# 3 - Common Widgets and Attributes

This chapter describes many of the widgets that are provided with FLTK and covers how to query and set the standard attributes.

## Buttons

FLTK provides many types of buttons:

- `Fl_Button` - A standard push button.
- `Fl_Check_Button` - A button with a check box.
- `Fl_Light_Button` - A push button with a light.
- `Fl_Repeat_Button` - A push button that repeats when held.
- `Fl_Return_Button` - A push button that is activated by the `Enter` key.
- `Fl_Round_Button` - A button with a radio circle.

Figure 3-1: FLTK Button Widgets

All of these buttons just need the corresponding `<FL/Fl_xyz_Button.H>` header file. The constructor takes the bounding box of the button and optionally a label string:

    Fl_Button *button = new Fl_Button(x, y, width, height, "label");
    Fl_Light_Button *lbutton = new Fl_Light_Button(x, y, width, height);
    Fl_Round_Button *rbutton = new Fl_Round_Button(x, y, width, height, "label");

Each button has an associated `type()` which allows it to behave as a push button, toggle button, or radio button:

    button->type(FL_NORMAL_BUTTON);
    lbutton->type(FL_TOGGLE_BUTTON);
    rbutton->type(FL_RADIO_BUTTON);

For toggle and radio buttons, the `value()` method returns the current button state (0 = off, 1 = on). The `set()` and `clear()` methods can be used on toggle buttons to turn a toggle button on or off, respectively. Radio buttons can be turned on with the `setonly()` method; this will also turn off other radio buttons in the same group.

## Text

FLTK provides several text widgets for displaying and receiving text:

- `Fl_Input` - A one-line text input field.
- `Fl_Output` - A one-line text output field.
- `Fl_Multiline_Input` - A multi-line text input field.
- `Fl_Multiline_Output` - A multi-line text output field.
- `Fl_Text_Display` - A multi-line text display widget.
- `Fl_Text_Editor` - A multi-line text editing widget.
- `Fl_Help_View` - A HTML text display widget.

The `Fl_Output` and `Fl_Multiline_Output` widgets allow the user to copy text from the output field but not change it.

The `value()` method is used to get or set the string that is displayed:

    Fl_Input *input = new Fl_Input(x, y, width, height, "label");
    input->value("Now is the time for all good men...");

The string is copied to the widget's own storage when you set the `value()` of the widget.

The `Fl_Text_Display` and `Fl_Text_Editor` widgets use an associated `Fl_Text_Buffer` class for the value, instead of a simple string.

## Valuators

Unlike text widgets, valuators keep track of numbers instead of strings. FLTK provides the following valuators:

- `Fl_Counter` - A widget with arrow buttons that shows the current value.
- `Fl_Dial` - A round knob.
- `Fl_Roller` - An SGI-like dolly widget.
- `Fl_Scrollbar` - A standard scrollbar widget.
- `Fl_Slider` - A scrollbar with a knob.
- `Fl_Value_Slider` - A slider that shows the current value.

Figure 3-2: FLTK valuator widgets

The `value()` method gets and sets the current value of the widget. The `minimum()` and `maximum()` methods set the range of values that are reported by the widget.

## Groups

The `Fl_Group` widget class is used as a general purpose "container" widget. Besides grouping radio buttons, the groups are used to encapsulate windows, tabs, and scrolled windows. The following group classes are available with FLTK:

- `Fl_Double_Window` - A double-buffered window on the screen.
- `Fl_Gl_Window` - An OpenGL window on the screen.
- `Fl_Group` - The base container class; can be used to group any widgets together.
- `Fl_Pack` - A collection of widgets that are packed into the group area.
- `Fl_Scroll` - A scrolled window area.
- `Fl_Tabs` - Displays child widgets as tabs.
- `Fl_Tile` - A tiled window area.
- `Fl_Window` - A window on the screen.

## Setting the Size and Position of Widgets

The size and position of widgets is usually set when you create them. You can access them with the `x()`, `y()`, `w()`, and `h()` methods.

You can change the size and position by using the `position()`, `resize()`, and `size()` methods:

    button->position(x, y);
    group->resize(x, y, width, height);
    window->size(width, height);

If you change a widget's size or position after it is displayed you will have to call `redraw()` on the widget's parent.

## Colors

FLTK stores the colors of widgets as an 32-bit unsigned number that is either an index into a color palette of 256 colors or a 24-bit RGB color. The color palette is not the X or WIN32 colormap, but instead is an internal table with fixed contents.

There are symbols for naming some of the more common colors:

- `FL_BLACK` (this is the default label color)
- `FL_RED`
- `FL_GREEN`
- `FL_YELLOW`
- `FL_BLUE`
- `FL_MAGENTA`
- `FL_CYAN`
- `FL_WHITE`
- `FL_GRAY` (this is the default color of most widgets)

RGB colors can be set using the `fl_rgb_color()` function:

    Fl_Color c = fl_rgb_color(85, 170, 255);

The widget color is set using the `color()` method:

    button->color(FL_RED);

Similarly, the label color is set using the `labelcolor()` method:

    button->labelcolor(FL_WHITE);

## Box Types

The type `Fl_Boxtype` stored and returned in `Fl_Widget::box()` is an enumeration defined in `<Enumerations.H>`. Figure 3-3 shows the standard box types included with FLTK.

Figure 3-3: FLTK box types

`FL_NO_BOX` means nothing is drawn at all, so whatever is already on the screen remains. The `FL_..._FRAME` types only draw their edges, leaving the interior unchanged. The blue color in Figure 3-3 is the area that is not drawn by the frame types.

### Making Your Own Boxtypes

You can define your own boxtypes by making a small function that draws the box and adding it to the table of boxtypes.

Note: This interface has changed in FLTK 2.0!

#### The Drawing Function

The drawing function is passed the bounding box and background color for the widget:

    void xyz_draw(int x, int y, int w, int h, Fl_Color c) {
    ...
    }

A simple drawing function might fill a rectangle with the given color and then draw a black outline:

    void xyz_draw(int x, int y, int w, int h, Fl_Color c) {
      fl_color(c);
      fl_rectf(x, y, w, h);
      fl_color(FL_BLACK);
      fl_rect(x, y, w, h);
    }

#### Adding Your Box Type

The `Fl::set_boxtype()` method adds or replaces the specified box type:

    #define XYZ_BOX FL_FREE_BOXTYPE

    Fl::set_boxtype(XYZ_BOX, xyz_draw, 1, 1, 2, 2);

The last 4 arguments to `Fl::set_boxtype()` are the offsets for the x, y, width, and height values that should be subtracted when drawing the label inside the box.

## Labels and Label Types

The `label()`, `align()`, `labelfont()`, `labelsize()`, `labeltype()`, `image()`, and `deimage()` methods control the labeling of widgets.

### label()

The `label()` method sets the string that is displayed for the label. Symbols can be included with the label string by escaping them using the "@" symbol - "@@" displays a single at sign. Figure 3-4 shows the available symbols.

Figure 3-4: FLTK label symbols

The @ sign may also be followed by the following optional "formatting" characters, in this order:

- '#' forces square scaling, rather than distortion to the widget's shape.
- +[1-9] or -[1-9] tweaks the scaling a little bigger or smaller.
- [1-9] - rotates by a multiple of 45 degrees. '5' and '6' do no rotation while the others point in the direction of that key on a numeric keypad.

Thus, to show a very large arrow pointing downward you would use the label string "@+92->".

### align()

The `align()` method positions the label. The following constants are defined and may be OR'd together as needed:

- `FL_ALIGN_CENTER` - center the label in the widget.
- `FL_ALIGN_TOP` - align the label at the top of the widget.
- `FL_ALIGN_BOTTOM` - align the label at the bottom of the widget.
- `FL_ALIGN_LEFT` - align the label to the left of the widget.
- `FL_ALIGN_RIGHT` - align the label to the right of the widget.
- `FL_ALIGN_INSIDE` - align the label inside the widget.
- `FL_ALIGN_CLIP` - clip the label to the widget's bounding box.
- `FL_ALIGN_WRAP` - wrap the label text as needed.
- `FL_TEXT_OVER_IMAGE` - show the label text over the image.
- `FL_IMAGE_OVER_TEXT` - show the label image over the text (default).

### labeltype()

The `labeltype()` method sets the type of the label. The following standard label types are included:

- `FL_NORMAL_LABEL` - draws the text.
- `FL_NO_LABEL` - does nothing.
- `FL_SHADOW_LABEL` - draws a drop shadow under the text.
- `FL_ENGRAVED_LABEL` - draws edges as though the text is engraved.
- `FL_EMBOSSED_LABEL` - draws edges as thought the text is raised.
- `FL_ICON_LABEL` - draws the icon associated with the text.

### image() and deimage()

The `image()` and `deimage()` methods set an image that will be displayed with the widget. The `deimage()` method sets the image that is shown when the widget is inactive, while the `image()` method sets the image that is shown when the widget is active.

To make an image you use a subclass of `Fl_Image`.

#### Making Your Own Label Types

Label types are actually indexes into a table of functions that draw them. The primary purpose of this is to use this to draw the labels in ways inaccessible through the `fl_font` mechanisim (e.g. `FL_ENGRAVED_LABEL`) or with program-generated letters or symbology.

Note: This interface has changed in FLTK 2.0!

##### Label Type Functions

To setup your own label type you will need to write two functions: one to draw and one to measure the label. The draw function is called with a pointer to a `Fl_Label` structure containing the label information, the bounding box for the label, and the label alignment:

    void xyz_draw(const Fl_Label *label, int x, int y, int w, int h, Fl_Align align) {
    ...
    }

The label should be drawn inside this bounding box, even if `FL_ALIGN_INSIDE` is not enabled. The function is not called if the label value is `NULL`.

The measure function is called with a pointer to a `Fl_Label` structure and references to the width and height:

    void xyz_measure(const Fl_Label *label, int &w, int &h) {
    ...
    }

The function should measure the size of the label and set `w` and `h` to the size it will occupy.

##### Adding Your Label Type

The `Fl::set_labeltype` method creates a label type using your draw and measure functions:

    #define XYZ_LABEL FL_FREE_LABELTYPE

    Fl::set_labeltype(XYZ_LABEL, xyz_draw, xyz_measure);

The label type number `n` can be any integer value starting at the constant `FL_FREE_LABELTYPE`. Once you have added the label type you can use the `labeltype()` method to select your label type.

The `Fl::set_labeltype` method can also be used to overload an existing label type such as `FL_NORMAL_LABEL`.

## Callbacks

Callbacks are functions that are called when the value of a widget changes. A callback function is sent a `Fl_Widget` pointer of the widget that changed and a pointer to data that you provide:

    void xyz_callback(Fl_Widget *w, void *data) {
    ...
    }

The `callback()` method sets the callback function for a widget. You can optionally pass a pointer to some data needed for the callback:

    int xyz_data;

    button->callback(xyz_callback, &xyz_data);

Normally callbacks are performed only when the value of the widget changes. You can change this using the `when()` method:

    button->when(FL_WHEN_NEVER);
    button->when(FL_WHEN_CHANGED);
    button->when(FL_WHEN_RELEASE);
    button->when(FL_WHEN_RELEASE_ALWAYS);
    button->when(FL_WHEN_ENTER_KEY);
    button->when(FL_WHEN_ENTER_KEY_ALWAYS);
    button->when(FL_WHEN_CHANGED | FL_WHEN_NOT_CHANGED);

Hint: Many programmers new to FLTK or C++ try to use a non-static class method instead of a static class method or function for their callback. Since callbacks are done outside a C++ class, the `this` pointer is not initialized for class methods. To work around this problem, define a static method in your class that accepts a pointer to the class, and then have the static method call the class method(s) as needed. The data pointer you provide to the `callback()` method of the widget can be a pointer to the instance of your class.
    class foo {
      void my_callback(Widget *);
      static void my_static_callback(Widget *w, foo *f) { f->my_callback(w); }
      ...
    }

    ...

    w->callback(my_static_callback, this);

## Shortcuts

Shortcuts are key sequences that activate widgets such as buttons or menu items. The `shortcut()` method sets the shortcut for a widget:

    button->shortcut(FL_Enter);
    button->shortcut(FL_SHIFT + 'b');
    button->shortcut(FL_CTRL + 'b');
    button->shortcut(FL_ALT + 'b');
    button->shortcut(FL_CTRL + FL_ALT + 'b');
    button->shortcut(0); // no shortcut

The shortcut value is the key event value - the ASCII value or one of the special keys like `FL_Enter` - combined with any modifiers like `Shift`, `Alt`, and `Control`.