# Geany

## A fast, light, GTK+ IDE

Authors: | Enrico Tröger Nick Treleaven Frank Lanitz
Date: | 2008-02-04
Version: | 0.13

Copyright © 2005-2008

This document is distributed under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. A copy of this license can be found in the file COPYING included with the source code of this program, and also in the chapter GNU General Public License.

Contents

- Introduction
  - About Geany
  - Where to get it
  - License
  - About this document
- Installation
  - Requirements
  - Source compilation
  - Binary packages
- Usage
  - Getting started
  - Command line options
  - General
    - Startup
    - Opening files from the command-line in a running instance
    - Virtual terminal emulator widget (VTE)
    - Defining own widget styles using .gtkrc-2.0
  - Character sets and Unicode Byte-Order-Mark (BOM)
    - Using character sets
    - In-file encoding specification
    - Special encoding "None"
    - Unicode Byte-Order-Mark (BOM)
  - Editing
    - Folding
    - Drag and drop of text
    - Indentation
    - Auto-indentation
    - Bookmarks
    - Code Navigation History
    - Send text through definable commands
    - Context actions
    - User-definable snippets
    - Inserting unicode characters
  - Search, replace and go to
    - Find
      - Matching options
      - Find all
    - Find usage
    - Find in files
      - Filtering out version control files
    - Replace
      - Replace all
    - Go to tag definition
    - Go to tag declaration
    - Go to line
    - Regular expressions
      - Partial POSIX compatibility
  - Tags
    - Workspace tags
    - Global tags
      - Default global tags files
      - Generating a global tags file
  - Preferences
    - General tab in preferences dialog
    - Interface tab in preferences dialog
    - Toolbar tab in preferences dialog
    - Display tab in preferences dialog
    - Editor tab in preferences dialog
    - Files tab in preferences dialog
    - Tools tab in preferences dialog
    - Template tab in preferences dialog
    - Keybinding tab in preferences dialog
    - Printing tab in preferences dialog
    - VTE tab in preferences dialog
  - Project Management
    - New Project
    - Project Properties
      - Make in base path
      - Run command
    - Open Project
    - Close Project
  - Build system
    - Compile
    - Build
    - Make all
    - Make custom target
    - Make object
    - Execute
    - Stopping running processes
      - Terminal emulators
    - Set Includes and Arguments
      - One step compilation
    - Indicators
  - Printing support
  - Plugins
  - Keybindings
    - Switching documents
    - Configurable keybindings
- Configuration files
  - Global configuration file
  - Filetype definition files
    - Format
      - [styling] Section
      - [keywords] Section
      - [settings] Section
      - [build_settings] Section
    - Special file filetypes.common
  - Filetype extensions
  - Templates
    - Template metadata
    - Filetype templates
    - Customizing templates
      - Template wildcards
- Contributing to this document
- Scintilla keyboard commands
  - Keyboard commands
- Hidden preferences
- Compile-time options
- GNU General Public License
- License for Scintilla and SciTE

# Introduction

## About Geany

Geany is a small and lightweight Integrated Development Environment. It was developed to provide a small and fast IDE, which has only a few dependencies from other packages. Another goal was to be as independent as possible from a special Desktop Environment like KDE or GNOME, so Geany only requires the GTK2 toolkit and therefore you only need the GTK2 runtime libraries installed to run it.

Some basic features of Geany are:

- Syntax highlighting
- Code completion
- Auto completion of often-used constructs like "if", "for" and "while"
- Auto completion of XML and HTML tags
- Call tips
- Many supported filetypes including C, Java, PHP, HTML, Python, Perl, Pascal, and others
- Tag/Symbol lists

## Where to get it

You can obtain Geany from http://geany.uvena.de or perhaps also from your distributor.

## License

Geany is distributed under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. A copy of this license can be found in the file COPYING included with the source code of this program or in the chapter, GNU General Public License.

The included Scintilla library (found in the subdirectory `scintilla/`) has its own license, which can be found in the chapter, License for Scintilla and SciTE.

## About this document

This documentation is available in various formats like HTML, text and PDF. The latest version is always available at http://geany.uvena.de.

If you want to contribute to it, see Contributing to this document.

# Installation

## Requirements

For compiling Geany yourself, you will need the GTK (>= 2.6.0) libraries and header files. You will also need the Pango, Glib and ATK libraries and header files. All these files are available at http://www.gtk.org.

Furthermore you need, of course, a C compiler and the Make tool; a C++ compiler is also required for the included Scintilla library. The GNU versions of these tools are recommended.

## Source compilation

Compiling Geany is quite easy. The following should do it:

    % ./configure
    % make
    % make install

The configure script supports several common options, for a detailed list, type:

    % ./configure --help

There also some compile time options which can be found in `src/geany.h`. Please see Compile-time options for more information.

In the case that your system lacks dynamic linking loader support, you probably want to pass the option `--disable-vte` to the `configure` script. This prevents compiling Geany with dynamic linking loader support to automatically load `libvte.so.4` if available.

Geany has been successfully compiled and tested under Debian 3.1 Sarge, Debian 4.0 Etch, Fedora Core 3/4/5, LinuxFromScratch and FreeBSD 6.0. It also compiles under Microsoft Windows™.

If there are any errors during compilation, check your build environment and try to find the error, otherwise contact the author at <enrico(dot)troeger(at)uvena(dot)de>.

## Binary packages

There are many binary packages available. For an up to date but maybe incomplete list see http://geany.uvena.de/Download/Releases.

# Usage

## Getting started

You can start Geany in the following ways:

- From the Desktop Environment menu:

  Choose in your application menu of your used Desktop Environment: Development --> Geany.

- From the command line:

  To start Geany from a command line, type the following and press Return:

      % geany

## Command line options

Short option | Long option | Function
--- | --- | ---
none | --column | Set initial column number for the first opened file.
-c dir_name | --config=directory_name | Use an alternate configuration directory. Default configuration directory is `~/.geany/` and there resides `geany.conf` and other configuration files.
-d | --debug | Run Geany in debug mode, which means being verbose and printing lots of information.
none | --ft-names | Print a list of Geany's internal filetype names (useful for snippets configuration).
-g | --generate-tags | Generate a global tags file (see Generating a global tags file).
-P | --no-preprocessing | Don't preprocess C/C++ files when generating tags.
-i | --new-instance | Do not open files in a running instance, force opening a new instance. Only available if Geany was compiled with support for Sockets.
-l | --line | Set initial line number for the first opened file.
-m | --no-msgwin | Do not show the message window. Use this option if you do not need compiler messages or VTE support.
-n | --no-ctags | Do not load symbol completion and call tip data. Use this option if you do not want to use them.
-p | --no-plugins | Do not load plugins or plugin support.
none | --print-prefix | Print installation prefix, the data directory, the lib directory and the locale directory (in this order) to stdout, each per line. This is mainly intended for plugin authors to detect installation paths.
-s | --no-session | Do not load the previous session's files.
-t | --no-terminal | Do not load terminal support. Use this option if you do not want to load the virtual terminal emulator widget at startup. If you do not have `libvte.so.4` installed, then terminal-support is automatically disabled. Only available if Geany was compiled with support for VTE.
none | --vte-lib | Specify explicitly the path including filename or only the filename to the VTE library, e.g. `/usr/lib/libvte.so` or `libvte.so`. This option is only needed when the autodetection does not work. Only available if Geany was compiled with support for VTE.
-v | --version | Show version information and exit.
-? | --help | Show help information and exit.
none | [files ...] | Open all given files at startup. This option causes Geany to ignore loading stored files from the last session (if enabled).

Geany supports all generic GTK options, a list is available on the help screen.

## General

### Startup

At startup, Geany loads all files from the last time Geany was launched. You can disable this feature in the preferences dialog (see General tab in preferences dialog). If you specify some files on the command line, only these files will be opened, but you can find the files from the last session in the file menu under the "Recent files" item. By default this contains the last 10 recently opened files. You can change the amount of recently opened files in the preferences dialog.

You can start several instances of Geany, but only the first will load files from the last session. To run a second instance of Geany, do not specify any filenames on the command-line, or disable opening files in a running instance using the appropriate command line option.

### Opening files from the command-line in a running instance

Geany detects an already running instance of itself and opens files from the command-line in the already running instance. So, Geany can be used to view and edit files by opening them from other programs such as a file manager. If you do not like this for some reason, you can disable using the first instance by using the appropriate command line option -- see the section called Command line options.

### Virtual terminal emulator widget (VTE)

If you have installed `libvte.so` in your system, it is loaded automatically by Geany, and you will have a terminal widget in the notebook at the bottom.

If Geany cannot find any `libvte.so` at startup, the terminal widget will not be loaded. So there is no need to install the package containing this file in order to run Geany. Additionally, you can disable the use of the terminal widget by command line option, for more information see the section called Command line options.

You can use this terminal (from now on called VTE) nearly as an usual terminal program like xterm. There is basic clipboard support. You can paste the contents of the clipboard by pressing the right mouse button to open the popup menu and choosing Paste. To copy text from the VTE, just select the desired text and then press the right mouse button and choose Copy from the popup menu. On systems running the X Window System you can paste the last selected text by pressing the middle mouse button in the VTE (on 2-button mice, the middle button can often be simulated by pressing both mouse buttons together).

In the preferences dialog you can specify a shell which should be started in the VTE. To make the specified shell a login shell just use the appropriate command line options for the shell. These options should be found in the manual page of the shell. For zsh and bash you can use the argument `--login`.

Note

Geany tries to load `libvte.so`. If this fails, it tries to load some other filenames. If this fails too, you should check whether you installed libvte correctly. Again, Geany also runs without this library.

It could be, that the library is called something else than `libvte.so` (e.g. on FreeBSD 6.0 it is called `libvte.so.8`). So please set a link to the correct file (as root):

    # ln -s /usr/lib/libvte.so.X /usr/lib/libvte.so

Obviously, you have to adjust the paths and set X to the number of your `libvte.so`.

You can also specify the filename of the VTE library to use on the command line (see the section called Command line options) or at compile time by specifying the command line option `--with-vte-module-path` to ./configure.

### Defining own widget styles using .gtkrc-2.0

You can define your widget style for many of Geany's GUI parts. To do this, just edit your `.gtkrc-2.0` (usually found in your home directory on UNIX-like systems and in the etc subdirectory of your Geany installation on Windows).

To get a defined style get noticed by Geany you must it assign to one of Geany's widgets. To do so, use the following line:

    widget "Geany*" style "geany_style"

This would assign your already defined style "geany_style" to all Geany widgets. You can also assign styles only to specific widgets. At the moment you can use the following widgets:

- GeanyMainWindow
- GeanyEditMenu
- GeanyToolbarMenu
- GeanyDialog
- GeanyDialogPrefs
- GeanyDialogProject
- GeanyDialogSearch

Example of a simple `.gtkrc-2.0`:

    style "geanyStyle"
    {
        font_name="Sans 12"
    }
    widget "GeanyMainWindow" style "geanyStyle"

    style "geanyStyle"
    {
        font_name="Sans 10"
    }
    widget "GeanyPrefsDialog" style "geanyStyle"

## Character sets and Unicode Byte-Order-Mark (BOM)

### Using character sets

Geany provides support for detecting and converting character sets. So you can open and save files in different character sets and even can convert a file from a character set to another one. To do this, Geany uses the character conversion capabilities of the GLib.

Only text files are supported, i.e. opening files which contain NUL-bytes may fail. Geany will try to open the file anyway but it is likely that the file will be truncated because it can only opened up to the first occurrence of a NUL-byte. All characters after this position are lost and are not written when you save the file.

Geany tries to detect the encoding of a file while opening it. It might be that the encoding of a file cannot be detected correctly so you have to set manually the encoding of the file in order to display it correctly. You can this in the file open dialog by selecting an encoding in the drop down box or by reloading the file with the file menu item "Reload as". The auto detection works well for most encodings but there are also some encodings known where auto detection has its problems. Auto detecting the encoding of a file is not easy and sometimes an encoding might be detected not correctly.

There are different ways to use different encodings in Geany:

- Using the file open dialog

  This opens the file with the encoding specified in the encoding drop down box. If the encoding is set to "Detect from file" auto detection will be used. If the encoding is set to "Without encoding (None)" the file will be opened without any character conversion and Geany will not try to auto detect the encoding(see below for more information).

- Using the "Reload as" menu item

  This item reloads the current file with the specified encoding. It can help if you opened a file and found out that a wrong encoding was used.

- Using the "Set encoding" menu item

  In contrary to the above two options, this will not change or reload the current file unless you save it. It is useful when you want to change the encoding of the file.

- Specifying the encoding in the file itself As mentioned above, auto detecting the encoding of a file may fail on some encodings. If you know that Geany doesn't open a certain file, you can add a special line to the beginning of the file to force an encoding when opening the file (for details see below).

### In-file encoding specification

Geany detects meta tags of HTML files which contain charset information like:

    <meta http-equiv="content-type" content="text/html; charset=ISO-8859-15" />

and the found charset is used when opening the file. This is useful if the encoding of the file cannot be detected properly. For non-HTML files you can also define a line like:

    /* geany_encoding=ISO-8859-15 */

or:

    # geany_encoding=ISO-8859-15 #

to force an encoding to be used. The used #, /* and */ are only examples for filetype-specific comment characters. It doesn't matter which characters are around the string " geany_encoding=ISO-8859-15 " as long as there is at least one whitespace character before and after this string. Whitespace characters are in this case a space or tab character. "geany_encoding" must be in lower-case, the charset string is case-independent. There must not be any whitespace between "geany_encoding", the "=" sign and the charset. An example to use this could be you have a file with ISO-8859-15 encoding but Geany constantly detects the file encoding as ISO-8859-1. Then you simply add such a line to the file and Geany will open it correctly the next time.

Note

These specifications must be in the first 512 bytes of the file. Anything after the first 512 bytes will not be recognised.

### Special encoding "None"

There is a special encoding "None" which is actually no real encoding. It is useful when you know that Geany cannot auto detect the encoding of a file and it is not displayed correctly. Especially when the file contains NUL-bytes this can be useful to skip auto detection and open the file properly at least until the occurrence of the first NUL-byte. Using this encoding opens the file as it is without any character conversion.

### Unicode Byte-Order-Mark (BOM)

Furthermore, Geany detects an Unicode Byte Order Mark (see http://en.wikipedia.org/wiki/Byte_Order_Mark for details). Of course, this feature is only available if the opened file is in an unicode encoding. The Byte Order Mark helps to detect the encoding of a file, e.g. whether it is UTF-16LE or UTF-16BE and so on. On Unix-like systems using a Byte Order Mark could cause some problems, e.g. the gcc stops with stray errors, PHP does not parse a script containing a BOM and script files starting with a she-bang maybe cannot be started. In the status bar you can easily see whether the file starts with a BOM or not. If you want to set a BOM for a file or if you want to remove it from a file, just use the document menu and toggle the checkbox.

Note

If you are unsure what a BOM is or if you do not understand where to use it, then it is probably not important for you and you can safely ignore it.

## Editing

### Folding

Geany provides basic code folding support. Folding means the ability to show and hide parts of the text in the current file. You can hide unimportant code sections and concentrate on the parts you are working on and later you can show these sections again. In the editor window there is a small grey margin on the left side with some [+] and [-] symbols. By clicking on these icons you can simply show and hide sections which are marked by vertical lines within this margin. For many filetypes nested folding is supported, so there may be several fold points within other fold points.

If you don't like it or don't need it at all, you can simply disable folding support completely in the preferences dialog.

The folding behaviour can be changed with the "Fold/Unfold all children of a fold point" option in the preference dialog. If activated, Geany will unfold all nested fold points below the current one if they are already folded (when clicking on a [+] symbol). When clicking on a [-] symbol, Geany will fold all nested fold points below the current one if they are unfolded.

The usage of this option can be instantly inverted by pressing the Shift key while clicking on a fold symbol. That means, if the "Fold/Unfold all children of a fold point" option is enabled, pressing Shift will disable it for this click and vice versa.

### Drag and drop of text

If you drag selected text in the editor widget of Geany the text is moved to the position where the mouse pointer is when releasing the mouse button. Holding Control when releasing the mouse button will copy the text instead. This behaviour was changed in Geany 0.11 - before the selected text was copied to the new position.

### Indentation

Geany allows each document to indent either with a tab character or multiple spaces. The default indent mode is set in the Editor tab in preferences dialog. But this can be overridden using either the Document->Indent Type menu, or by using the Detect from file indentation preference. When enabled, this scans each file that is opened and sets the indent mode based on how many lines start with a tab vs. 2 or more spaces.

The indent mode for the current document is shown on the status bar as follows:

TAB
  Indent with Tab characters.
SP
  Indent with spaces.

### Auto-indentation

When enabled, auto-indentation happens when pressing Enter in the Editor. It adds a certain amount of indentation to the new line so the user doesn't always have to indent each line manually.

Geany knows four types of auto-indentation:

None
  Disables auto-indentation completely.
Basic
  Adds the same amount of whitespace on a new line as on the last line.
Current chars
  Does the same as Basic but also indents a new line after an opening brace '{', and de-indents when typing a closing brace '}'. For Python, a new line will be indented after typing ':' at the end of the previous line.
Match braces
  Similar to Current chars but the closing brace will be aligned to match the indentation of the line with the opening brace.

### Bookmarks

Geany provides a handy bookmarking feature that lets you mark one or more lines in a document, and return the cursor to them using a key combination.

To place a mark on a line, either left-mouse-click in the left margin of the editor window, or else use Ctrl-m. Either way, this will produce a small green plus symbol in the margin. You can have as many marks in a document as you like. Click again (or use Ctrl-m again) to remove the bookmark. To remove all the marks in a given document, use "Remove Markers" in the Document menu.

To navigate down your document, jumping from one mark to the next, use Ctrl-. (control period). To go in the opposite direction on the page, use Ctrl-, (control comma). Using the bookmarking feature together with the commands to switch from one editor tab to another (Ctrl-PgUp/PgDn and Ctrl-Tab) provides a particularly fast way to navigate around multiple files.

### Code Navigation History

To ease navigation in source files and especially between different files, Geany lets you jump between different navigation points. Currently, this works when using the Go to tag declaration, Go to tag definition commands and when clicking on symbol list items.

When using one of these actions, Geany remembers your current position and jumps to the new one. If you decide to go back to your previous position in the file, just use "Navigate back a location". To get back to the new position again, just use "Navigate forward a location". This makes it easier to navigate in e.g. foreign code and between different files.

### Send text through definable commands

You can define several custom commands in Geany and send the current selection to one of these commands. The output of the command will be used to replace the current selection. So, it is possible to use text formatting tools with Geany in a general way. The selected text will be sent to the standard input of the executed command, so the command should be able to read from it and it should print all results to its standard output which will be read by Geany. To help finding errors in executing the command, the output of the program's standard error will be printed on Geany's standard output.

To add a custom command, just go to the Set Custom Commands dialog in the Format sub menu of the Edit and Popup menu. Then click on Add to get a new text entry and type the command. You can also specify some command line options. To delete a command, just clear the text entry and press Ok. It will be deleted automatically.

### Context actions

You can execute a specified command on the current word near the cursor position or an available selection and this word is passed as an argument to this command. It can be used for example to open some API documentation in a browser window or open any other external program. To do this, there is an menu entry in the popup menu of the editor widget and also a keyboard shortcut(see the section called Keybindings).

The command can be specified in the preferences dialog and additionally for each filetype (see "context_action_cmd" in the section called Format). At executing, the filetype specific command is used if available otherwise the command specified in the preferences dialog is executed.

The passed word can be referred with the wildcard "%s" everywhere in the command, before executing it will be replaced by the current word. For example, the command to open the PHP API documentation would be:

    firefox "http://www.php.net/%s"

when executing the command, the %s is substituted by the word near the cursor position or by the current selection. If the cursor is at the word "echo", a browser window will open(assumed your browser is called firefox) and it will open the address: http://www.php.net/echo.

### User-definable snippets

Snippets are small strings or code constructs which can be replaced or completed to a more complex string. So you can save a lot of time by not typing often used strings and letting Geany do the work for you. To know what to complete or replace Geany reads a configuration file called `snippets.conf` at startup.

The system-wide configuration file can be found in `$prefix/share/geany`, where `$prefix` is the path where Geany is installed (commonly `/usr/local`). It is not recommended to edit the system-wide file, because it will be overridden when Geany is updated.

To change the settings, copy the file from `$prefix/share/geany` in your configuration directory (usually `~/.geany/`).

For example:

    % cp /usr/local/share/geany/snippets.conf /home/username/.geany/

Then you can edit the file and the changes are also available after an update of Geany because the file resides in your configuration directory. Alternatively, you can create a file `~/.geany/snippets.conf` and add only these settings you want to change. All missing settings will be read from the global snippets file in `$prefix/share/geany`.

The file `snippets.conf` may contain several sections for each filetype. It also contains two additional sections "Default" and "Special". Default contains all snippets which are available for every filetype. You may define another section for a certain filetype(e.g. C++) containing the same snippets. Then when using such a snippet in a C++ file the snippet defined in the C++ section will be used. In any other file the snippet defined in the Default section will be used unless a section for the current filetype exists and the used snippet is defined in this section. The section "Special" contains special snippets which can only be used in other snippets. So you can define often used parts of snippets and just use the special snippet as a placeholder (see the `snippets.conf` for details).

To define snippets you can use several special characters which will be replaced when using the snippet:

Wildcards for snippets

\n or %newline% | Insert a new line (it will be replaced by the used EOL char(s): LF, CR/LF, or CR).
\t or %ws% | Insert an indentation step, if using only spaces for indentation only spaces will be used.
\s | \s to force whitespace at beginning or end of a value ('key= value' won't work, use 'key=\svalue')
%cursor% | Place the cursor at this position after completion has been done.
%...% | "..." means the name of a key in the "Special" section. If you have defined a key "brace_open" in the "Special" section you can use %brace_open" in any other snippet.

Defined snippets must not contain spaces otherwise they won't work correctly. But beside that you can define almost everything string as a snippet and use it later in Geany. It is not limited to existing contructs of certain programming languages(like `if`, `for`, `switch`). Define whatever you need.

Maybe you need to often type your name, so define a snippet like this:

    [Default]
    myname=Enrico Tröger

Everytime you write `myname` <TAB> in Geany, it will replace "myname" with "Enrico Tröger". The key to start auto completion can be changed in the preferences dialog, by default it is TAB.

You may change the behaviour Geany recognizes the word to complete, i.e. where define the start and end of a word. The section "Special" may contain a key "wordchars" which lists all characters a string may contain to be recognized as a word for completion. Leave it commented to use default characters or define it to add or remove characters to fit your needs.

### Inserting unicode characters

With GTK 2.10 and above, you can hit Ctrl-Shift-u, then still holding Ctrl-Shift, type some hex digits representing the code point for the character you want, then let go of Ctrl-Shift and hit a key such as the right arrow.

For this to work in Geany, you'll need to first unbind Ctrl-Shift-u in the keybinding tab in preferences dialog, then restart Geany. Note that it works slightly differently from other GTK applications, in that you'll need to continue to hold down the Ctrl and Shift keys while typing the code point hex digits.

For GTK < 2.10, it is also possible, but typing the first Ctrl-Shift-u is not necessary. One problem is that you may find the alphabetic keys conflict with other Geany keybindings.

## Search, replace and go to

This section describes search-related commands from the Search menu and the editor window's popup menu:

- Find
- Find usage *
- Find in files
- Replace
- Go to tag definition *
- Go to tag declaration *
- Go to line

* These items are available from the editor window's popup menu, or by using a keyboard shortcut (see the section called Keybindings).

### Find

The Find dialog is used for finding text in one or more open documents.

#### Matching options

The syntax for the Use regular expressions option is shown in Regular expressions.

The Use escape sequences option will transform any escaped characters into their UTF-8 equivalent. For example, \t will be transformed into a tab character. Other recognised symbols are: \\, \n, \r, \uXXXX (Unicode chararacters).

#### Find all

To find all matches, click on the Find All expander. This will reveal several options:

- In Document
- In Session
- Mark

Find All In Document will show a list of matching lines in the current document in the Messages tab of the Message Window. Find All In Session does the same for all open documents.

Mark will set markers for all matching lines in the current document, if the Markers margin is visible. If not, the background colour of matching lines will be highlighted. Markers and highlighting can be removed by selecting the Remove Markers command from the Document menu.

### Find usage

Find usage searches all open files. It is similar to the Find All In Session Find dialog command.

If there is a selection, then it is used as the search text; otherwise the current word is used. The current word is either taken from the word nearest the edit cursor, or the word underneath the popup menu click position when the popup menu is used. The search results are shown in the Messages tab of the Message Window.

### Find in files

Find in files is a more powerful version of Find usage that searches all files in a certain directory using the Grep tool. The Grep tool must be correctly set in Preferences to the path of the system's Grep utility. GNU Grep is recommended.

The Extra options field is used to pass any additional arguments to the grep tool.

#### Filtering out version control files

When using the Recurse in subfolders option with a directory that's under version control, you can set the Extra options field to use grep's `--exclude` flag to filter out filenames.

SVN Example: `--exclude=*.svn-base`

Note

The GNU Grep project added support for excluding directories, using the --exclude-dir flag. At the time of writing (April 2007) this is unreleased outside of version control. Check your Grep manual to see if your version supports it.

CVS Example: `--exclude-dir=.* --exclude-dir=CVS`

### Replace

The Replace dialog is used for replacing text in one or more open documents.

The Replace dialog has the same options for matching text as the Find dialog. See the section called Matching options.

The Use regular expressions option applies both to the search string and to the replacement text; for the latter back references can be used -- see the entry for '\n' in Regular expressions.

#### Replace all

To replace several matches, click on the Replace All expander. This will reveal several options:

- In Document
- In Session
- In Selection

Replace All In Document will replace all matching text in the current document. Replace All In Session does the same for all open documents. Replace All In Selection will replace all matching text in the current selection of the current document.

### Go to tag definition

If the current word is the name of a tag definition (like a function body) and the file containing the tag definition is open, this command will switch to that file and go to the corresponding line number. The current word is either taken from the word nearest the edit cursor, or the word underneath the popup menu click position when the popup menu is used.

### Go to tag declaration

Like Go to tag definition, but for a forward declaration such as a function prototype or `extern` declaration instead of a function body.

### Go to line

Go to a particular line number in the current file.

### Regular expressions

You can use regular expressions in the Find and Replace dialogs by selecting the Use regular expressions check box. The syntax is POSIX-like, as described below in Regular expressions.

Note

Searching backwards with regular expressions is not supported.

In a regular expression, the following characters are interpreted:

. | Matches any character.
( | This marks the start of a region for tagging a match.
) | This marks the end of a tagged region.
\n | Where n is 1 through 9 refers to the first through ninth tagged region when replacing. For example, if the search string was Fred([1-9])XXX and the replace string was Sam\1YYY, when applied to Fred2XXX this would generate Sam2YYY.
\< | This matches the start of a word.
\> | This matches the end of a word.
\x | This allows you to use a character x that would otherwise have a special meaning. For example, \[ would be interpreted as [ and not as the start of a character set. Use \\ for a literal backslash.
[...] | This indicates a set of characters, for example, [abc] means any of the characters a, b or c. You can also use ranges, for example [a-z] for any lower case character.
[^...] | The complement of the characters in the set. For example, [^A-Za-z] means any character except an alphabetic character.
^ | This matches the start of a line (unless used inside a set, see above).
$ | This matches the end of a line.
* | This matches 0 or more times. For example, Sa*m matches Sm, Sam, Saam, Saaam and so on.
+ | This matches 1 or more times. For example, Sa+m matches Sam, Saam, Saaam and so on.

#### Partial POSIX compatibility

Note that the POSIX '?' regular expression character for optional matching is not supported by the Find and Replace dialogs.

## Tags

Geany has built-in functionality for generating tag information (aka "workspace tags") for supported filetypes when you open a file. You can also have Geany automatically load external tag files (aka "global tags files") from its `~/.geany/tags` directory upon startup, or manually using File --> Load Tags.

Geany uses its own tag file format, similar to what `ctags` uses (but is incompatible with ctags). You use Geany to generate global tags files, as described below.

### Workspace tags

Tags for each document are parsed whenever a file is loaded or saved. These are shown in the Symbol list in the Sidebar. These tags are also used for autocompletion of symbols and calltips for all documents open in the current session that have the same filetype.

The Go to Tag commands can be used with all workspace tags. See Go to tag definition.

### Global tags

Global tags are used to provide autocompletion of symbols and calltips without having to open the corresponding source files. This is intended for library APIs, as the tags file only has to be updated when you upgrade the library.

You can load a custom global tags file in two ways:

- Using the Load Tags command in the File menu.
- By creating a directory `~/.geany/tags`, and moving or symlinking the tags files there before starting Geany.

You can either download these files or generate your own. They have the format:

    name.lang_ext.tags

lang_ext is one of the extensions set for the filetype associated with the tags. See the section called Filetype extensions for more information.

#### Default global tags files

For some languages, a list of global tags is loaded when the corresponding filetype is first used. Currently these are for:

- C -- GTK+ and GLib
- Pascal
- PHP
- HTML -- &symbol; completion, e.g. for ampersand, copyright, etc.
- LaTeX

#### Generating a global tags file

Filetypes support:

Currently this is not yet supported for Pascal, PHP and LaTeX filetypes.

You can generate your own global tags files by parsing a list of source files. The command is:

    geany -g [-P] <Tag File> <File list>

- Tag File should be in the format described earlier -- see the section called Global tags.
- File list is a list of filenames, each with a full path (unless you are generating C/C++ tags and have set the CFLAGS environment variable appropriately).
- `-P` or `--no-preprocessing` disables using the C pre-processor to process `#include` directives for C/C++ source files. Use this option if you want to specify each source file on the command-line instead of using a 'master' header file. Also can be useful if you don't want to specify the CFLAGS environment variable.

Example for the wxD library for the D programming language:

    geany -g wxd.d.tags /home/username/wxd/wx/*.d

Generating C/C++ tag files:

For C/C++ tag files, gcc and grep are required, so that header files can be preprocessed to include any other headers they depend upon.

For C/C++ files, the environment variable CFLAGS should be set with appropriate `-I/path` include paths. The following example works with the bash shell, generating tags for the GnomeUI library:

    CFLAGS=`pkg-config --cflags libgnomeui-2.0` geany -g gnomeui.c.tags \
    /usr/include/libgnomeui-2.0/gnome.h

You can adapt this command to use CFLAGS and header files appropriate for whichever libraries you want.

Replacing the default C/C++ tags file:

Geany currently uses a default global tags file global.tags for C and C++, commonly installed in /usr/share/geany. This file can be replaced with one containing tags parsed from a different set of header files. When Geany is next started, your custom tags file will be loaded instead of the default global.tags. You should keep a copy of the generated tags file because it will get overwritten when upgrading Geany.

## Preferences

You may adjust Geany's settings using the Edit --> Preferences dialog. Any changes you make there can be applied by hitting either the Apply or the Ok button. These settings will persist between Geany sessions. Note that most settings here have descriptive popup bubble help -- just hover the mouse over the item in question to get help on it.

You may also adjust some View settings (under the View menu) that persist between Geany sessions. The settings under the Document menu, however, are only for the current document and revert to defaults when restarting Geany.

There are also some rarer Hidden preferences.

Note

In the paragraphs that follow, the text describing a dialog tab (if present) comes after the screenshot of that tab.

### General tab in preferences dialog

General tab in preferences dialog

### Interface tab in preferences dialog

Interface tab in preferences dialog

The documents list and the editor tabs are two different ways to switch between documents using the mouse. When you hit the key combination to move between tabs, the order is determined by the tab order, not alphabetical as shown in the documents list (regardless whether or not editor tabs are visible).

### Toolbar tab in preferences dialog

Toolbar tab in preferences dialog

### Display tab in preferences dialog

This is for visual elements displayed in the editor window.

### Editor tab in preferences dialog

Editor tab in preferences dialog

Line wrapping refers to the display of the text in the editor. (Currently, there is no setting to have Geany automatically insert newlines into your document while you type.)

### Files tab in preferences dialog

Files tab in preferences dialog

### Tools tab in preferences dialog

Tools tab in preferences dialog

### Template tab in preferences dialog

Template tab in preferences dialog

### Keybinding tab in preferences dialog

Keybinding tab in preferences dialog

There are some handy commands in here that are not, by default, bound to a key combination, and may not be available as a menu item.

Note

For more information see the section called Keybindings.

### Printing tab in preferences dialog

Printing tab in preferences dialog

### VTE tab in preferences dialog

VTE tab in preferences dialog

## Project Management

Project Management is optional in Geany. Currently it can be used for:

- Storing and opening session files on a project basis.
- Running Make from the project's base directory.
- Setting a custom Run command specific to the project.

A list of session files can be stored and opened with the project when the Use project-based session files preference is enabled, in the Project group of the Preferences dialog.

As long as a project is open, the Make and Run commands will use the project's settings, instead of the defaults. These will be used whichever document is currently displayed.

The current project's settings are saved when it is closed, or when Geany is shutdown. When restarting Geany, the previously opened project file that was in use at the end of the last session will be reopened.

Below are the commands used to create, modify, open and close projects.

### New Project

To create a new project, fill in the Name field. By default this will setup a new project file `~/projects/name.geany`. Usually it's best to store all your project files in the same directory (they are independent of any source directory trees).

The Base path text field is setup to use `~/projects/name`. This can safely be set to any existing path -- it will not touch the file structure contained in it.

### Project Properties

You can set an optional description for the project, but it is not used elsewhere by Geany.

The Base path field is used as the directory to run the Make and Make custom commands in. It is also used as working directory for the project specific Run command. The specified path can be an absolute path or relative to the project's file name.

#### Make in base path

This setting makes the Build->Make command use the project's base path. Uncheck this if you want to use the current file's directory instead.

#### Run command

The Run command overrides the default run command. You can set this to the executable or main script file for the project, and append any command-line arguments.

The following variables can be used:

- %f -- complete filename without path
- %e -- filename without path and without extension

See [build_settings] Section for details.

### Open Project

The Open command displays a standard file chooser, starting in `~/projects`. Choose a project file named with the `.geany` extension.

When project session support is enabled, Geany will close the currently open files and open the session files associated with the project.

### Close Project

Project file settings are saved when the project is closed.

When project session support is enabled, Geany will close the project session files and open any previously closed default session files.

## Build system

Geany has an integrated build system. Firstly this means that the current source file will be saved before it is processed. This is for convenience so that you don't need to keep saving small changes to the current file before building.

Secondly the output for Compile, Build and Make actions will be captured in the Compiler notebook tab of the messages window (assuming you have it visible). If there are any warnings or errors with line numbers shown in the Compiler output tab, you can double click on them and Geany will switch to the relevant source file (if it is open) and mark the line number so the problem can be corrected. Geany will also set indicators for warnings or errors with line numbers.

Depending on the current file's filetype, the Build menu will contain the following items:

- Compile
- Build
- Make all
- Make custom target
- Make object
- Execute
- Set Includes and Arguments

### Compile

The Compile command has different uses for different kinds of files.

For compilable languages such as C and C++, the Compile command is setup to compile the current source file into a binary object file.

Java source files will be compiled to class file bytecode. Interpreted languages such as Perl, Python, Ruby will compile to bytecode if the language supports it, or will run a syntax check, or failing that will run the file in its language interpreter.

### Build

For compilable languages such as C and C++, the Build command will link the current source file's equivalent object file into an executable. If the object file does not exist, the source will be compiled and linked in one step, producing just the executable binary.

Interpreted languages do not use the Build command.

### Make all

This effectively runs "make all" in the same directory as the current file.

Note

For each of the Make commands, The Make tool path must be correctly set in the Tools tab of the Preferences dialog.

### Make custom target

This is similar to running 'Make all' but you will be prompted for the make target name to be passed to the Make tool. For example, typing 'clean' in the dialog prompt will run "make clean".

### Make object

Make object will run "make current_file.o" in the same directory as the current file, using its prefix for 'current_file'. It is useful for compiling just the current file without building the whole project.

### Execute

Execute will run the corresponding executable file, shell script or interpreted script in a terminal window. Note that the Terminal tool path must be correctly set in the Tools tab of the Preferences dialog - you can use any terminal program that runs a Bourne compatible shell and accept the "-e" command line argument to start a command.

After your program or script has finished executing, you will be prompted to press the return key. This allows you to review any text output from the program before the terminal window is closed.

### Stopping running processes

When there is a running program, the Run button in the toolbar becomes a stop button and you can stop the current action. This works by sending a signal to the process (and its child process(es)) to stop the process. The used signal is SIGQUIT.

Depending on the process you started it might occur that the process cannot be stopped. This can happen when the process creates more than one child process.

#### Terminal emulators

Xterm is known to work properly. If you are using "Terminal" (the terminal program of Xfce), you should add the command line option `--disable-server` otherwise the started process cannot be stopped. Just add this option in the preferences dialog on the Tools tab in the terminal field.

### Set Includes and Arguments

By default the Compile and Build commands invoke the compiler and linker with only the basic arguments needed by all programs. Using Set Includes and Arguments you can add any include paths and compile flags for the compiler, any library names and paths for the linker, and any arguments you want to use when running Execute.

These settings are saved automatically when Geany is shut down.

The following variables can be used:

- %f -- complete filename without path
- %e -- filename without path and without extension

See [build_settings] Section for details.

If you need complex settings for your build system, or several different settings, then writing a Makefile and using the Make commands is recommended.

#### One step compilation

If you are using the Build command to compile and link in one step, you will need to set both the compiler arguments and the linker arguments in the linker command setting.

### Indicators

Indicators are red squiggly underlines which are used to highlight errors which occured while compiling the current file. So you can easily see where your code failed to compile. To remove the indicators, just click on "Remove all indicators" in the document file menu.

If you do not like this feature, you can disable it in the preferences dialog.

## Printing support

Since Geany 0.13 there is full printing support using GTK's printing API. The printed page(s) will look nearly the same as on your screen in Geany. Additionally, there are some options to modify the printed page(s). You can define whether to print line numbers, page numbers at the bottom of each page and whether to print a page header on each page. This header contains the filename of the printed document, the current page number and the date and time of printing. By default, the file name of the document is added with full path information to the header. If you prefer to add only the basename of the file(without any path information) you can set it in the preferences dialog. You can also adjust the format of the date and time added to the page header. The available conversion specifiers are the same as the ones which can be used with the ANSI C strftime function. All of these settings can also be changed in the print dialog just before actual printing is done. On Unix-like systems the provided print dialog offers a print preview. The preview file is opened with a PDF viewer and by default GTK uses `evince` for print preview. If you don't have installed evince or just want to use another PDF viewer, you can change the program to use in the file `.gtkrc-2.0` (usually found in your home directory). Simply add a line like:

    gtk-print-preview-command = "epdfview %f"

at the end of the file. Of course, you can also use xpdf, kpdf or whatever as the print preview command.

Unfortunately, native GTK printing support is only available if Geany was built against GTK 2.10 (or above) and is running with GTK 2.10 (or above). If not, Geany provides basic printing support. This means you can print a file by passing the filename of the current file to a command which actually prints the file. However, the printed document contains no syntax highlighting. You can adjust the command to which the filename is passed in the preferences dialog. The default command is:

    % lpr %f

`%f` will be substituted by the filename of the current file. Geany will not show errors from the command itself, so you should make sure that it works before(e.g. by trying to execute it from the command line).

A nicer example, which I prefer is:

    % a2ps -1 --medium=A4 -o - %f | xfprint4

But this depends on a2ps and xfprint4. As a replacement for xfprint4, gtklp or similar programs can be used.

## Plugins

Plugins are loaded at startup, if the Enable plugin support general preference is set. There is also a command-line option, `-p`, which prevents plugins being loaded. Plugins are scanned in the following directories:

- `$prefix/lib/geany` (`$prefix` is usually `/usr/local` or `/usr`)
- `~/.geany/plugins`

Most plugins add menu items to the Tools menu when they are loaded.

Since Geany 0.13, there is a Plugin Manager to let you choose which plugins should be loaded at startup. You can also load and unload plugins on the fly using this dialog. Once you click the checkbox for a specific plugin in the dialog, it is loaded or unloaded according to its previous state. By default, no plugins are loaded at startup until you select some. You can also configure some plugin specific options when the plugin provides some.

## Keybindings

Geany supports the default keyboard shortcuts for the Scintilla editing widget. For a list of these commands, see Scintilla keyboard commands. The Scintilla keyboard shortcuts will be overridden by any custom keybindings with the same keyboard shortcut.

### Switching documents

There are a few non-configurable bindings to switch between documents, listed below. These can also be overridden by custom keybindings.

Key | Action
--- | ---
Alt-[1-9] | Select left-most tab, from 1 to 9.
Alt-0 | Select right-most tab.
Ctrl-Shift-PgUp | Select left-most tab.
Ctrl-Shift-PgDn | Select right-most tab.

### Configurable keybindings

For all actions listed below you can define your own keybindings. Open the Preferences dialog, select the desired action and click on change. In the opening dialog you can press any key combination you want and it will be saved when you press OK. You can define only one key combination for one action.

Some of the default key combinations cannot be changed, e.g. menu_new or menu_open. These are set by GTK and should be kept, but you can still add other key combinations for these actions. For example to execute menu_open by default Ctrl-O is set, but you can also define Alt-O, so that the file open dialog is shown by pressing either Ctrl-O or Alt-O.

The following table lists all customizable keyboard shortcuts.

Action | Default shortcut | Description
--- | --- | ---
File menu |  |
New | Ctrl-N | Creates a new file.
Open | Ctrl-O | Opens a file.
Save | Ctrl-S | Saves the current file.
Save As |  | Saves the current file under a new name.
Save all | Ctrl-Shift-S | Saves all open files.
Close all | Ctrl-Shift-W | Closes all open files.
Close | Ctrl-W | Closes the current file.
Reload file | Ctrl-R | Reloads the current file. All unsaved changes will be lost.
Print | Ctrl-P | Prints the current file.
Edit menu |  |
Undo | Ctrl-Z | Un-does the last action.
Redo | Ctrl-Y | Re-does the last action.
Cut | Ctrl-X | Cut the current selection to the clipboard.
Copy | Ctrl-C | Copy the current selection to the clipboard.
Paste | Ctrl-V | Paste the clipboard text into the current document.
Select all | Ctrl-A | Makes a selection of all text in the current document.
Insert date | Shift-Alt-D | Inserts a customisable date.
Preferences | Ctrl-Alt-P | Opens preferences dialog.
Search menu |  |
Find | Ctrl-F | Opens the Find dialog.
Find Next | Ctrl-G | Finds next result.
Find Previous | Ctrl-Shift-G | Finds previous result.
Replace | Ctrl-H | Opens the Replace dialog.
Find in files | Ctrl-Shift-F | Opens the Find in files dialog.
Next message |  | Jumps to the line with the next message from the last call to Find usage.
Go to line | Ctrl-L | Opens the Go to line dialog.
View menu |  |
Fullscreen | F11 | Switches to fullscreen mode.
Toggle Messages Window |  | Toggles the message window (status and compiler messages) on and off.
Toggle Sidebar |  | Shows or hides the sidebar.
Toggle all additional widgets |  | Hide and show all additional widgets like the notebook tabs, the toolbar, the messages window and the statusbar.
Document menu |  |
Zoom In | Ctrl-+ | Zooms in the text
Zoom Out | Ctrl-- | Zooms out the text
Replace tabs by space |  | Replaces all tabs with the right amount of spaces.
Fold all |  | Folds all contractible code blocks.
Unfold all |  | Unfolds all contracted code blocks.
Build menu |  |
Compile | F8 | Compiles the current file.
Build | F9 | Builds (compiles if necessary and links) the current file.
Make all | Shift-F9 | Builds the current file with the Make tool.
Make custom target | Ctrl-Shift-F9 | Builds the current file with the Make tool and a given target.
Make object |  | Compiles the current file with the Make tool.
Next error |  | Jumps to the line with the next error from the last build process.
Run | F5 | Executes the current file in a terminal emulation.
Run (alternative command) |  | Executes the current file in a terminal emulation.
Build options |  | Opens the build options dialog.
Tools menu |  |
Show Color Chooser |  | Opens the Colour Chooser dialog.
Help menu |  |
Help | F1 | Opens the manual.
Miscellaneous |  |
Reload symbol list | Ctrl-Shift-R | Reloads the tag/symbol list.
Switch to Editor | F2 | Switches to editor widget.
Switch to Scribble | F6 | Switches to scribble widget.
Switch to VTE | F4 | Switches to VTE widget.
Switch to Search Bar | F7 | Switches to the search bar in the toolbar (if visible).
Switch to left document | Ctrl-PageUp | Switches to the previous open document.
Switch to right document | Ctrl-PageDown | Switches to the next open document.
Switch to last used document | Ctrl-Tab | Switches to the previously selected open document.
Move document left | Alt-PageUp | Changes the current document with the left hand one.
Move document right | Alt-PageDown | Changes the current document with the right hand one.
Move document first |  | Moves the current document to the first position.
Move document last |  | Moves the current document to the last position.
Navigate forward a location |  | Switches to the next location in the navigation history. See the section called Code Navigation History.
Navigate back a location |  | Switches to the previous location in the navigation history. See the section called Code Navigation History.
Editing operations |  |
Toggle case of selection | Ctrl-Alt-U | Changes the case of the selection. A lowercase selection will be changed into uppercase and vice versa. If the selection contains lower- and uppercase characters, all will be converted to lowercase.
Duplicate line or selection | Ctrl-D | Duplicates the current line or selection.
Delete current line(s) | Ctrl-K | Deletes the current line (and any lines with a selection).
Cut current line(s) | Ctrl-Shift-X | Cuts the current line (and any lines with a selection) to the clipboard.
Copy current line(s) | Ctrl-Shift-C | Copies the current line (and any lines with a selection) to the clipboard.
Transpose current line | Ctrl-T | Transposes the current line with the previous one.
Comment line |  | Comments current line or selection.
Uncomment line |  | Uncomments current line or selection.
Toggle line commentation | Ctrl-E | Comments a line if it is not commented or removes a comment if the line is commented.
Increase indent | Ctrl-I | Indents the current line or selection by one tab or by spaces in the amount of the tab width setting.
Decrease indent | Ctrl-U | Removes one tabulator or the amount fo spaces of the tab width setting from the indentation of the current line or selection.
Increase indent by one space |  | Indents the current line or selection by one space.
Decrease indent by one space |  | Deindents the current line or selection by one space.
Smart line indent |  | Indents the current line or all selected lines with the same intentation as the previous line.
Goto matching brace | Ctrl-B | If the cursor is ahead or behind a brace, then it is moved to the brace which belongs to the current one. If this keyboard shortcut is pressed again, the cursor is moved back to the first brace.
Toggle marker | Ctrl-M | Set a marker on the current line, or clear the marker if there already is one.
Goto next marker | Ctrl-. | Goto the next marker in the current document.
Goto previous marker | Ctrl-, | Goto the previous marker in the current document.
Complete word | Ctrl-Space | Shows auto completion list.
Show calltip | Alt-Space (Unix) Alt-Shift-Space (Windows) | Shows call tips for the current function or method.
Show macro list | Ctrl-Return | Shows a list of available macros and variables in the workspace.
Complete snippet | Tab | If you type a construct like if or for and press this key, it will be completed with a matching template.
Suppress snippet completion |  | If you type a construct like if or for and press this key, it will not be completed, and a space or tab will be inserted, depending on what the construct completion keybinding is set to. For example, if you have set the construct completion keybinding to space, then setting this to Shift+space will prevent construct completion and insert a space.
Select current word | Alt-Shift-W | Selects the current word under the cursor.
Select current paragraph | Alt-Shift-P | Selects the current paragraph under the cursor which is defined by two empty lines around it.
Select current line(s) | Alt-Shift-L | Selects the current line under the cursor (and any partially selected lines).
Scroll to current line | Ctrl-Shift-L | Scrolls the current line into the centre of the view. The cursor position and or an existing selection will not be changed.
Insert alternative whitespace |  | Inserts a tabulator character when spaces should be used for indentation and inserts space characters of the amount of a tabulator width when tabulators should be used for indentation.
Popup menu |  |
Find Usage |  | Finds all occurrences of the current word (near the keyboard cursor) or selection and displays them in the messages window.
Go to tag definition |  | Jump to the definition of the current word (near the keyboard cursor). If the definition cannot be found (e.g. the relevant file is not open) Geany will beep and do nothing. See the section called Go to tag definition.
Go to tag declaration |  | Jump to the declaration of the current word (near the keyboard cursor). If the declaration cannot be found (e.g. the relevant file is not open) Geany will beep and do nothing. See the section called Go to tag declaration.
Context Action |  | Executes a command and passes the current word (near the cursor postion) or selection as an argument. See the section called Context actions.

# Configuration files

## Global configuration file

You can use a global configuration file for Geany which will be used if the user starts Geany for the first time and an user's configuration file was not yet created or in case an user deleted the configuration file to use default values.

The global configuration file is read from `$prefix/share/geany/geany.conf` (where `$prefix` is the path where Geany is installed) when starting Geany and an user configuration file does not exist. It can contain any settings which are found in the usual configuration file created by Geany but does not have to contain all settings.

Note

This feature is mainly intended for package maintainers or system admins who want to set up Geany in a multi user environment and set some sane default values for this environment. Usual users won't need to do that.

## Filetype definition files

All colour definitions and other filetype specific settings are stored in the filetype definition files. Those settings are colours for syntax highlighting, general settings like comment characters or word delimiter characters as well as compiler and linker settings.

The system-wide configuration files can be found in `$prefix/share/geany` and are called `filetypes.$ext`, where `$prefix` is the path where Geany is installed (commonly `/usr/local`) and $ext is the name of the filetype. For every filetype there is a corresponding definition file. There is one exception: `filetypes.common` -- this file is for general settings, which are not specific to a certain filetype. It is not recommended to edit the system-wide files, because they will be overridden when Geany is updated.

To change the settings, copy a file from `$prefix/share/geany` to the subdirectory filedefs in your configuration directory (usually `~/.geany/`).

For example:

    % cp /usr/local/share/geany/filetypes.c /home/username/.geany/filedefs/

Then you can edit the file and the changes are also available after an update of Geany because they reside in your configuration directory. Alternatively, you can create a file `~/.geany/filedefs/filetypes.X` and add only these settings you want to change. All missing settings will be read from the corresponding global definition file in `$prefix/share/geany`.

### Format

#### [styling] Section

In this section the colours for syntax highlighting are defined. The format is always: key=forground_colour;background_colour;bold;italic

Colours have to be specified as RGB hex values prefixed by 0x. For example red is 0xff0000, blue is 0x0000ff. The values are case-insensitive, but it is a good idea to use small letters. Bold and italic are flags and should only be "true" or "false". If their value is something other than "true" or "false", "false" is assumed.

#### [keywords] Section

This section contains keys for different keyword lists specific to the filetype. Some filetypes do not support keywords, so adding a new key will not work. You can only add or remove keywords to/from an existing list.

Important

The keywords list must be in one line without line ending characters.

#### [settings] Section

extension

  This is the default file extension used when saving files, not including the period character (`.`). The extension used should match one of the patterns associated with that filetype (see Filetype extensions).

  Example: `extension=cxx`

wordchars

  These characters define word boundaries when making selections and searching using word matching options.

  Example: (look at system filetypes.* files)

comment_open

  A character or string which is used to comment code. If you want to use multiline comments, also set comment_close, otherwise leave it empty.

  Example: `comment_open=/*`

comment_close

  If multiline comments are used, this is the character or string to close the comment.

  Example: `comment_close=*/`

comment_use_indent

  Set this to false if a comment character or string should start at column 0 of a line. If set to true it uses any indentation of the line.

  Note: Comment indentation

  `comment_use_indent=true` would generate this if a line is commented (e.g. with Ctrl-D):

      #command_example();

  `comment_use_indent=false` would generate this if a line is commented (e.g. with Ctrl-D):

      #   command_example();

  Note: This setting only works for single line comments (like '//', '#' or ';').

  Example: `comment_use_indent=true`

context_action_cmd

  A command which can be executed on a certain word or the current selection. Example usage: Open the API documentation for the current function call at the cursor position. The command can be set for every filetype or if not set, a global command will be used. The command itself can be specified without the full path, then it is searched in $PATH. But for security reasons, it is recommended to specify the full path to the command. The wildcard %s will be replaced by the current word at the cursor position or by the current selection.

  Hint: for PHP files the following could be quite useful: context_action_cmd=firefox "http://www.php.net/%s"

  Example: `context_action_cmd=devhelp -s "%s"`

#### [build_settings] Section

compiler

  This item specifies the command to compile source code files. But it is also possible to use it with interpreted languages like Perl or Python. With these filetypes you can use this option as a kind of syntax parser, which sends output to the compiler message window.

  You should quote the filename to also support filenames with spaces. The following wildcards for filenames are available:

  - %f -- complete filename without path
  - %e -- filename without path and without extension

  Example: `compiler=gcc -Wall -c "%f"`

linker

  This item specifies the command to link the file. If the file is not already compiled, it will be compiled while linking. The -o option is automatically added by Geany. This item works well with GNU gcc, but may be problematic with other compilers (esp. with the linker).

  Example: `linker=gcc -Wall "%f"`

run_cmd

  Use this item to execute your file. It has to have been built already. Use the %e wildcard to have only the name of the executable (i.e. without extension) or use the %f wildcard if you need the complete filename, e.g. for shell scripts.

  Example: `run_cmd="./%e"`

### Special file filetypes.common

There is a special filetype definition file called filetypes.common. This file defines some general non-filetype-specific settings.

default

  This is the default style. It is used for styling files without a filetype set.

  Example: `default=0x000000;0xffffff;false;false`

selection

  The style for colouring selected text. The format is:

  - Foreground colour
  - Background colour
  - Use foreground colour
  - Use background colour

  The colours are only set if the 3rd or 4th argument is true. When the colours are not overridden, the default is a dark grey background with syntax highlighted foreground text.

  Example: `selection=0xc0c0c0;0x00007F;true;true`

brace_good

  The style for brace highlighting when a matching brace was found.

  Example: `brace_good=0xff0000;0xFFFFFF;true;false`

brace_bad

  The style for brace highlighting when no matching brace was found.

  Example: `brace_bad=0x0000ff;0xFFFFFF;true;false`

caret

  The style for colouring the caret(the blinking cursor). Only the first argument is interpreted.

  Example: `caret=0x000000;0x0;false;false`

caret_width

  The width for the caret(the blinking cursor). Only the first argument is interpreted. The width is specified in pixels with a maximum of three pixel. Use the width 0 to make the caret invisible.

  Example: `caret=1;0;false;false`

current_line

  The style for colouring the background of the current line. Only the second and third arguments are interpreted. The second argument is the background colour. Use the third argument to enable or disable background highlighting for the current line (has to be true/false).

  Example: `current_line=0x0;0xe5e5e5;true;false`

indent_guide

  The style for colouring the indentation guides. Only the first and second arguments are interpreted.

  Example: `indent_guide=0xc0c0c0;0xffffff;false;false`

white_space

  The style for colouring the white space if it is shown. The first both arguments define the foreground and background colours, the third argument sets whether to use the defined foreground colour or to use the colour defined by each filetype for the white space. The fourth argument defines whether to use the background colour.

  Example: `white_space=0xc0c0c0;0xffffff;true;true`

folding_style

  The style of folding icons. Only first and second arguments are used.

  Valid values for the first argument are:

  - 1 -- for boxes
  - 2 -- for circles

  Valid values for the second argument are:

  - 1 -- for straight lines
  - 2 -- for curved lines

  Example: `folding_style=1;1;false;false`

folding_horiz_line

  Draw a thin horizontal line at the line where text is folded. Only first argument is used.

  Valid values for the first argument are:

  - 0 -- disable, do not draw a line
  - 1 -- draw the line above folded text
  - 2 -- draw the line below folded text

  Example: `folding_horiz_line=0;0;false;false`

invert_all

  Whether to invert all defined colours. This is useful if you like a dark background colour(e.g. black) and do not want to change every single line. Please note, at time of writing this was only tested with the C syntax highlighting.

  Only first argument is interpreted. Set it to 1 to invert all colours.

  Example: `invert_all=0;0;false;false`

whitespace_chars

  Characters to treat as whitespace. These characters are ignored when moving, selecting and deleting across word boundaries (see Scintilla keyboard commands).

  This should include space (\s) and tab (\t).

  Example: `whitespace_chars=\s\t!\"#$%&'()*+,-./:;<=>?@[\\]^`{|}~`

## Filetype extensions

To change the default filetype extension used when saving a new file, see Filetype definition files.

You can override the list of file extensions that Geany uses for each filetype using the `filetype_extensions.conf` file.

To override the system-wide configuration file, copy it from `$prefix/share/geany` to your configuration directory, usually `~/.geany/`. `$prefix` is the path where Geany is installed (commonly `/usr/local`).

For example:

    % cp /usr/local/share/geany/filetype_extensions.conf /home/username/.geany/

Then edit it and remove all the lines for filetype extensions that you do not want to override. The remaining lines can be edited after the `=` sign, using a semi-colon separated list of patterns which should be matched for that filetype.

For example, to set the filetype extensions for Make, the `/home/username/.geany/filetype_extensions.conf` file should look like:

    [Extensions]
    Make=Makefile*;*.mk;Buildfile;

## Templates

Geany supports the following templates:

- ChangeLog entry
- File header
- Function description
- Short GPL notice
- Short BSD notice
- Filetype template

To use these templates, just open the Edit menu or open the popup menu by right-clicking in the editor widget, and choose "Insert Comments" and insert templates as you want.

Some templates (like File header or ChangeLog entry) will always be inserted at the top of the file.

To insert a function description, the cursor must be inside of the function, so that the function name can be determined automatically. The description will be positioned correctly one line above the function, just check it out. If the cursor is not inside of a function or the function name cannot be determined, the inserted function description won't contain the correct function name but "unknown" instead.

### Template metadata

Metadata can be used with all templates, but by default user set metadata is only used for the ChangeLog and File header templates.

In the configuration dialog you can find a tab "Templates" (see Template tab in preferences dialog). You can define the default values which will be inserted in the templates. You should restart Geany after making changes, because they are only read at startup.

### Filetype templates

Filetype templates are templates used as the basis of a new file. To use them, choose the New (with Template) menu item from the File menu.

By default, templates are created for some filetypes. Other filetype templates can be added by creating the appropriate template file and restarting Geany. You can also edit the default filetype templates.

Filetype template files are read from the `~/.geany/templates` directory, and are named "filetype." followed by the filetype name, e.g. "filetype.python", "filetype.sh", etc. If you are unsure about the filetype name extensions, they are the same as the filetype configuration file extensions, commonly installed in `/usr/share/geany`, with the prefix "filetypes.".

The file's contents are just the text to place in the document, except for the optional `{fileheader}` template wildcard. This can be placed anywhere, but is usually on the first line of the file, followed by a blank line.

There is also a template file `template.none` which is used when the New command is used without a filetype. This is empty by default.

### Customizing templates

Each template can be customized to your needs. The templates are stored in the `~/.geany/templates/` directory (see the section called Command line options for further information about the configuration directory). Just open the desired template with an editor (ideally, Geany ;-) ) and edit the template to your needs. There are some wildcards which will be automatically replaced by Geany at startup.

#### Template wildcards

All wildcards must be enclosed by "{" and "}", e.g. {date}.

Wildcard | Description | Available in
--- | --- | ---
developer | The name of the developer. | filetypes, file header, function description, ChangeLog entry, bsd, gpl
initial | The developer's initials, e.g. "ET" for Enrico Tröger or "JFD" for John Foobar Doe. | filetypes, file header, function description, ChangeLog entry, bsd, gpl
mail | The email address of the developer. | file header, function description, ChangeLog entry, bsd, gpl
company | The company the developer is working for. | filetypes, file header, function description, ChangeLog entry, bsd, gpl
year | The current year in the format: YYYY. | filetypes, file header, function description, ChangeLog entry, bsd, gpl
version | The initial version of a new file. | filetypes, file header, function description, ChangeLog entry, bsd, gpl
date | The current date in the format: YYYY-MM-DD. | filetypes, file header, function description, ChangeLog entry, bsd, gpl
untitled | The string "untitled" (this will be translated to your locale), used in filetype templates. | filetypes, file header, function description, ChangeLog entry, bsd, gpl
geanyversion | The actual Geany version, e.g. "Geany 0.13". | filetypes, file header, function description, ChangeLog entry, bsd, gpl
datetime | The current date and time in the format: DD.MM.YYYY HH:mm:ss ZZZZ. | file header, function description
filename | The filename of the current file. | file header
gpl | This wildcard inserts a short GPL notice. | file header
bsd | This wildcard inserts a BSD licence notice. | file header
functionname | The function name of the function at the cursor position. This wildcard will only be replaced in the function description template. | function description
fileheader | The file header template. This wildcard will only be replaced in filetype templates. | filetypes

# Contributing to this document

This document (`geany.txt`) is written in reStructuredText (or "reST"). The source file for it is located in Geany's `doc` subdirectory. If you intend on making changes, you should grab the source right from SVN to make sure you've got the newest version. After editing the file, to build the HTML document to see how your changes look, run "`make doc`" in the subdirectory `doc` of Geany's source directory. This regenerates the `geany.html` file. To generate a PDF file, use the command "`make pdf`" which should generate a file called geany-0.13.pdf.

After you are happy with your changes, create a patch:

    % svn diff geany.txt > foo.patch

and then submit that file to the mailing list for review.

Note, you will need the Python docutils software package installed to build the docs. The package is named `python-docutils` on Debian and Fedora systems.

# Scintilla keyboard commands

Copyright © 1998, 2006 Neil Hodgson <neilh(at)scintilla(dot)org>

This appendix is distributed under the terms of the License for Scintilla and SciTE. A copy of this license can be found in the file `scintilla/License.txt` included with the source code of this program and in the appendix of this document. See License for Scintilla and SciTE.

20 June 2006

## Keyboard commands

Keyboard commands for Scintilla mostly follow common Windows and GTK+ conventions. All move keys (arrows, page up/down, home and end) allows to extend or reduce the stream selection when holding the Shift key, and the rectangular selection when holding the Shift and Ctrl keys. Some keys may not be available with some national keyboards or because they are taken by the system such as by a window manager on GTK+. Keyboard equivalents of menu commands are listed in the menus. Some less common commands with no menu equivalent are:

Action | Shortcut key
--- | ---
Magnify text size. | Ctrl+Keypad+
Reduce text size. | Ctrl+Keypad-
Restore text size to normal. | Ctrl+Keypad/
Indent block. | Tab
Dedent block. | Shift+Tab
Delete to start of word. | Ctrl+BackSpace
Delete to end of word. | Ctrl+Delete
Delete to start of line. | Ctrl+Shift+BackSpace
Delete to end of line. | Ctrl+Shift+Delete
Go to start of document. | Ctrl+Home
Extend selection to start of document. | Ctrl+Shift+Home
Go to start of display line. | Alt+Home
Extend selection to start of display line. | Alt+Shift+Home
Go to end of document. | Ctrl+End
Extend selection to end of document. | Ctrl+Shift+End
Go to end of display line. | Alt+End
Extend selection to end of display line. | Alt+Shift+End
Scroll up. | Alt+Up
Scroll down. | Alt+Down
Previous paragraph. Shift extends selection. | Ctrl+Up
Next paragraph. Shift extends selection. | Ctrl+Down
Previous word. Shift extends selection. | Ctrl+Left
Next word. Shift extends selection. | Ctrl+Right
Previous word part. | Ctrl+/
Next word part. | Ctrl+\

# Hidden preferences

There are some uncommon preferences that are not shown in the Preferences dialog. These can be set by editing `~/.geany/geany.conf`, then restarting Geany. Search for the key name, then edit the value. Example:

> `brace_match_ltgt=true`

The table below show the key names of hidden preferences in the configuration file.

Key | Description | Default
--- | --- | ---
[editor] |  |
brace_match_ltgt | Whether to highlight <, > angle brackets. | false
show_editor_scrollbars | Whether to display scrollbars when the editor window is bigger than the display. | true
use_tab_to_indent | Whether pressing tab when a line is selected will indent the line. | true
use_gtk_word_boundaries | Whether to look for the end of a word when using word-boundary related Scintilla commands (see Scintilla keyboard commands). | true
auto_complete_whilst_editing | Whether to allow autocompletion when editing an existing line. | false
[interface] |  |
show_symbol_list_expanders | Whether to show or hide the small expander icons on the symbol list treeview (only available with GTK 2.12 or above). | true

# Compile-time options

There are some options which can only be changed at compile time. To change these options, edit the file src/geany.h. Look for a block of lines starting with `#define GEANY_*`. Any definitions which are not listed here should not be changed.

Note

Most users should not need to change these options.

Option | Description | Default
--- | --- | ---
GEANY_WORDCHARS | These characters define word boundaries when making selections and searching using word matching options. | look at sourcecode
GEANY_MAX_AUTOCOMPLETE_WORDS | How many auto completion suggestions should Geany provide. | 30
GEANY_MAX_AUTOCOMPLETE_HEIGHT | How many suggestions should be visible in the auto completion list. | 10
GEANY_MIN_SYMBOLLIST_CHARS | How many characters you need to type to trigger the auto completion list. | 4
GEANY_PROJECT_EXT | The default filename extension for Geany project files. It is used when creating new projects and as filter mask for the project open dialog. | geany
GEANY_STRING_UNTITLED | A string used as the default name for new files. Be aware that the string can be translated, so change it only if you know what you are doing. | untitled
GEANY_CHECK_FILE_DELAY | Time in seconds between checking a file for external changes. | 30
GEANY_TOGGLE_MARK | A string which is used to mark a toggled comment. external changes. | "~ "
GEANY_WINDOW_MINIMAL_WIDTH | The minimal width of the main window. | 620
GEANY_WINDOW_MINIMAL_HEIGHT | The minimal height of the main window. | 440
GEANY_WINDOW_DEFAULT_WIDTH | The default width of the main window at the first start. | 900
GEANY_WINDOW_DEFAULT_HEIGHT | The default height of the main window at the first start. | 600
Default values |  |
GEANY_DEFAULT_TOOLS_MAKE | The make tool. This can also include a path. | "make"
GEANY_DEFAULT_TOOLS_TERMINAL | A terminal emulator. It has to accept the command line option "-e". This can also include a path. | "xterm"
GEANY_DEFAULT_TOOLS_BROWSER | A web browser. This can also include a path. | "firefox"
GEANY_DEFAULT_TOOLS_PRINTCMD | A printing tool. It should be able to accept and process plain text files. This can also include a path. | "lpr"
GEANY_DEFAULT_TOOLS_GREP | A grep tool. It should be compatible with GNU grep. This can also include a path. | "grep"
GEANY_DEFAULT_MRU_LENGHTH | The length of the "Recent files" list. | 10
GEANY_DEFAULT_FONT_SYMBOL_LIST | The font used in sidebar to show symbols and open files. | "Sans 9"
GEANY_DEFAULT_FONT_MSG_WINDOW | The font used in the messages window. | "Sans 9"
GEANY_DEFAULT_FONT_EDITOR | The font used in the editor window. | "Monospace 10"
Windows specific |  |
GEANY_USE_WIN32_DIALOG | Set this to 1 if you want to use the default Windows file open and save dialogs instead GTK's file open and save dialogs. The default Windows file dialogs are missing some nice features like choosing a filetype or an encoding. Do not touch this setting when building on a non-Win32 system. | 0

# GNU General Public License

                GNU GENERAL PUBLIC LICENSE
                   Version 2, June 1991

     Copyright (C) 1989, 1991 Free Software Foundation, Inc.
        51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
     Everyone is permitted to copy and distribute verbatim copies
     of this license document, but changing it is not allowed.

                    Preamble

      The licenses for most software are designed to take away your
    freedom to share and change it.  By contrast, the GNU General Public
    License is intended to guarantee your freedom to share and change free
    software--to make sure the software is free for all its users.  This
    General Public License applies to most of the Free Software
    Foundation's software and to any other program whose authors commit to
    using it.  (Some other Free Software Foundation software is covered by
    the GNU Library General Public License instead.)  You can apply it to
    your programs, too.

      When we speak of free software, we are referring to freedom, not
    price.  Our General Public Licenses are designed to make sure that you
    have the freedom to distribute copies of free software (and charge for
    this service if you wish), that you receive source code or can get it
    if you want it, that you can change the software or use pieces of it
    in new free programs; and that you know you can do these things.

      To protect your rights, we need to make restrictions that forbid
    anyone to deny you these rights or to ask you to surrender the rights.
    These restrictions translate to certain responsibilities for you if you
    distribute copies of the software, or if you modify it.

      For example, if you distribute copies of such a program, whether
    gratis or for a fee, you must give the recipients all the rights that
    you have.  You must make sure that they, too, receive or can get the
    source code.  And you must show them these terms so they know their
    rights.

      We protect your rights with two steps: (1) copyright the software, and
    (2) offer you this license which gives you legal permission to copy,
    distribute and/or modify the software.

      Also, for each author's protection and ours, we want to make certain
    that everyone understands that there is no warranty for this free
    software.  If the software is modified by someone else and passed on, we
    want its recipients to know that what they have is not the original, so
    that any problems introduced by others will not reflect on the original
    authors' reputations.

      Finally, any free program is threatened constantly by software
    patents.  We wish to avoid the danger that redistributors of a free
    program will individually obtain patent licenses, in effect making the
    program proprietary.  To prevent this, we have made it clear that any
    patent must be licensed for everyone's free use or not licensed at all.

      The precise terms and conditions for copying, distribution and
    modification follow.

                GNU GENERAL PUBLIC LICENSE
       TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION

      0. This License applies to any program or other work which contains
    a notice placed by the copyright holder saying it may be distributed
    under the terms of this General Public License.  The "Program", below,
    refers to any such program or work, and a "work based on the Program"
    means either the Program or any derivative work under copyright law:
    that is to say, a work containing the Program or a portion of it,
    either verbatim or with modifications and/or translated into another
    language.  (Hereinafter, translation is included without limitation in
    the term "modification".)  Each licensee is addressed as "you".

    Activities other than copying, distribution and modification are not
    covered by this License; they are outside its scope.  The act of
    running the Program is not restricted, and the output from the Program
    is covered only if its contents constitute a work based on the
    Program (independent of having been made by running the Program).
    Whether that is true depends on what the Program does.

      1. You may copy and distribute verbatim copies of the Program's
    source code as you receive it, in any medium, provided that you
    conspicuously and appropriately publish on each copy an appropriate
    copyright notice and disclaimer of warranty; keep intact all the
    notices that refer to this License and to the absence of any warranty;
    and give any other recipients of the Program a copy of this License
    along with the Program.

    You may charge a fee for the physical act of transferring a copy, and
    you may at your option offer warranty protection in exchange for a fee.

      2. You may modify your copy or copies of the Program or any portion
    of it, thus forming a work based on the Program, and copy and
    distribute such modifications or work under the terms of Section 1
    above, provided that you also meet all of these conditions:

        a) You must cause the modified files to carry prominent notices
        stating that you changed the files and the date of any change.

        b) You must cause any work that you distribute or publish, that in
        whole or in part contains or is derived from the Program or any
        part thereof, to be licensed as a whole at no charge to all third
        parties under the terms of this License.

        c) If the modified program normally reads commands interactively
        when run, you must cause it, when started running for such
        interactive use in the most ordinary way, to print or display an
        announcement including an appropriate copyright notice and a
        notice that there is no warranty (or else, saying that you provide
        a warranty) and that users may redistribute the program under
        these conditions, and telling the user how to view a copy of this
        License.  (Exception: if the Program itself is interactive but
        does not normally print such an announcement, your work based on
        the Program is not required to print an announcement.)

    These requirements apply to the modified work as a whole.  If
    identifiable sections of that work are not derived from the Program,
    and can be reasonably considered independent and separate works in
    themselves, then this License, and its terms, do not apply to those
    sections when you distribute them as separate works.  But when you
    distribute the same sections as part of a whole which is a work based
    on the Program, the distribution of the whole must be on the terms of
    this License, whose permissions for other licensees extend to the
    entire whole, and thus to each and every part regardless of who wrote it.

    Thus, it is not the intent of this section to claim rights or contest
    your rights to work written entirely by you; rather, the intent is to
    exercise the right to control the distribution of derivative or
    collective works based on the Program.

    In addition, mere aggregation of another work not based on the Program
    with the Program (or with a work based on the Program) on a volume of
    a storage or distribution medium does not bring the other work under
    the scope of this License.

      3. You may copy and distribute the Program (or a work based on it,
    under Section 2) in object code or executable form under the terms of
    Sections 1 and 2 above provided that you also do one of the following:

        a) Accompany it with the complete corresponding machine-readable
        source code, which must be distributed under the terms of Sections
        1 and 2 above on a medium customarily used for software interchange; or,

        b) Accompany it with a written offer, valid for at least three
        years, to give any third party, for a charge no more than your
        cost of physically performing source distribution, a complete
        machine-readable copy of the corresponding source code, to be
        distributed under the terms of Sections 1 and 2 above on a medium
        customarily used for software interchange; or,

        c) Accompany it with the information you received as to the offer
        to distribute corresponding source code.  (This alternative is
        allowed only for noncommercial distribution and only if you
        received the program in object code or executable form with such
        an offer, in accord with Subsection b above.)

    The source code for a work means the preferred form of the work for
    making modifications to it.  For an executable work, complete source
    code means all the source code for all modules it contains, plus any
    associated interface definition files, plus the scripts used to
    control compilation and installation of the executable.  However, as a
    special exception, the source code distributed need not include
    anything that is normally distributed (in either source or binary
    form) with the major components (compiler, kernel, and so on) of the
    operating system on which the executable runs, unless that component
    itself accompanies the executable.

    If distribution of executable or object code is made by offering
    access to copy from a designated place, then offering equivalent
    access to copy the source code from the same place counts as
    distribution of the source code, even though third parties are not
    compelled to copy the source along with the object code.

      4. You may not copy, modify, sublicense, or distribute the Program
    except as expressly provided under this License.  Any attempt
    otherwise to copy, modify, sublicense or distribute the Program is
    void, and will automatically terminate your rights under this License.
    However, parties who have received copies, or rights, from you under
    this License will not have their licenses terminated so long as such
    parties remain in full compliance.

      5. You are not required to accept this License, since you have not
    signed it.  However, nothing else grants you permission to modify or
    distribute the Program or its derivative works.  These actions are
    prohibited by law if you do not accept this License.  Therefore, by
    modifying or distributing the Program (or any work based on the
    Program), you indicate your acceptance of this License to do so, and
    all its terms and conditions for copying, distributing or modifying
    the Program or works based on it.

      6. Each time you redistribute the Program (or any work based on the
    Program), the recipient automatically receives a license from the
    original licensor to copy, distribute or modify the Program subject to
    these terms and conditions.  You may not impose any further
    restrictions on the recipients' exercise of the rights granted herein.
    You are not responsible for enforcing compliance by third parties to
    this License.

      7. If, as a consequence of a court judgment or allegation of patent
    infringement or for any other reason (not limited to patent issues),
    conditions are imposed on you (whether by court order, agreement or
    otherwise) that contradict the conditions of this License, they do not
    excuse you from the conditions of this License.  If you cannot
    distribute so as to satisfy simultaneously your obligations under this
    License and any other pertinent obligations, then as a consequence you
    may not distribute the Program at all.  For example, if a patent
    license would not permit royalty-free redistribution of the Program by
    all those who receive copies directly or indirectly through you, then
    the only way you could satisfy both it and this License would be to
    refrain entirely from distribution of the Program.

    If any portion of this section is held invalid or unenforceable under
    any particular circumstance, the balance of the section is intended to
    apply and the section as a whole is intended to apply in other
    circumstances.

    It is not the purpose of this section to induce you to infringe any
    patents or other property right claims or to contest validity of any
    such claims; this section has the sole purpose of protecting the
    integrity of the free software distribution system, which is
    implemented by public license practices.  Many people have made
    generous contributions to the wide range of software distributed
    through that system in reliance on consistent application of that
    system; it is up to the author/donor to decide if he or she is willing
    to distribute software through any other system and a licensee cannot
    impose that choice.

    This section is intended to make thoroughly clear what is believed to
    be a consequence of the rest of this License.

      8. If the distribution and/or use of the Program is restricted in
    certain countries either by patents or by copyrighted interfaces, the
    original copyright holder who places the Program under this License
    may add an explicit geographical distribution limitation excluding
    those countries, so that distribution is permitted only in or among
    countries not thus excluded.  In such case, this License incorporates
    the limitation as if written in the body of this License.

      9. The Free Software Foundation may publish revised and/or new versions
    of the General Public License from time to time.  Such new versions will
    be similar in spirit to the present version, but may differ in detail to
    address new problems or concerns.

    Each version is given a distinguishing version number.  If the Program
    specifies a version number of this License which applies to it and "any
    later version", you have the option of following the terms and conditions
    either of that version or of any later version published by the Free
    Software Foundation.  If the Program does not specify a version number of
    this License, you may choose any version ever published by the Free Software
    Foundation.

      10. If you wish to incorporate parts of the Program into other free
    programs whose distribution conditions are different, write to the author
    to ask for permission.  For software which is copyrighted by the Free
    Software Foundation, write to the Free Software Foundation; we sometimes
    make exceptions for this.  Our decision will be guided by the two goals
    of preserving the free status of all derivatives of our free software and
    of promoting the sharing and reuse of software generally.

                    NO WARRANTY

      11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
    FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
    OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
    PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
    OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
    MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
    TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
    PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
    REPAIR OR CORRECTION.

      12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
    WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
    REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
    INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
    OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
    TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
    YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
    PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
    POSSIBILITY OF SUCH DAMAGES.

                 END OF TERMS AND CONDITIONS

            How to Apply These Terms to Your New Programs

      If you develop a new program, and you want it to be of the greatest
    possible use to the public, the best way to achieve this is to make it
    free software which everyone can redistribute and change under these terms.

      To do so, attach the following notices to the program.  It is safest
    to attach them to the start of each source file to most effectively
    convey the exclusion of warranty; and each file should have at least
    the "copyright" line and a pointer to where the full notice is found.

        <one line to give the program's name and a brief idea of what it does.>
        Copyright (C) <year>  <name of author>

        This program is free software; you can redistribute it and/or modify
        it under the terms of the GNU General Public License as published by
        the Free Software Foundation; either version 2 of the License, or
        (at your option) any later version.

        This program is distributed in the hope that it will be useful,
        but WITHOUT ANY WARRANTY; without even the implied warranty of
        MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
        GNU General Public License for more details.

        You should have received a copy of the GNU General Public License
        along with this program; if not, write to the Free Software
        Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA

    Also add information on how to contact you by electronic and paper mail.

    If the program is interactive, make it output a short notice like this
    when it starts in an interactive mode:

        Gnomovision version 69, Copyright (C) year  name of author
        Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
        This is free software, and you are welcome to redistribute it
        under certain conditions; type `show c' for details.

    The hypothetical commands `show w' and `show c' should show the appropriate
    parts of the General Public License.  Of course, the commands you use may
    be called something other than `show w' and `show c'; they could even be
    mouse-clicks or menu items--whatever suits your program.

    You should also get your employer (if you work as a programmer) or your
    school, if any, to sign a "copyright disclaimer" for the program, if
    necessary.  Here is a sample; alter the names:

      Yoyodyne, Inc., hereby disclaims all copyright interest in the program
      `Gnomovision' (which makes passes at compilers) written by James Hacker.

      <signature of Ty Coon>, 1 April 1989
      Ty Coon, President of Vice

    This General Public License does not permit incorporating your program into
    proprietary programs.  If your program is a subroutine library, you may
    consider it more useful to permit linking proprietary applications with the
    library.  If this is what you want to do, use the GNU Library General
    Public License instead of this License.

# License for Scintilla and SciTE

Copyright 1998-2003 by Neil Hodgson <neilh(at)scintilla(dot)org>

All Rights Reserved

Permission to use, copy, modify, and distribute this software and its documentation for any purpose and without fee is hereby granted, provided that the above copyright notice appear in all copies and that both that copyright notice and this permission notice appear in supporting documentation.

NEIL HODGSON DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL NEIL HODGSON BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.