (1/25)
      Frequency: 84.59.55.171     |*         (1/25)
      Frequency: 84.9.43.170      |*         (1/25)
      Frequency: 82.216.163.149   |*         (1/25)
      Frequency: 68.60.199.206    |*         (1/25)
      Frequency: 219.234.19.166   |*         (1/25)
      Frequency: 61.9.82.105      |*         (1/25)
      Frequency: 64.65.134.186    |*         (1/25)
      Frequency: 61.47.218.167    |*         (1/25)
      Frequency: 68.189.49.33     |*         (1/25)
      Frequency: 82.40.141.102    |*         (1/25)
      Frequency: 85.152.128.208   |*         (1/25)
      Frequency: 81.218.96.62     |*         (1/25)
      }
      -
      Scaled entropy of addresses = 4.0 %
      (Entropy = 0 for single source, 100 for flatly distributed source)
      -
     cf:nexus: -----------------------------------------------------------------------------------
     cf:nexus: State of incoming.smtp peaked at Sat Aug  6 14:29:58 2005
     cf:nexus: HIGH ENTROPY Incoming smtp anomaly high anomaly !! on nexus/Sat Aug  6 14:29:58 2005


File: cfengine-Anomalies.info,  Node: Anomaly response,  Next: Variable Index,  Prev: Overview,  Up: Top

Anomaly response
****************

* Menu:

* Anomaly Classes::
* Entropy::
* Log utilities::
* Persistent alerts::


File: cfengine-Anomalies.info,  Node: Anomaly Classes,  Next: Entropy,  Prev: Anomaly response,  Up: Anomaly response

Anomaly Classes
===============

   When cfengine detects an anomaly, it classified the current
statistical state of the system into a number of classes.

   Cfengine classifies anomalies by whether the currently measured
state of the system is higher or lower than the average for the current
time of week. The amount of deviation is based on an estimate of the
`standard deviation'. The precise definition of the average and standard
deviations is complex, and is discussed in the paper "M. Burgess,
Probabilistic anomaly detection in distributed computer networks",
(submitted to Science of Computer Programming, and available on the
web).

   The list of measured attributes is currently fixed to the following:

   The first part of the string is from the list:

     Users
     RootProcs
     UserProcs
     DiskFree
     LoadAvg
   Socket counts of network services distinguish between incoming and
outgoing sockets (to a service or from a client).
`netbiosns'
     Registers traffic to/from port 137.

`netbiosdgm'
     Registers traffic to/from port 138.

`netbiosssn'
     Registers traffic to/from port 139.

`irc'
     Registers traffic to/from port 194.

`cfengine'
     Registers traffic to/from port 5308.

`nfsd'
     Registers traffic to/from port 2049.

`smtp'
     Registers traffic to/from port 25.

`www'
     Registers traffic to/from port 80.

`ftp'
     Registers traffic to/from port 21.

`ssh'
     Registers traffic to/from port 22.

`wwws'
     Registers traffic to/from port 443.

   If you have tcpdump program installed in a standard location, then
`cfenvd -T' collects data about the network flows to your host.

`icmp'
     Traffic belonging to the ICMP protocol (ping etc).

`dns'
     Traffic to port 53, the Domain Name Service (usually a special
     case of UDP).

`udp'
     Miscellaneous UDP traffic that is not related to DNS.

`tcpsyn'
     Registers TCP packets with SYN flag set.

`tcpack'
     Registers TCP packets with ACK flag set.

`tcpfin'
     Registers TCP packers with FIN flag set.

`misc'
     Registers all other packets, not covered above.

   When it has accurate knowledge of statistics, `cfenvd' classifies
the current state into 3 levels:

`normal'
     means that the current level is less than one standard deviation
     above normal.

`dev1'
     means that the current level is at least one standard deviation
     about the average.

`dev2'
     means that the current level is at least two standard deviations
     about the average.

`anomaly'
     means that the current level is more than 3 standard deviations
     above average.

Each of these charaxterizations assumes that there are good data
available. The `cfenvd' evaluates its data and decides whether or not
the data are too noisy to be really useful.  If the data are too noisy
but the level appears to be more than two standard deviations above
aaverage, then the category `microanomaly' is used.

   Here are some example classes:

     UserProcs_high_dev2
     UserProcs_low_dev1
     www_in_high_anomaly
     smtp_out_high_dev2


File: cfengine-Anomalies.info,  Node: Entropy,  Next: Log utilities,  Prev: Anomaly Classes,  Up: Anomaly response

Entropy
=======

   Entropy is a statistical characterization of the distribution digits
in an arrival process over long times. You can learn more about entropy
in Mark Burgess, Analytical Network and System Administration.

   For network related data, cfengine evaluates the entropy in the
currently measured sample of measurements, with respect to the
different IP addresses of the sources.  You can use these to predicate
the appearance of an anomaly, e.g.
      entropy_www_in_high
      entropy_smtp_in_low

   For example, if you only want to know when a huge amount of SMTP
traffic arrives from a single IP source, you would label your anomaly
response:
     entropy_smtp_in_low.smtp_in_high_anomaly::

since the entropy is low when the majority of traffic comes from only a
small number of IP addresses (e.g. one). The entropy is maximal when
activity comes equally from several different sources.


File: cfengine-Anomalies.info,  Node: Log utilities,  Next: Persistent alerts,  Prev: Entropy,  Up: Anomaly response

Log utilities
=============

   How shall we respond to an anomalous event?  Alerts can be
channelled directly to syslog:

       SysLog(LOG_ERR,"Test syslog message")
   Software that processes logs can thus be interfaced with via the
syslog interface.


File: cfengine-Anomalies.info,  Node: Persistent alerts,  Prev: Log utilities,  Up: Anomaly response

Persistent alerts
=================

   DEFCON 1

   Another application for alerts is to pass signals from one cfengine
to another by persistent, shared memory.  For example, suppose a
short-lived anomaly event triggers a class that relates to a security
alert. The event class might be too short-lived to be followed up by
cfagent in full. One could thus set a long term class that would
trigger up several follow-up checks.  A persistent class could also be
used to exclude an operation for an interval of time.

   Persistent class memory can be added through a system alert
functions to give timer behaviour.  For example, consider setting a
class that acts like a non-resettable timer. It is defined for exactly
10 minutes before expiring.

       SetState("preserved_class",10,Preserve)
   Or to set a class that acts as a resettable timer. It is defined for
60 minutes unless the SetState call is called again to extend its
lifetime.

       SetState(non_preserved_class,60,Reset)
   Existing persistent classes can be deleted with:

               UnsetState(myclass)


File: cfengine-Anomalies.info,  Node: Variable Index,  Next: Concept Index,  Prev: Anomaly response,  Up: Top

Variable Index
**************

* Menu:

File: cfengine-Anomalies.info,  Node: Concept Index,  Next: FAQ Index,  Prev: Variable Index,  Up: Top

Concept Index
*************

* Menu:

* anomaly:                               Anomaly Classes.
* dev1:                                  Anomaly Classes.
* dev2:                                  Anomaly Classes.
* Encryption keys:                       cfenvd.
* Entropy <1>:                           cfenvd.
* Entropy:                               Entropy.
* Entropy source:                        cfenvd.
* Micro-anomaly:                         cfenvd.
* Microanomaly:                          cfenvd.
* microanomaly:                          Anomaly Classes.
* normal:                                Anomaly Classes.
* Random numbers:                        cfenvd.
* xmgrace:                               cfenvgraph.


File: cfengine-Anomalies.info,  Node: FAQ Index,  Prev: Concept Index,  Up: Top

FAQ Index
*********

* Menu:


Tag Table:
Node: Top478
Node: Overview1638
Node: Intrusion detection2602
Node: Cryptographic checksums4743
Node: cfenvd6628
Node: Anomaly research11427
Node: cfenvgraph14122
Node: Fluctuation profiles18514
Node: Starting with anomaly detection19142
Node: Anomaly response33475
Node: Anomaly Classes33700
Node: Entropy36885
Node: Log utilities37911
Node: Persistent alerts38286
Node: Variable Index39468
Node: Concept Index39620
Node: FAQ Index40452

End Tag Table
