Post-installation instructions for X.Org on OpenBSD/sparc
---------------------------------------------------------

1. Sun setup is easy:

   Typical Xorg use on Sun sparc-based machines requires no special
   configuration.  The provided /etc/X11/xorg.conf will work in most
   setups.

   However, multi-headed configurations will require some changes to this
   file. Starting from the existing /etc/X11/xorg.conf, three additional
   sections are added for the second framebuffer:

	Section "Device"
		Identifier      "Wsdisplay1"
		Driver          "wsfb"
		Option          "device" "/dev/ttyD0"
	EndSection

	Section "Monitor"
		Identifier   "Monitor1"
		VendorName   "Unknown"
		ModelName    "Unknown"
	# Adjust those to your monitor before using another device than wsfb
	# or you can destroy it !!
		HorizSync    31.5-60
		VertRefresh  50-70
	EndSection

	Section "Screen"
		Identifier "Screen1"
		Device     "Wsdisplay1"
		Monitor    "Monitor1"
		SubSection "Display"
			Depth     1
		EndSubSection
		SubSection "Display"
			Depth     8
		EndSubSection
		SubSection "Display"
			Depth     16
		EndSubSection
		SubSection "Display"
			Depth     24
		EndSubSection
		SubSection "Display"
			Depth     32
		EndSubSection
	EndSection
   
   The ServerLayout section is also changed to include the second framebuffer
   and its logical location relative to the first, eg:

	Section "ServerLayout"
		Identifier	"wsfb"
		Screen  0       "Screen0"
		Screen  1       "Screen1" RightOf "Screen0"
		InputDevice	"zsmouse0" "CorePointer"
		InputDevice	"Keyboard0" "CoreKeyboard"
	EndSection

   See xorg.conf(5) for more options.

2. Start either xdm(1) or startx(1).

   a. Start xdm(1), the X display manager by activating the xdm_flags option
      in /etc/rc.conf(8) or /etc/rc.conf.local(8).  You do not need to disable
      the console getty.

   b. Start startx(1) from a console shell.  It is the X script that starts
      the X server and a few X applications, including a window manager.


------------------------
If you encounter a problem, you can browse the entire documentation 
in /usr/X11R6/lib/X11/doc.

$OpenBSD: README.sparc,v 1.1.1.1 2006/11/27 11:25:45 matthieu Exp $
