Chapter 6. Optional features
Prev |  | Next

## Chapter 6. Optional features

## 1. General notes

### 1.1. Enabling/disabling features

Mutt supports several of optional features which can be enabled or disabled at compile-time by giving the configure script certain arguments. These are listed in the ``Optional features'' section of the configure --help output.

Which features are enabled or disabled can later be determined from the output of `mutt -v`. If a compile option starts with ``+'' it is enabled and disabled if prefixed with ``-''. For example, if mutt was compiled using GnuTLS for encrypted communication instead of OpenSSL, `mutt -v` would contain:

    -USE_SSL_OPENSSL +USE_SSL_GNUTLS

### 1.2. URL syntax

Mutt optionally supports the IMAP, POP3 and SMTP protocols which require to access servers using URLs. The canonical syntax for specifying URLs in mutt is (an item enclosed in `[]` means it is optional and may be omitted):

    proto[s]://[username[:password]@]server[:port]/[path]

`proto` is the communication protocol: `imap` for IMAP, `pop` for POP3 and `smtp` for SMTP. If ``s'' for ``secure communication'' is appended, mutt will attempt to establish an encrypted communication using SSL or TLS. If no explicit port is given, mutt will use the system's default for the given protocol.

Since all protocols by mutt support authentication, the username may be given directly in the URL instead of using the `pop_user` or `imap_user` variables. A password can be given, too but is not recommended if the URL is specified in a configuration file on disk.

The optional path is only relevant for IMAP.

For IMAP for example, you can select an alternative port by specifying it with the server: `imap://imapserver:port/INBOX`. You can also specify different username for each folder: `imap://username@imapserver[:port]/INBOX` or `imap://username2@imapserver[:port]/path/to/folder`. Replacing `imap://` by `imaps://` would make mutt attempt to conect using SSL or TLS on a different port to encrypt the communication.

## 2. SSL/TLS Support

If mutt is compiled with IMAP, POP3 and/or SMTP support, it can also be compiled with support for SSL or TLS using either OpenSSL or GnuTLS ( by running the configure script with the --enable-ssl=... option for OpenSSL or --enable-gnutls=... for GnuTLS). Mutt can then attempt to encrypt communication with remote servers if these protocols are suffixed with ``s'' for ``secure communication''.

## 3. POP3 Support

If Mutt was compiled with POP3 support (by running the configure script with the --enable-pop flag), it has the ability to work with mailboxes located on a remote POP3 server and fetch mail for local browsing.

Remote POP3 servers can be accessed using URLs with the `pop` protocol for unencrypted and `pops` for encrypted communication, see Section 1.2, “URL syntax” for details.

Polling for new mail is more expensive over POP3 than locally. For this reason the frequency at which Mutt will check for mail remotely can be controlled by the $pop_checkinterval variable, which defaults to every 60 seconds.

Another way to access your POP3 mail is the fetch-mail function (default: G). It allows to connect to $pop_host, fetch all your new mail and place it in the local $spoolfile. After this point, Mutt runs exactly as if the mail had always been local.

Note: If you only need to fetch all messages to a local mailbox you should consider using a specialized program, such as `fetchmail`, `getmail` or similar.

## 4. IMAP Support

If Mutt was compiled with IMAP support (by running the configure script with the --enable-imap flag), it has the ability to work with folders located on a remote IMAP server.

You can access the remote inbox by selecting the folder by its URL (see Section 1.2, “URL syntax” for details) using the `imap` or `imaps` protocol. Alternatively, a pine-compatible notation is also supported, ie `{[username@]imapserver[:port][/ssl]}path/to/folder`

Note that not all servers use ``/'' as the hierarchy separator. Mutt should correctly notice which separator is being used by the server and convert paths accordingly.

When browsing folders on an IMAP server, you can toggle whether to look at only the folders you are subscribed to, or all folders with the toggle-subscribed command. See also the $imap_list_subscribed variable.

Polling for new mail on an IMAP server can cause noticeable delays. So, you'll want to carefully tune the $mail_check and $timeout variables. Personally I use

    set mail_check=90
    set timeout=15

with relatively good results over my slow modem line.

Note that if you are using mbox as the mail store on UW servers prior to v12.250, the server has been reported to disconnect a client if another client selects the same folder.

### 4.1. The Folder Browser

As of version 1.2, mutt supports browsing mailboxes on an IMAP server. This is mostly the same as the local file browser, with the following differences:

- In lieu of file permissions, mutt displays the string "IMAP", possibly followed by the symbol "+", indicating that the entry contains both messages and subfolders. On Cyrus-like servers folders will often contain both messages and subfolders.

- For the case where an entry can contain both messages and subfolders, the selection key (bound to `enter` by default) will choose to descend into the subfolder view. If you wish to view the messages in that folder, you must use `view-file` instead (bound to `space` by default).

- You can create, delete and rename mailboxes with the `create-mailbox`, `delete-mailbox`, and `rename-mailbox` commands (default bindings: `C`, `d` and `r`, respectively). You may also `subscribe` and `unsubscribe` to mailboxes (normally these are bound to `s` and `u`, respectively).

### 4.2. Authentication

Mutt supports four authentication methods with IMAP servers: SASL, GSSAPI, CRAM-MD5, and LOGIN (there is a patch by Grant Edwards to add NTLM authentication for you poor exchange users out there, but it has yet to be integrated into the main tree). There is also support for the pseudo-protocol ANONYMOUS, which allows you to log in to a public IMAP server without having an account. To use ANONYMOUS, simply make your username blank or "anonymous".

SASL is a special super-authenticator, which selects among several protocols (including GSSAPI, CRAM-MD5, ANONYMOUS, and DIGEST-MD5) the most secure method available on your host and the server. Using some of these methods (including DIGEST-MD5 and possibly GSSAPI), your entire session will be encrypted and invisible to those teeming network snoops. It is the best option if you have it. To use it, you must have the Cyrus SASL library installed on your system and compile mutt with the --with-sasl flag.

Mutt will try whichever methods are compiled in and available on the server, in the following order: SASL, ANONYMOUS, GSSAPI, CRAM-MD5, LOGIN.

There are a few variables which control authentication:

- $imap_user - controls the username under which you request authentication on the IMAP server, for all authenticators. This is overridden by an explicit username in the mailbox path (ie by using a mailbox name of the form `{user@host}`).

- $imap_pass - a password which you may preset, used by all authentication methods where a password is needed.

- $imap_authenticators - a colon-delimited list of IMAP authentication methods to try, in the order you wish to try them. If specified, this overrides mutt's default (attempt everything, in the order listed above).

## 5. SMTP Support

Besides supporting traditional mail delivery through a sendmail-compatible program, mutt supports delivery through SMTP if it was configured and built with `--enable-smtp`.

If the configuration variable $smtp_url is set, mutt will contact the given SMTP server to deliver messages; if it is unset, mutt will use the program specified by $sendmail.

For details on the URL syntax, please see Section 1.2, “URL syntax”.

The built-in SMTP support supports encryption (the `smtps` protocol using SSL or TLS) as well as SMTP authentication using SASL. The authentication mechanisms for SASL are specified in $smtp_authenticators defaulting to an empty list which makes mutt try all available methods from most-secure to least-secure.

## 6. Managing multiple accounts

If you happen to have accounts on multiple IMAP, POP and/or SMTP servers, you may find managing all the authentication settings inconvenient and error-prone. The account-hook command may help. This hook works like folder-hook but is invoked whenever you access a remote mailbox (including inside the folder browser), not just when you open the mailbox.

Some examples:

    account-hook . 'unset imap_user; unset imap_pass; unset tunnel'
    account-hook imap://host1/ 'set imap_user=me1 imap_pass=foo'
    account-hook imap://host2/ 'set tunnel="ssh host2 /usr/libexec/imapd"'
    account-hook smtp://user@host3/ 'set tunnel="ssh host3 /usr/libexec/smtpd"'

## 7. Local caching

Mutt contains two types of local caching: (1) the so-called ``header caching'' and (2) the so-called ``body caching'' which are both described in this section.

These are optional which means they're not enabled by default. Details on how to enable either of these techniques are given in the following subsections.

### 7.1. Header caching

Mutt provides optional support for caching message headers for the following types of folders: IMAP, POP, Maildir and MH. Header caching greatly improves speed because for remote folders, headers usually only need to be downloaded once. For Maildir and MH, reading the headers from a single file is much faster than looking at possibly thousands of single files (since Maildir and MH use one file per message.)

Header caching can be enabled via the configure script and the --enable-hcache option. It's not turned on by default because external database libraries are required: one of qdbm, gdbm or bdb must be present.

If enabled, $header_cache can be used to either point to a file or a directory. If set to point to a file, one database file for all folders will be used (which may result in lower performance), but one file per folder if it points to a directory.

For the one-file-per-folder case, database files will be named by MD5 sums. They may be safely removed if a system is short on space. You can compute the name of the header cache file for a particular folder through a command like the following:

    $ printf '%s' '/path/to/folder' | md5sum
    $ printf '%s' 'imaps://user@host/path/to/folder' | md5sum
    $ printf '%s' 'pops://user@host' | md5sum

The `md5sum` command may also be named `md5`, depending on your operating system.

### 7.2. Body caching

In addition to caching message headers only, mutt can also cache whole message bodies. This results in faster display of messages for POP and IMAP folders because messages usually have to be downloaded only once.

If the configure script is called with --enable-pop and/or --enable-imap, body caching will be built in as it does not require additional software packages such as database libraries.

For configuration, the variable $message_cachedir must point to a directory. There, mutt will create a hierarchy of subdirectories named like: `proto:user@hostname` where `proto` is either ``pop'' or ``imap.'' Within there for each folder, mutt stores messages in single files (just like Maildir) so that with manual symlink creation these cache directories can be examined with mutt as read-only Maildir folders.

All files can be removed as needed if the consumed disk space becomes an issue as mutt will silently fetch missing items again.

Prev |  | Next
Chapter 5. Mutt's MIME Support | Home | Chapter 7. Performance tuning