MYSQL(1)

NAME
mysql - the MySQL command-line tool

SYNOPSIS

mysql [options] db_name

DESCRIPTION

mysql is a simple SQL shell (with GNU readline capabilities). It supports interactive and non-interactive use. When used interactively, query results are presented in an ASCII-table format. When used non-interactively (for example, as a filter), the result is presented in tab-separated format. The output format can be changed using command options.

If you have problems due to insufficient memory for large result sets, use the --quick option. This forces mysql to retrieve results from the server a row at a time rather than retrieving the entire result set and buffering it in memory before displaying it. This is done by returning the result set using the mysql_use_result() C API function in the client/server library rather than mysql_store_result().

Using mysql is very easy. Invoke it from the prompt of your command interpreter as follows:

    shell> mysql db_name

Or:

    shell> mysql --user=user_name --password=your_password db_name

Then type an SQL statement, end it with ‘;’, \g, or \G and press Enter.

You can execute SQL statements in a script file (batch file) like this:

    shell> mysql db_name < script.sql > output.tab

MYSQL OPTIONS

mysql supports the following options:

•   --help, -?

    Display a help message and exit.

•   --auto-rehash

    Enable automatic rehashing. This option is on by default, which enables table and column name completion. Use --skip-auto-rehash to disable rehashing. That causes mysql to start faster, but you must issue the rehash command if you want to use table and column name completion.

•   --batch, -B

    Print results using tab as the column separator, with each row on a new line. With this option, mysql does not use the history file.

•   --character-sets-dir=path

    The directory where character sets are installed. See Section 9.1, “The Character Set Used for Data and Sorting”.

•   --column-names

    Write column names in results.

•   --compress, -C

    Compress all information sent between the client and the server if both support compression.

•   --database=db_name, -D db_name

    The database to use. This is useful primarily in an option file.

•   --debug[=debug_options], -# [debug_options]

    Write a debugging log. The debug_options string often is 'd:t:o,file_name'. The default is 'd:t:o,/tmp/mysql.trace'.

•   --debug-info, -T

    Print some debugging information when the program exits.

•   --default-character-set=charset_name

    Use charset_name as the default character set. See Section 9.1, “The Character Set Used for Data and Sorting”.

•   --delimiter=str

    Set the statement delimiter. The default is the semicolon character (‘;’).

•   --execute=statement, -e statement

    Execute the statement and quit. The default output format is like that produced with --batch. See Section 3.1, “Using Options on the Command Line”, for some examples.

•   --force, -f

    Continue even if an SQL error occurs.

•   --host=host_name, -h host_name

    Connect to the MySQL server on the given host.

•   --html, -H

    Produce HTML output.

•   --ignore-spaces, -i

    Ignore spaces after function names. The effect of this is described in the discussion for the IGNORE_SPACE SQL mode (see the section called “SQL MODES”).

•   --line-numbers

    Write line numbers for errors. Disable this with --skip-line-numbers.

•   --local-infile[={0|1}]

    Enable or disable LOCAL capability for LOAD DATA INFILE. With no value, the option enables LOCAL. The option may be given as --local-infile=0 or --local-infile=1 to explicitly disable or enable LOCAL. Enabling LOCAL has no effect if the server does not also support it.

•   --named-commands, -G

    Enable named mysql commands. Long-format commands are allowed, not just short-format commands. For example, quit and \q both are recognized. Use --skip-named-commands to disable named commands. See the section called “MYSQL COMMANDS”.

•   --no-auto-rehash, -A

    Deprecated form of -skip-auto-rehash. See the description for --auto-rehash.

•   --no-beep, -b

    Do not beep when errors occur.

•   --no-named-commands, -g

    Disable named commands. Use the \* form only, or use named commands only at the beginning of a line ending with a semicolon (‘;’). mysql starts with this option enabled by default. However, even with this option, long-format commands still work from the first line. See the section called “MYSQL COMMANDS”.

•   --no-pager

    Deprecated form of --skip-pager. See the --pager option.

•   --no-tee

    Do not copy output to a file. the section called “MYSQL COMMANDS”, discusses tee files further.

•   --one-database, -o

    Ignore statements except those for the default database named on the command line. This is useful for skipping updates to other databases in the binary log.

•   --pager[=command]

    Use the given command for paging query output. If the command is omitted, the default pager is the value of your PAGER environment variable. Valid pagers are less, more, cat [> filename], and so forth. This option works only on Unix. It does not work in batch mode. To disable paging, use --skip-pager. the section called “MYSQL COMMANDS”, discusses output paging further.

•   --password[=password], -p[password]

    The password to use when connecting to the server. If you use the short option form (-p), you cannot have a space between the option and the password. If you omit the password value following the --password or -p option on the command line, you are prompted for one.

    Specifying a password on the command line should be considered insecure. See Section 7.6, “Keeping Your Password Secure”.

•   --port=port_num, -P port_num

    The TCP/IP port number to use for the connection.

•   --prompt=format_str

    Set the prompt to the specified format. The default is mysql>. The special sequences that the prompt can contain are described in the section called “MYSQL COMMANDS”.

•   --protocol={TCP|SOCKET|PIPE|MEMORY}

    The connection protocol to use.

•   --quick, -q

    Do not cache each query result, print each row as it is received. This may slow down the server if the output is suspended. With this option, mysql does not use the history file.

•   --raw, -r

    Write column values without escape conversion. Often used with the --batch option.

•   --reconnect

    If the connection to the server is lost, automatically try to reconnect. A single reconnect attempt is made each time the connection is lost. To suppress reconnection behavior, use --skip-reconnect.

•   --safe-updates, --i-am-a-dummy, -U

    Allow only those UPDATE and DELETE statements that specify which rows to modify by using key values. If you have set this option in an option file, you can override it by using --safe-updates on the command line. See the section called “MYSQL TIPS”, for more information about this option.

•   --secure-auth

    Do not send passwords to the server in old (pre-4.1.1) format. This prevents connections except for servers that use the newer password format.

•   --show-warnings

    Cause warnings to be shown after each statement if there are any. This option applies to interactive and batch mode. This option was added in MySQL 5.0.6.

•   --sigint-ignore

    Ignore SIGINT signals (typically the result of typing Control-C).

•   --silent, -s

    Silent mode. Produce less output. This option can be given multiple times to produce less and less output.

•   --skip-column-names, -N

    Do not write column names in results.

•   --skip-line-numbers, -L

    Do not write line numbers for errors. Useful when you want to compare result files that include error messages.

•   --socket=path, -S path

    For connections to localhost, the Unix socket file to use, or, on Windows, the name of the named pipe to use.

•   --ssl*

    Options that begin with --ssl specify whether to connect to the server via SSL and indicate where to find SSL keys and certificates. See Section 7.7.3, “SSL Command Options”.

•   --table, -t

    Display output in table format. This is the default for interactive use, but can be used to produce table output in batch mode.

•   --tee=file_name

    Append a copy of output to the given file. This option does not work in batch mode. in the section called “MYSQL COMMANDS”, discusses tee files further.

•   --unbuffered, -n

    Flush the buffer after each query.

•   --user=user_name, -u user_name

    The MySQL username to use when connecting to the server.

•   --verbose, -v

    Verbose mode. Produce more output about what the program does. This option can be given multiple times to produce more and more output. (For example, -v -v -v produces table output format even in batch mode.)

•   --version, -V

    Display version information and exit.

•   --vertical, -E

    Print query output rows vertically (one line per column value). Without this option, you can specify vertical output for individual statements by terminating them with \G.

•   --wait, -w

    If the connection cannot be established, wait and retry instead of aborting.

•   --xml, -X

    Produce XML output.

    Note: Prior to MySQL 5.0.26, there was no differentiation in the output when using this option between columns containing the NULL value and columns containing the string literal 'NULL'; both were represented as

    <field name="column_name">NULL</field>
Beginning with MySQL 5.0.26, the output when --xml is used with mysql matches that of mysqldump --xml. See the section of the Manual which discusses the --xml option for mysqldump for details.

You can also set the following variables by using --var_name=value syntax:

•   connect_timeout

    The number of seconds before connection timeout. (Default value is 0.)

•   max_allowed_packet

    The maximum packet length to send to or receive from the server. (Default value is 16MB.)

•   max_join_size

    The automatic limit for rows in a join when using --safe-updates. (Default value is 1,000,000.)

•   net_buffer_length

    The buffer size for TCP/IP and socket communication. (Default value is 16KB.)

•   select_limit

    The automatic limit for SELECT statements when using --safe-updates. (Default value is 1,000.)

It is also possible to set variables by using --set-variable=var_name=value or -O var_name=value syntax. This syntax is deprecated.

On Unix, the mysql client writes a record of executed statements to a history file. By default, the history file is named .mysql_history and is created in your home directory. To specify a different file, set the value of the MYSQL_HISTFILE environment variable.

If you do not want to maintain a history file, first remove .mysql_history if it exists, and then use either of the following techniques:

•   Set the MYSQL_HISTFILE variable to /dev/null. To cause this setting to take effect each time you log in, put the setting in one of your shell's startup files.

•   Create .mysql_history as a symbolic link to /dev/null:

    shell> ln -s /dev/null $HOME/.mysql_history
You need do this only once.

MYSQL COMMANDS

mysql sends each SQL statement that you issue to the server to be executed. There is also a set of commands that mysql itself interprets. For a list of these commands, type help or \h at the mysql> prompt:

    mysql> help
    List of all MySQL commands:
    Note that all text commands must be first on line and end with ';'
    ?         (\?) Synonym for `help'.
    charset   (\C) Switch to another charset. Might be needed for processing
                   binlog with multi-byte charsets.
    clear     (\c) Clear command.
    connect   (\r) Reconnect to the server. Optional arguments are db and host.
    delimiter (\d) Set statement delimiter. NOTE: Takes the rest of the line as
                   new delimiter.
    edit      (\e) Edit command with $EDITOR.
    ego       (\G) Send command to mysql server, display result vertically.
    exit      (\q) Exit mysql. Same as quit.
    go        (\g) Send command to mysql server.
    help      (\h) Display this help.
    nopager   (\n) Disable pager, print to stdout.
    notee     (\t) Don't write into outfile.
    pager     (\P) Set PAGER [to_pager]. Print the query results via PAGER.
    print     (\p) Print current command.
    prompt    (\R) Change your mysql prompt.
    quit      (\q) Quit mysql.
    rehash    (\#) Rebuild completion hash.
    source    (\.) Execute an SQL script file. Takes a file name as an argument.
    status    (\s) Get status information from the server.
    system    (\!) Execute a system shell command.
    tee       (\T) Set outfile [to_outfile]. Append everything into given
                   outfile.
    use       (\u) Use another database. Takes database name as argument.
    warnings  (\W) Show warnings after every statement.
    nowarning (\w) Don't show warnings after every statement.
    For server side help, type 'help contents'

Each command has both a long and short form. The long form is not case sensitive; the short form is. The long form can be followed by an optional semicolon terminator, but the short form should not.

If you provide an argument to the help command, mysql uses it as a search string to access server-side help from the contents of the MySQL Reference Manual. For more information, see the section called “MYSQL SERVER-SIDE HELP”.

The charset command changes the default character set and issues a SET NAMES statement. This enables the character set to remain synchronized on the client and server if mysql is run with auto-reconnect enabled (which is not recommended), because the changed character set is used for reconnects. This command was added in MySQL 5.0.25.

In the delimiter command, you should avoid the use of the backslash (‘\’) character because that is the escape character for MySQL.

The edit, nopager, pager, and system commands work only in Unix.

The status command provides some information about the connection and the server you are using. If you are running in --safe-updates mode, status also prints the values for the mysql variables that affect your queries.

To log queries and their output, use the tee command. All the data displayed on the screen is appended into a given file. This can be very useful for debugging purposes also. You can enable this feature on the command line with the --tee option, or interactively with the tee command. The tee file can be disabled interactively with the notee command. Executing tee again re-enables logging. Without a parameter, the previous file is used. Note that tee flushes query results to the file after each statement, just before mysql prints its next prompt.

By using the --pager option, it is possible to browse or search query results in interactive mode with Unix programs such as less, more, or any other similar program. If you specify no value for the option, mysql checks the value of the PAGER environment variable and sets the pager to that. Output paging can be enabled interactively with the pager command and disabled with nopager. The command takes an optional argument; if given, the paging program is set to that. With no argument, the pager is set to the pager that was set on the command line, or stdout if no pager was specified.

Output paging works only in Unix because it uses the popen() function, which does not exist on Windows. For Windows, the tee option can be used instead to save query output, although this is not as convenient as pager for browsing output in some situations.

Here are a few tips about the pager command:

•   You can use it to write to a file and the results go only to the file:

    mysql> pager cat > /tmp/log.txt
You can also pass any options for the program that you want to use as your pager:

    mysql> pager less -n -i -S

•   In the preceding example, note the -S option. You may find it very useful for browsing wide query results. Sometimes a very wide result set is difficult to read on the screen. The -S option to less can make the result set much more readable because you can scroll it horizontally using the left-arrow and right-arrow keys. You can also use -S interactively within less to switch the horizontal-browse mode on and off. For more information, read the less manual page:

    shell> man less

•   You can specify very complex pager commands for handling query output:

    mysql> pager cat | tee /dr1/tmp/res.txt \
              | tee /dr2/tmp/res2.txt | less -n -i -S
In this example, the command would send query results to two files in two different directories on two different filesystems mounted on /dr1 and /dr2, yet still display the results onscreen via less.

You can also combine the tee and pager functions. Have a tee file enabled and pager set to less, and you are able to browse the results using the less program and still have everything appended into a file the same time. The difference between the Unix tee used with the pager command and the mysql built-in tee command is that the built-in tee works even if you do not have the Unix tee available. The built-in tee also logs everything that is printed on the screen, whereas the Unix tee used with pager does not log quite that much. Additionally, tee file logging can be turned on and off interactively from within mysql. This is useful when you want to log some queries to a file, but not others.

The default mysql> prompt can be reconfigured. The string for defining the prompt can contain the following special sequences:
Option | Description
\t | A tab character
\ | A space (a space follows the backslash)
 | A space
\R | The current time, in 24-hour military time (0-23)
\r | The current time, standard 12-hour time (1-12)
\m | Minutes of the current time
\y | The current year, two digits
\Y | The current year, four digits
\D | The full current date
\s | Seconds of the current time
\v | The server version
\w | The current day of the week in three-letter format (Mon, Tue, ...)
\P | am/pm
\o | The current month in numeric format
\O | The current month in three-letter format (Jan, Feb, ...)
\c | A counter that increments for each statement you issue
\l | The current delimiter. (New in 5.0.25)
\S | Semicolon
\' | Single quote
\" | Double quote
\d | The default database
\h | The server host
\p | The current TCP/IP port or socket file
\u | Your username
\U | Your full user_name@host_name account name
\\ | A literal ‘\’ backslash character
\n | A newline character

‘\’ followed by any other letter just becomes that letter.

If you specify the prompt command with no argument, mysql resets the prompt to the default of mysql>.

You can set the prompt in several ways:

•   Use an environment variable. You can set the MYSQL_PS1 environment variable to a prompt string. For example:

    shell> export MYSQL_PS1="(\u@\h) [\d]> "

•   Use a command-line option. You can set the --prompt option on the command line to mysql. For example:

    shell> mysql --prompt="(\u@\h) [\d]> "
    (user@host) [database]>

•   Use an option file. You can set the prompt option in the [mysql] group of any MySQL option file, such as /etc/my.cnf or the .my.cnf file in your home directory. For example:

    [mysql]
    prompt=(\\u@\\h) [\\d]>\\_
In this example, note that the backslashes are doubled. If you set the prompt using the prompt option in an option file, it is advisable to double the backslashes when using the special prompt options. There is some overlap in the set of allowable prompt options and the set of special escape sequences that are recognized in option files. (These sequences are listed in Section 3.2, “Using Option Files”.) The overlap may cause you problems if you use single backslashes. For example, \s is interpreted as a space rather than as the current seconds value. The following example shows how to define a prompt within an option file to include the current time in HH:MM:SS> format:

    [mysql]
    prompt="\\r:\\m:\\s> "

•   Set the prompt interactively. You can change your prompt interactively by using the prompt (or \R) command. For example:

    mysql> prompt (\u@\h) [\d]>\_
    PROMPT set to '(\u@\h) [\d]>\_'
    (user@host) [database]>
    (user@host) [database]> prompt
    Returning to default PROMPT of mysql>
    mysql>

MYSQL SERVER-SIDE HELP

    mysql> help search_string

If you provide an argument to the help command, mysql uses it as a search string to access server-side help from the contents of the MySQL Reference Manual. The proper operation of this command requires that the help tables in the mysql database be initialized with help topic information (see the section called “SERVER-SIDE HELP”).

If there is no match for the search string, the search fails:

    mysql> help me
    Nothing found
    Please try to run 'help contents' for a list of all accessible topics

Use help contents to see a list of the help categories:

    mysql> help contents
    You asked for help about help category: "Contents"
    For more information, type 'help <item>', where <item> is one of the
    following categories:
       Account Management
       Administration
       Data Definition
       Data Manipulation
       Data Types
       Functions
       Functions and Modifiers for Use with GROUP BY
       Geographic Features
       Language Structure
       Storage Engines
       Stored Routines
       Table Maintenance
       Transactions
       Triggers

If the search string matches multiple items, mysql shows a list of matching topics:

    mysql> help logs
    Many help items for your request exist.
    To make a more specific request, please type 'help <item>',
    where <item> is one of the following topics:
       SHOW
       SHOW BINARY LOGS
       SHOW ENGINE
       SHOW LOGS

Use a topic as the search string to see the help entry for that topic:

    mysql> help show binary logs
    Name: 'SHOW BINARY LOGS'
    Description:
    Syntax:
    SHOW BINARY LOGS
    SHOW MASTER LOGS
    Lists the binary log files on the server. This statement is used as
    part of the procedure described in [purge-master-logs], that shows how
    to determine which logs can be purged.
    mysql> SHOW BINARY LOGS;
    +---------------+-----------+
    | Log_name      | File_size |
    +---------------+-----------+
    | binlog.000015 |    724935 |
    | binlog.000016 |    733481 |
    +---------------+-----------+

EXECUTING SQL STATEMENTS FROM A TEXT FILE

The mysql client typically is used interactively, like this:

    shell> mysql db_name

However, it is also possible to put your SQL statements in a file and then tell mysql to read its input from that file. To do so, create a text file text_file that contains the statements you wish to execute. Then invoke mysql as shown here:

    shell> mysql db_name < text_file

If you place a USE db_name statement as the first statement in the file, it is unnecessary to specify the database name on the command line:

    shell> mysql < text_file

If you are already running mysql, you can execute an SQL script file using the source or \. command:

    mysql> source file_name
    mysql> \. file_name

Sometimes you may want your script to display progress information to the user. For this you can insert statements like this:

    SELECT '<info_to_display>' AS ' ';

The statement shown outputs <info_to_display>.

For more information about batch mode, see Section 5, “Using mysql in Batch Mode”.

MYSQL TIPS

This section describes some techniques that can help you use mysql more effectively.

  Displaying Query Results Vertically

Some query results are much more readable when displayed vertically, instead of in the usual horizontal table format. Queries can be displayed vertically by terminating the query with \G instead of a semicolon. For example, longer text values that include newlines often are much easier to read with vertical output:

    mysql> SELECT * FROM mails WHERE LENGTH(txt) < 300 LIMIT 300,1\G
    *************************** 1. row ***************************
      msg_nro: 3068
         date: 2000-03-01 23:29:50
    time_zone: +0200
    mail_from: Monty
        reply: monty@no.spam.com
      mail_to: "Thimble Smith" <tim@no.spam.com>
          sbj: UTF-8
          txt: >>>>> "Thimble" == Thimble Smith writes:
    Thimble> Hi.  I think this is a good idea.  Is anyone familiar
    Thimble> with UTF-8 or Unicode? Otherwise, I'll put this on my
    Thimble> TODO list and see what happens.
    Yes, please do that.
    Regards,
    Monty
         file: inbox-jani-1
         hash: 190402944
    1 row in set (0.09 sec)

  Using the --safe-updates Option

For beginners, a useful startup option is --safe-updates (or --i-am-a-dummy, which has the same effect). It is helpful for cases when you might have issued a DELETE FROM tbl_name statement but forgotten the WHERE clause. Normally, such a statement deletes all rows from the table. With --safe-updates, you can delete rows only by specifying the key values that identify them. This helps prevent accidents.

When you use the --safe-updates option, mysql issues the following statement when it connects to the MySQL server:

    SET SQL_SAFE_UPDATES=1,SQL_SELECT_LIMIT=1000, SQL_MAX_JOIN_SIZE=1000000;

See Section 5.3, “SET Syntax”.

The SET statement has the following effects:

•   You are not allowed to execute an UPDATE or DELETE statement unless you specify a key constraint in the WHERE clause or provide a LIMIT clause (or both). For example:

    UPDATE tbl_name SET not_key_column=val WHERE key_column=val;
    UPDATE tbl_name SET not_key_column=val LIMIT 1;

•   The server limits all large SELECT results to 1,000 rows unless the statement includes a LIMIT clause.

•   The server aborts multiple-table SELECT statements that probably need to examine more than 1,000,000 row combinations.

To specify limits different from 1,000 and 1,000,000, you can override the defaults by using the --select_limit and --max_join_size options:

    shell> mysql --safe-updates --select_limit=500 --max_join_size=10000

  Disabling mysql Auto-Reconnect

If the mysql client loses its connection to the server while sending a query, it immediately and automatically tries to reconnect once to the server and send the query again. However, even if mysql succeeds in reconnecting, your first connection has ended and all your previous session objects and settings are lost: temporary tables, the autocommit mode, and user-defined and session variables. Also, any current transaction rolls back. This behavior may be dangerous for you, as in the following example where the server was shut down and restarted without you knowing it:

    mysql> SET @a=1;
    Query OK, 0 rows affected (0.05 sec)
    mysql> INSERT INTO t VALUES(@a);
    ERROR 2006: MySQL server has gone away
    No connection. Trying to reconnect...
    Connection id:    1
    Current database: test
    Query OK, 1 row affected (1.30 sec)
    mysql> SELECT * FROM t;
    +------+
    | a    |
    +------+
    | NULL |
    +------+
    1 row in set (0.05 sec)

The @a user variable has been lost with the connection, and after the reconnection it is undefined. If it is important to have mysql terminate with an error if the connection has been lost, you can start the mysql client with the --skip-reconnect option.

COPYRIGHT

Copyright 1997-2006 MySQL AB

This documentation is NOT distributed under a GPL license. Use of this documentation is subject to the following terms: You may create a printed copy of this documentation solely for your own personal use. Conversion to other formats is allowed as long as the actual content is not altered or edited in any way. You shall not publish or distribute this documentation in any form or on any media, except if you distribute the documentation in a manner similar to how MySQL disseminates it (that is, electronically for download on a Web site with the software) or on a CD-ROM or similar medium, provided however that the documentation is disseminated together with the software on the same medium. Any other use, such as any dissemination of printed copies or use of this documentation, in whole or in part, in another publication, requires the prior written consent from an authorized representative of MySQL AB. MySQL AB reserves any and all rights to this documentation not expressly granted above.

Please email <docs@mysql.com> for more information.

SEE ALSO
msql2mysql(1), my_print_defaults(1), myisam_ftdump(1), myisamchk(1), myisamlog(1), myisampack(1), mysql.server(1), mysql_config(1), mysql_explain_log(1), mysql_fix_privilege_tables(1), mysql_tzinfo_to_sql(1), mysql_upgrade(1), mysql_zap(1), mysqlaccess(1), mysqladmin(1), mysqlbinlog(1), mysqlcheck(1), mysqld(8), mysqld_multi(1), mysqld_safe(1), mysqldump(1), mysqlhotcopy(1), mysqlimport(1), mysqlmanager(8), mysqlshow(1), perror(1), replace(1), safe_mysqld(1)

For more information, please refer to the MySQL Reference Manual, which may already be installed locally and which is also available online at http://dev.mysql.com/doc/.

AUTHOR
MySQL AB (http://www.mysql.com/). This software comes with no warranty.