%# BEGIN BPS TAGGED BLOCK {{{ %# %# COPYRIGHT: %# %# This software is Copyright (c) 1996-2006 Best Practical Solutions, LLC %# %# %# (Except where explicitly superseded by other copyright notices) %# %# %# LICENSE: %# %# This work is made available to you under the terms of Version 2 of %# the GNU General Public License. A copy of that license should have %# been provided with this software, but in any event can be snarfed %# from www.gnu.org. %# %# This work is distributed in the hope that it will be useful, but %# WITHOUT ANY WARRANTY; without even the implied warranty of %# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU %# General Public License for more details. %# %# You should have received a copy of the GNU General Public License %# along with this program; if not, write to the Free Software %# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. %# %# %# CONTRIBUTION SUBMISSION POLICY: %# %# (The following paragraph is not intended to limit the rights granted %# to you to modify and distribute this software under the terms of %# the GNU General Public License and is only of importance to you if %# you choose to contribute your changes and enhancements to the %# community by submitting them to Best Practical Solutions, LLC.) %# %# By intentionally submitting any modifications, corrections or %# derivatives to this work, or any other work intended for use with %# Request Tracker, to Best Practical Solutions, LLC, you confirm that %# you are the copyright holder for those contributions and you grant %# Best Practical Solutions, LLC a nonexclusive, worldwide, irrevocable, %# royalty-free, perpetual, license to use, copy, create derivative %# works based on those contributions, and sublicense and distribute %# those contributions and any derivatives thereof. %# %# END BPS TAGGED BLOCK }}} %# %# Data flow here: %# The page receives a Query from the previous page, and maybe arguments %# corresponding to actions. (If it doesn't get a Query argument, it pulls %# one out of the session hash. Also, it could be getting just a raw query from %# Build/Edit.html (Advanced).) %# %# After doing some stuff with default arguments and saved searches, the ParseQuery %# function (which is similar to, but not the same as, _parser in RT/Tickets_Overlay_SQL) %# converts the Query into a RT::Interface::Web::QueryBuilder::Tree. This mason file %# then adds stuff to or modifies the tree based on the actions that had been requested %# by clicking buttons. It then calls GetQueryAndOptionList on the tree to generate %# the SQL query (which is saved as a hidden input) and the option list for the Clauses %# box in the top right corner. %# %# Worthwhile refactoring: the tree manipulation code for the actions could use some cleaning %# up. The node-adding code is different in the "add" actions from in ParseQuery, which leads %# to things like ParseQuery correctly not quoting numbers in numerical fields, while the "add" %# action does quote it (this breaks SQLite). %# <& /Elements/Header, Title => $title &> <& /Ticket/Elements/Tabs, current_tab => "Search/Build.html".$QueryString, Title => $title, Format => $Format, Query => $Query, Order => $Order, OrderBy => $OrderBy, Rows => $RowsPerPage &>

<& Elements/PickCriteria, query => $Query, cfqueues => $queues &> <& /Elements/Submit, Caption => loc('Add these terms to your search'), Label => loc('Add'), Name => 'AddClause'&> | <& Elements/EditQuery, %ARGS, actions => \@actions, optionlist => $optionlist, Description => $Description &> <& /Elements/Submit, Label => loc('Add and Search'), Name => 'DoSearch'&>
<& Elements/EditSearches, CurrentSearch => $search_hash, Dirty => $dirty, SearchId => $SearchId &>
<& Elements/DisplayOptions, %ARGS, Format=> $Format, AvailableColumns => $AvailableColumns, CurrentFormat => $CurrentFormat, RowsPerPage => $RowsPerPage, OrderBy => $OrderBy, Order => $Order &> <& /Elements/Submit, Label => loc('Add and Search'), Name => 'DoSearch'&>

<%INIT> use RT::Interface::Web::QueryBuilder; use RT::Interface::Web::QueryBuilder::Tree; my $search_hash = {}; my $search; my $title = loc("Query Builder"); # {{{ Clear out unwanted data if ( $NewQuery or $ARGS{'Delete'} ) { # Wipe all data-carrying variables clear if we want a new # search, or we're deleting an old one.. $Query = ''; $Format = ''; $Description = ''; $SearchId = ''; $Order = ''; $OrderBy = ''; $RowsPerPage = ''; # ($search hasn't been set yet; no need to clear) # ..then wipe the session out.. undef $session{'CurrentSearchHash'}; # ..and the search results. $session{'tickets'}->CleanSlate() if defined $session{'tickets'}; } # }}} if (ref $OrderBy eq "ARRAY") { $OrderBy = join("|", @$OrderBy); } if (ref $Order eq "ARRAY") { $Order = join("|", @$Order); } # {{{ Attempt to load what we can from the session, set defaults # We don't read or write to the session again until the end $search_hash = $session{'CurrentSearchHash'}; # Read from user preferences my $prefs = $session{'CurrentUser'}->UserObj->Preferences("SearchDisplay") || {}; # These variables are what define a search_hash; this is also # where we give sane defaults. $Query ||= $search_hash->{'Query'}; $Format ||= $search_hash->{'Format'} || $prefs->{'Format'}; $Description ||= $search_hash->{'Description'}; $SearchId ||= $search_hash->{'SearchId'} || 'new'; $Order ||= $search_hash->{'Order'} || $prefs->{'Order'} || 'ASC'; $OrderBy ||= $search_hash->{'OrderBy'} || $prefs->{'OrderBy'} || 'id'; unless ( defined $RowsPerPage ) { if ( defined $search_hash->{'RowsPerPage'} ) { $RowsPerPage = $search_hash->{'RowsPerPage'}; } elsif ( defined $prefs->{'RowsPerPage'} ) { $RowsPerPage = $prefs->{'RowsPerPage'}; } else { $RowsPerPage = 50; } } $search ||= $search_hash->{'Object'}; # }}} my @actions = (); # Clean unwanted junk from the format $Format = $m->comp( '/Elements/ScrubHTML', Content => $Format ) if ($Format); # {{{ If we're asked to delete the current search, make it go away and reset the search parameters if ( $ARGS{'Delete'} ) { # We set $SearchId to 'new' above already, so peek into the %ARGS my ($container_object, $search_id) = _parse_saved_search ($ARGS{'SearchId'}); if ($container_object && $container_object->id) { # We have the object the entry is an attribute on; delete the # entry.. $container_object->Attributes->DeleteEntry( Name => 'SavedSearch', id => $search_id ); } } # }}} # {{{ If the user wants to copy a search, uncouple from the one that this was based on, but don't erase the $Query or $Format if ( $ARGS{'CopySearch'} ) { $SearchId = 'new'; $search = undef; $Description = loc( "[_1] copy", $Description ); } # }}} # {{{ if we're asked to revert the current search, we just want to load it if ( $ARGS{'Revert'} ) { $ARGS{'LoadSavedSearch'} = $SearchId; } # }}} # {{{ if we're asked to load a search, load it. if ( my ($container_object, $search_id ) = _parse_saved_search ($ARGS{'LoadSavedSearch'})) { $search = $container_object->Attributes->WithId($search_id); # We have a $search and now; import the others $SearchId = $ARGS{'LoadSavedSearch'}; $Description = $search->Description; $Format = $search->SubValue('Format'); $Query = $search->SubValue('Query'); $Order = $search->SubValue('Order'); $OrderBy = $search->SubValue('OrderBy'); $RowsPerPage = $search->SubValue('RowsPerPage'); } # }}} # {{{ if we're asked to save the current search, save it if ( $ARGS{'Save'} ) { if ( $search && $search->id ) { # permission check if ($search->Object->isa('RT::System')) { unless ($session{'CurrentUser'}->HasRight( Object=> $RT::System, Right => 'SuperUser')) { Abort("No permission to save system-wide searches"); } } # This search is based on a previously loaded search -- so # just update the current search object with new values $search->SetSubValues( Format => $Format, Query => $Query, Order => $Order, OrderBy => $OrderBy, RowsPerPage => $RowsPerPage, ); $search->SetDescription($Description); } elsif ( $SearchId eq 'new' ) { my $saved_search = RT::SavedSearch->new( $session{'CurrentUser'} ); my ( $ok, $search_msg ) = $saved_search->Save( Privacy => $ARGS{'Owner'}, Name => $Description, SearchParams => { Format => $Format, Query => $Query, Order => $Order, OrderBy => $OrderBy, RowsPerPage => $RowsPerPage } ); if ($ok) { $search = $session{'CurrentUser'}->UserObj->Attributes->WithId($saved_search->Id); # Build new SearchId $SearchId = ref( $session{'CurrentUser'}->UserObj ) . '-' . $session{'CurrentUser'}->UserObj->Id . '-SavedSearch-' . $search->Id; } else { push @actions, [ loc("Can't find a saved search to work with").': '.loc($search_msg), 0 ]; } } else { push @actions, [ loc("Can't save this search"), 0 ]; } } # }}} # {{{ Parse the query use Regexp::Common qw /delimited/; # States use constant VALUE => 1; use constant AGGREG => 2; use constant OP => 4; use constant PAREN => 8; use constant KEYWORD => 16; my $_match = sub { # Case insensitive equality my ( $y, $x ) = @_; return 1 if $x =~ /^$y$/i; # return 1 if ((lc $x) eq (lc $y)); # Why isnt this equiv? return 0; }; my $ParseQuery = sub { my $string = shift; my $tree = shift; my $actions = shift; my $want = KEYWORD | PAREN; my $last = undef; my $depth = 1; # make a tree root $$tree = RT::Interface::Web::QueryBuilder::Tree->new; my $root = RT::Interface::Web::QueryBuilder::Tree->new( 'AND', $$tree ); my $parentnode = $root; # get the FIELDS from Tickets_Overlay my $tickets = new RT::Tickets( $session{'CurrentUser'} ); my %FIELDS = %{ $tickets->FIELDS }; # Lower Case version of FIELDS, for case insensitivity my %lcfields = map { ( lc($_) => $_ ) } ( keys %FIELDS ); my @tokens = qw[VALUE AGGREG OP PAREN KEYWORD]; my $re_aggreg = qr[(?i:AND|OR)]; my $re_value = qr[$RE{delimited}{-delim=>qq{\'\"}}|\d+]; my $re_keyword = qr[$RE{delimited}{-delim=>qq{\'\"}}|(?:\{|\}|\w|\.)+]; my $re_op = qr[=|!=|>=|<=|>|<|(?i:IS NOT)|(?i:IS)|(?i:NOT LIKE)|(?i:LIKE)] ; # long to short my $re_paren = qr'\(|\)'; # assume that $ea is AND if it is not set my ( $ea, $key, $op, $value ) = ( "AND", "", "", "" ); # order of matches in the RE is important.. op should come early, # because it has spaces in it. otherwise "NOT LIKE" might be parsed # as a keyword or value. while ( $string =~ /( $re_aggreg |$re_op |$re_keyword |$re_value |$re_paren )/igx ) { my $val = $1; my $current = 0; # Highest priority is last $current = OP if $_match->( $re_op, $val ); $current = VALUE if $_match->( $re_value, $val ); $current = KEYWORD if $_match->( $re_keyword, $val ) && ( $want & KEYWORD ); $current = AGGREG if $_match->( $re_aggreg, $val ); $current = PAREN if $_match->( $re_paren, $val ); unless ( $current && $want & $current ) { # Error # FIXME: I will only print out the highest $want value my $token = $tokens[ ( ( log $want ) / ( log 2 ) ) ]; push @$actions, [ loc("Error near ->[_1]<- expecting a [_2] in '[_3]'", $val, $token, $string ), -1 ]; } # State Machine: my $parentdepth = $depth; # Parens are highest priority if ( $current & PAREN ) { if ( $val eq "(" ) { $depth++; # make a new node that the clauses can be children of $parentnode = RT::Interface::Web::QueryBuilder::Tree->new( $ea, $parentnode ); } else { $depth--; $parentnode = $parentnode->getParent(); } $want = KEYWORD | PAREN | AGGREG; } elsif ( $current & AGGREG ) { $ea = $val; $parentnode->setNodeValue($ea); $want = KEYWORD | PAREN; } elsif ( $current & KEYWORD ) { $key = $val; $want = OP; } elsif ( $current & OP ) { $op = $val; $want = VALUE; } elsif ( $current & VALUE ) { $value = $val; # Remove surrounding quotes from $key, $val # (in future, simplify as for($key,$val) { action on $_ }) if ( $key =~ /$RE{delimited}{-delim=>qq{\'\"}}/ ) { substr( $key, 0, 1 ) = ""; substr( $key, -1, 1 ) = ""; } if ( $val =~ /$RE{delimited}{-delim=>qq{\'\"}}/ ) { substr( $val, 0, 1 ) = ""; substr( $val, -1, 1 ) = ""; } # Unescape escaped characters $key =~ s!\\(.)!$1!g; $val =~ s!\\(.)!$1!g; my $class; my ($key_base, $subkey) = split(/\./,$key,2); $key_base =~ s/\..*$//; # Strip off .EmailAddress, for example if ( exists $lcfields{lc $key_base } ) { $key = $lcfields{lc $key_base } . (defined $subkey ? '.'.$subkey : ''); $class = $FIELDS{$key_base}->[0]; } elsif ( $key =~ /^C(?:ustom)?F(?:ield)?\.{(.*)}$/i ) { $class = $FIELDS{'CF'}->[0]; } if ( $class ne 'INT' ) { $val = "'$val'"; } push @$actions, [ loc("Unknown field: $key"), -1 ] unless $class; $want = PAREN | AGGREG; } else { push @$actions, [ loc("I'm lost"), -1 ]; } if ( $current & VALUE ) { if ( $key =~ /^CF./ ) { $key = "'" . $key . "'"; } my $clause = { Key => $key, Op => $op, Value => $val }; # explicity add a child to it RT::Interface::Web::QueryBuilder::Tree->new( $clause, $parentnode ); ( $ea, $key, $op, $value ) = ( "", "", "", "" ); } $last = $current; } # while push @$actions, [ loc("Incomplete query"), -1 ] unless ( ( $want | PAREN ) || ( $want | KEYWORD ) ); push @$actions, [ loc("Incomplete Query"), -1 ] unless ( $last && ( $last | PAREN ) || ( $last || VALUE ) ); # This will never happen, because the parser will complain push @$actions, [ loc("Mismatched parentheses"), -1 ] unless $depth == 1; }; my $tree; { my @parsing_errors; $ParseQuery->( $Query, \$tree, \@parsing_errors ); # if parsing went poorly, send them to the edit page # to fix it if ( @parsing_errors ) { return $m->comp( "Edit.html", Query => $Query, actions => \@parsing_errors ); } } $Query = ""; my @options = $tree->GetDisplayedNodes; my @current_values = grep { defined } @options[@clauses]; # {{{ Move things around if ( $ARGS{"Up"} ) { if (@current_values) { foreach my $value (@current_values) { my $index = $value->getIndex(); if ( $value->getIndex() > 0 ) { my $parent = $value->getParent(); $parent->removeChild($index); $parent->insertChild( $index - 1, $value ); $value = $parent->getChild( $index - 1 ); } else { push( @actions, [ loc("error: can't move up"), -1 ] ); } } } else { push( @actions, [ loc("error: nothing to move"), -1 ] ); } } elsif ( $ARGS{"Down"} ) { if (@current_values) { foreach my $value (@current_values) { my $index = $value->getIndex(); my $parent = $value->getParent(); if ( $value->getIndex() < ( $parent->getChildCount - 1 ) ) { $parent->removeChild($index); $parent->insertChild( $index + 1, $value ); $value = $parent->getChild( $index + 1 ); } else { push( @actions, [ loc("error: can't move down"), -1 ] ); } } } else { push( @actions, [ loc("error: nothing to move"), -1 ] ); } } elsif ( $ARGS{"Left"} ) { if (@current_values) { foreach my $value (@current_values) { my $parent = $value->getParent(); my $grandparent = $parent->getParent(); if ( !$grandparent->isRoot ) { my $index = $parent->getIndex(); $parent->removeChild($value); $grandparent->insertChild( $index, $value ); if ( $parent->isLeaf() ) { $grandparent->removeChild($parent); } } else { push( @actions, [ loc("error: can't move left"), -1 ] ); } } } else { push( @actions, [ loc("error: nothing to move"), -1 ] ); } } elsif ( $ARGS{"Right"} ) { if (@current_values) { foreach my $value (@current_values) { my $parent = $value->getParent(); my $index = $value->getIndex(); my $newparent; if ( $index > 0 ) { my $sibling = $parent->getChild( $index - 1 ); if ( ref( $sibling->getNodeValue ) ) { $parent->removeChild($value); my $newtree = RT::Interface::Web::QueryBuilder::Tree->new( 'AND', $parent ); $newtree->addChild($value); } else { $parent->removeChild($index); $sibling->addChild($value); } } else { $parent->removeChild($value); $newparent = RT::Interface::Web::QueryBuilder::Tree->new( 'AND', $parent ); $newparent->addChild($value); } } } else { push( @actions, [ loc("error: nothing to move"), -1 ] ); } } elsif ( $ARGS{"DeleteClause"} ) { if (@current_values) { $_->getParent()->removeChild($_) for @current_values; @current_values = (); } else { push( @actions, [ loc("error: nothing to delete"), -1 ] ); } } elsif ( $ARGS{"Toggle"} ) { my $ea; if (@current_values) { foreach my $value (@current_values) { my $parent = $value->getParent(); if ( $parent->getNodeValue eq 'AND' ) { $parent->setNodeValue('OR'); } else { $parent->setNodeValue('AND'); } } } else { push( @actions, [ loc("error: nothing to toggle"), -1 ] ); } } # {{{ Try to find if we're adding a clause foreach my $arg ( keys %ARGS ) { if ( $arg =~ m/^ValueOf(\w+|'CF.{.*?}')$/ && ( ref $ARGS{$arg} eq "ARRAY" ? grep { $_ ne "" } @{ $ARGS{$arg} } : $ARGS{$arg} ne "" ) ) { # We're adding a $1 clause my $field = $1; my ( $keyword, $op, $value ); #figure out if it's a grouping if ( $ARGS{ $field . "Field" } ) { $keyword = $ARGS{ $field . "Field" }; } else { $keyword = $field; } my ( @ops, @values ); if ( ref $ARGS{ 'ValueOf' . $field } eq "ARRAY" ) { # we have many keys/values to iterate over, because there is # more than one CF with the same name. @ops = @{ $ARGS{ $field . 'Op' } }; @values = @{ $ARGS{ 'ValueOf' . $field } }; } else { @ops = ( $ARGS{ $field . 'Op' } ); @values = ( $ARGS{ 'ValueOf' . $field } ); } $RT::Logger->error("Bad Parameters passed into Query Builder") unless @ops == @values; for my $i ( 0 .. @ops - 1 ) { my ( $op, $value ) = ( $ops[$i], $values[$i] ); next if $value eq ""; if ( $value eq 'NULL' && $op =~ /=/ ) { if ( $op eq '=' ) { $op = "IS"; } elsif ( $op eq '!=' ) { $op = "IS NOT"; } # This isn't "right", but... # It has to be this way until #5182 is fixed $value = "'NULL'"; } else { $value = "'$value'"; } my $clause = { Key => $keyword, Op => $op, Value => $value }; my $newnode = RT::Interface::Web::QueryBuilder::Tree->new($clause); if (@current_values) { foreach my $value (@current_values) { my $newindex = $value->getIndex() + 1; $value->insertSibling( $newindex, $newnode ); $value = $newnode; } } else { $tree->getChild(0)->addChild($newnode); @current_values = $newnode; } $newnode->getParent()->setNodeValue( $ARGS{'AndOr'} ); } } } # }}} $tree->PruneChildlessAggregators; # }}} # {{{ Rebuild $Query based on the additions / movements $Query = ""; my $optionlist_arrayref; ($Query, $optionlist_arrayref) = $tree->GetQueryAndOptionList(\@current_values); my $optionlist = join "\n", map { qq({SELECTED}>) . (" " x (5 * $_->{DEPTH})) . $m->interp->apply_escapes($_->{TEXT}, 'h') . qq() } @$optionlist_arrayref; # }}} # }}} my $queues = $tree->GetReferencedQueues; # {{{ Deal with format changes my ( $AvailableColumns, $CurrentFormat ); ( $Format, $AvailableColumns, $CurrentFormat ) = $m->comp( 'Elements/BuildFormatString', cfqueues => $queues, %ARGS, Format => $Format ); # }}} # {{{ If we're modifying an old query, check if it has changed my $dirty = 0; $dirty = 1 if defined $search and ($search->SubValue('Format') ne $Format or $search->SubValue('Query') ne $Query or $search->SubValue('Order') ne $Order or $search->SubValue('OrderBy') ne $OrderBy or $search->SubValue('RowsPerPage') ne $RowsPerPage ); # }}} # {{{ Push the updates into the session so we don't loose 'em $search_hash->{'SearchId'} = $SearchId; $search_hash->{'Format'} = $Format; $search_hash->{'Query'} = $Query; $search_hash->{'Description'} = $Description; $search_hash->{'Object'} = $search; $search_hash->{'Order'} = $Order; $search_hash->{'OrderBy'} = $OrderBy; $search_hash->{'RowsPerPage'} = $RowsPerPage; $session{'CurrentSearchHash'} = $search_hash; # }}} # {{{ Show the results, if we were asked. if ( $ARGS{"DoSearch"}) { $m->comp( "Results.html", Query => $Query, Format => $Format, Order => $Order, OrderBy => $OrderBy, Rows => $RowsPerPage ); $m->comp('/Elements/Footer'); $m->abort(); } # }}} # {{{ Build a querystring for the tabs my $QueryString; if ($NewQuery) { $QueryString = '?NewQuery=1'; } else { $QueryString = '?' . $m->comp( '/Elements/QueryString', Query => $Query, Format => $Format, Order => $Order, OrderBy => $OrderBy, Rows => $RowsPerPage ) if ($Query); } # }}} <%ARGS> $NewQuery => 0 $SearchId => undef $Query => undef $Format => undef $Description => undef $Order => undef $OrderBy => undef $RowsPerPage => undef $HideResults => 0 @clauses => ()